Casio Exilim Ex Fh100 Users Guide

							161Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform 
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * Screen
Procedure
[MENU] * Set Up Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 156).
For information about menu operations, see page 89.
Adjusting Monitor Screen Brightness (Screen)
Auto 2/
Auto 1With this setting, the camera detects available light levels and 
automatically adjusts the brightness of the monitor screen accordingly. 
“Auto 2” changes monitor screen brightness relatively more quickly than 
“Auto 1” when surrounding light is bright.
+2Brightness that is greater than +1, which makes the screen easier to view. 
This setting consumes more power.
+1Bright setting for outdoor use, etc. Brightness that is greater than 0.
0Normal monitor screen brightness for indoor use, etc.
Turning off Eye-Fi Card Communication (Eye-Fi)
Downloaded From camera-usermanual.com Casio Manuals 
						

							162Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Auto Rotate
The camera automatically detects whether a snapshot image was shot in portrait or 
landscape orientation and displays it accordingly. Auto rotation is not performed for 
movies.
Procedure
[MENU] * Set Up Tab * Sounds
• Setting a volume level of 0 mutes output.
Auto Image Orientation Detection and Rotation (Auto Rotate)
OnAutomatically rotates snapshots shot with the camera held vertically 90 
degrees.
OffImages not rotated automatically.
Configuring Camera Sound Settings (Sounds)
Startup
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
 OperationSpecifies the sound volume. This setting is also used as the 
audio level during video output (page 115).
 PlaySpecifies the volume of movie audio output. This volume 
setting is not used during video output (from the USB/AV port) 
(page 115).
=
=
Downloaded From camera-usermanual.com Casio Manuals 
						

							163Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial 
number used in file names (page 158).
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different 
from your Home City when you go on a trip, etc. World Time displays the current time 
in 162 cities in 32 time zones around the globe.
1.Use [8] and [2] to select “World” and then press [6].
• To change the geographic area and city for the time where you normally use 
the camera, select “Home”.
2.Use [8] and [2] to select “City” and then press [6].
• To change the “World” setting to summer time, use [8] and [2] to select 
“DST” and then select “On”. Summer time is used in some geographical areas 
to advance the current time setting by one hour during the summer months.
Specifying the File Name Serial Number Generation Rule 
(File No.)
ContinueTells the camera to remember the last used file number. A new file will 
be named using the next sequential number, even if files are deleted or 
if a blank memory card is loaded. If a memory card is loaded and that 
card already has files stored on it and the largest sequential number in 
the existing file names is greater than the largest sequential number 
remembered by the camera, numbering of new files will start from the 
largest sequential number in the memory card file names plus 1.
ResetRestarts the serial number from 0001 whenever all files are deleted or 
when the memory card is replaced with a blank one. If a memory card 
is loaded and that card already has files stored on it, numbering of new 
files will start from the largest sequential number in the memory card 
file names plus 1.
Configuring World Time Settings (World Time)
Downloaded From camera-usermanual.com Casio Manuals 
						

							164Other Settings (Set Up)
3.Use [8], [2], [4], and [6] to select the geographic area you want and 
then press [SET].
4.Use [8] and [2] to select the city you want and then press [SET].
5.Press [SET].
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is 
the place where you live or normally use the camera. If it isn’t, select “Home” on the 
screen in step 1 and configure the Home City, date, and time settings as required 
(page 165).
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in 
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or 
deleted.
Example: July 10, 2012, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later 
using the DPOF function or some printing application (page 139).
• Stamping is performed in accordance with the date and time settings (page 165) 
and the display style settings (page 165).
Time Stamping Snapshots (Timestamp)
Date2012/7/10
Date&Time2012/7/10 1:25pm
OffNo stamping of date and/or time
Downloaded From camera-usermanual.com Casio Manuals 
						

							165Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Adjust
When the date and time settings are what you want, select “Apply” and then press 
[SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 163) before setting the time and date. If 
you set the time and date while the wrong city is selected for your Home City, the 
times and dates of all of the World Time cities (page 163) will be wrong.
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three different styles for the date.
Example: July 10, 2012
• This setting also affects the control panel date format as shown below (page 35).
YY/MM/DD or MM/DD/YY: MM/DD
DD/MM/YY: DD/MM
Setting the Camera’s Clock (Adjust)
[8] [2]Change the setting at the cursor location
[4] [6]Move the cursor between settings
Zoom 
controllerToggles between 12-hour and 24-hour format
Specifying the Date Style (Date Style)
YY/MM/DD12/7/10
DD/MM/YY10/7/12
MM/DD/YY7/10/12
Downloaded From camera-usermanual.com Casio Manuals 
						

							166Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Language
.Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
• Camera models sold in certain geographic areas 
may not support display language selection.
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed 
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is 
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During a slideshow
– During movie recording and playback
– During Move Out CS or Move In CS auto record standby
– When both sleep and Auto Power Off are turned on, Auto Power Off takes 
priority.
Specifying the Display Language (Language)
Configuring Sleep State Settings (Sleep)
1
23
Downloaded From camera-usermanual.com Casio Manuals 
						

							167Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for 
a preset amount of time.
Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in 
the PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During CS group playback
– During movie recording and playback
– During Move Out CS or Move In CS auto record standby
Procedure
[MENU] * Set Up Tab * REC/PLAY
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC 
mode or [p] (PLAY) in the PLAY mode.
• Change this setting to “Power On” or “Power On/Off” before connecting to a TV for 
image viewing.
Configuring Auto Power Off Settings (Auto Power Off)
Configuring [r] and [p] Settings (REC/PLAY)
Power OnCamera turns on whenever [r] (REC) or [p] (PLAY) is 
pressed.
Power On/OffCamera turns on or off whenever [r] (REC) or [p] (PLAY) is 
pressed.
DisableCamera does not turn on or off when [r] (REC) or [p] (PLAY) 
is pressed.
Downloaded From camera-usermanual.com Casio Manuals 
						

							168Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is 
used when exchanging data with a computer, printer, or other external device.
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video 
output system. You can also specify an aspect ratio of 4:3 or 16:9.
• Output to a TV is not supported while the camera is in the REC mode.
• When the camera is connected to a TV for movie playback, only movie images are 
displayed on the TV screen. The camera’s monitor screen will show on-screen 
information only (without any movie image).
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. 
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting 
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC 
or PAL.
Configuring USB Protocol Settings (USB)
Mass StorageSelect this setting when connecting to a computer (pages 143, 
152). With this setting, the computer sees the camera as an 
external storage device. Use this setting for normal transfer of 
images from the camera to a computer.
PTP 
(PictBridge)Select this setting when connecting to a printer that supports 
PictBridge (page 133).
Selecting the Screen Aspect Ratio and Video Output System 
(Video Out)
NTSCVideo system used in Japan, the U.S., and other countries
PALVideo system used in Europe and other areas
4:3Normal TV screen aspect ratio
16:9Wide screen aspect ratio
Downloaded From camera-usermanual.com Casio Manuals 
						

							169Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * HDMI Output
• See page 119 for details.
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p] 
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the 
special startup image provided in the camera’s built-in memory.
• Formatting built-in memory (page 170) will delete the current startup image setting.
• You can select the first snapshot of a CS group as the startup image. If you want to 
select another image within a CS group, you need to first divide up the CS group or 
use the CS Frame Edit feature to make a copy of the image outside of the CS 
group.
Selecting the HDMI Terminal Output Method (HDMI Output)
Configuring a Startup Image (Startup)
Downloaded From camera-usermanual.com Casio Manuals 
						

							170Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card. 
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in 
memory. It cannot be undone. Make sure you do not need any data currently on 
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
– BEST SHOT user setups
– Startup screen
• Formatting a memory card will delete the following data.
– Protected images
• Check the battery level before starting a format operation and make sure it is not 
too low. Formatting may not be performed correctly and the camera may stop 
operating normally if the camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress. Doing so can cause 
the camera to stop operating normally.
Procedure
[MENU] * Set Up Tab * Reset
See page 185 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language, video output
Formatting Built-in Memory or a Memory Card (Format)
Resetting the Camera to Factory Defaults (Reset)
Downloaded From camera-usermanual.com Casio Manuals