Casio Exilim Ex Fh100 Users Guide

							141Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a 
computer.
*Windows only
The procedures you need to perform when using the camera with your computer and 
when using the bundled software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a 
computer and view 
them there• Save images and view them manually 
(USB connection) (pages 143, 152).
• Transfer images to a computer 
automatically over a wireless LAN for 
viewing (Eye-Fi) (page 156).
Transfer images 
stored on your 
computer to 
camera memory In addition to images, you also can transfer 
screen shot images from your computer to 
the camera (Photo Transport*) (page 150).
Play back and edit 
movies• You can play back movies (pages 147, 
155).
• To edit movies, use commercially 
available software as required.
• Windows users should refer to “Using the Camera with a Windows Computer” 
on page 142.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page 
152.
Downloaded From camera-usermanual.com Casio Manuals 
						

							142Using the Camera with a Computer
Install the required software in accordance with the version of Windows you are 
running and what you want to do.
*YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of 
Windows OS.
Using the Camera with a Windows Computer
When you want to 
do this:Operating System 
VersionInstall this software:See 
page:
Save images to a 
computer and view 
them there manuallyWindows 7 / Windows 
Vista / Windows XP / 
Windows 2000Installation not required. 143
Play moviesWindows 7 / Windows 
Vista / Windows XP / 
Windows 2000Installation not required.
• Windows Media Player, 
which is already installed 
on most computers, can be 
used for playback.
• If your computer is running 
Windows 2000 and does 
not have DirectX 9.0c or 
higher installed, download 
DirectX from the Microsoft 
DirectX site and install it on 
your computer.147
Edit moviesWindows 7 / Windows 
Vista / Windows XP / 
Windows 2000–
• Use commercial software 
as required.–
Upload movie files 
to YouTubeWindows 7 / Windows 
Vista / Windows XP 
(SP2/SP3) / 
Windows 2000 (SP4)YouTube Uploader for 
CASIO*148
Transfer images to 
the cameraWindows 7 / Windows 
Vista / Windows XP / 
Windows 2000Photo Transport 1.0*150
View the User’s 
GuideWindows Vista / 
Windows XP 
(SP2/SP3) / 
Windows 2000 (SP4)Adobe Reader 8
(Not required if already 
installed.)149
Downloaded From camera-usermanual.com Casio Manuals 
						

							143Using the Camera with a Computer
.Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the 
“Read me” file that comes with each application for details. Information about 
computer system requirements also can be found under “Computer System 
Requirements for Bundled Software” on page 184 of this manual.
.Precautions for Windows Users
• Except for Adobe Reader, the bundled software requires Administrator privileges to 
run.
• Operation under a dual-processor environment is not supported.
• Operation may not be possible under certain computer environments.
You can connect the camera to your computer in order to view and store images 
(snapshot and movie files).
.To connect the camera to your computer and save files
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “Mass Storage”, and then press [SET].
Viewing and Storing Images on a Computer
Downloaded From camera-usermanual.com Casio Manuals 
						

							144Using the Camera with a Computer
4.Turn off the camera and then use the USB cable that comes with the 
camera to connect it to your computer.
• The camera does not draw power over the USB cable. Check the battery level 
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• When connecting the USB cable to a USB port, make 
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the 
camera if you connect via a USB hub. Always connect 
directly to the computer’s USB port.
5.Turn on the camera.
6.Windows 7 / Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
Windows 2000 users: Doubleclick “My Computer”.
USB port
USB cable
Making sure that the 6 mark on the camera is aligned 
with the 4 mark of the USB cable connector, connect 
the cable to the camera.USB/AV port Large connector
Small connector
Terminal
cover
Downloaded From camera-usermanual.com Casio Manuals 
						

							145Using the Camera with a Computer
7.Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in 
memory if there is no card) as a removable disk.
8.Right-click the “DCIM” folder.
9.On the shortcut menu that appears, click “Copy”.
10.Windows 7 / Windows Vista users: Click “Start” and then 
“Documents”.
Windows XP users: Click “Start” and then “My Documents”.
Windows 2000 users: Doubleclick “My Documents” to open it.
• If you already have a “DCIM” folder in “Documents” (Windows 7 / 
Windows Vista) or “My Documents” (Windows XP / Windows 2000), the next 
step will overwrite it. If you want to keep the existing “DCIM” folder, you need to 
change its name or move it to a different location before performing the next 
step.
11.Windows 7 users: On the “Documents” “Organize” menu, select 
“Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select 
“Paste”.
Windows XP / Windows 2000 users: On the “My Documents” “Edit” 
menu, select “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your 
“Documents” (Windows 7 / Windows Vista) or “My Documents” (Windows XP / 
Windows 2000) folder. You now have a copy of the files that are in camera 
memory on your computer.
12.After you finish copying images, disconnect the camera from the 
computer.
Windows 7, Windows Vista, Windows XP
On the camera, press [ON/OFF] to turn off the camera. After making sure that the 
back lamp is unlit, disconnect the camera from the computer.
Windows 2000
Click card services in the task tray on your computer screen, and disable the 
drive number assigned to the camera. Next, after making sure that the back lamp 
is unlit, press the camera’s [ON/OFF] button to turn off the camera and 
disconnect the camera from your computer.
Downloaded From camera-usermanual.com Casio Manuals 
						

							146Using the Camera with a Computer
.To view images you copied to your computer
1.Double-click the copied “DCIM” folder to open it.
2.Double-click the folder that contains the images you want to view.
3.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 159.
• An image that was rotated on the camera will be displayed on your computer 
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually display the component 
images in the CS group. A CS group cannot be viewed as a CS image on a 
computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing 
images. Doing so can cause data to become corrupted. Never use your computer to modify, delete, move, or rename any image files 
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which 
will make it impossible to play back images on the camera and can drastically alter 
remaining memory capacity. Whenever you want to modify, delete, move, or 
rename an image, do so only on images that are stored on your computer.
Downloaded From camera-usermanual.com Casio Manuals 
						

							147Using the Camera with a Computer
Windows Media Player, which is already installed on most computers, can be used 
for movie playback. To play back a movie, first copy the movie to your computer and 
then double-click the movie file.
.Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back 
movies recorded with this camera on a computer.
• The above are recommended system environments. Configuring one of these 
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of 
movies.
.Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to 
play it. Proper movie playback may not be possible for data accessed over a 
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience 
problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Try upgrading Windows Media Player to the latest version.
– Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use the AV cable 
that comes bundled with the camera to connect to the video input terminal of a TV or 
computer and play back movies that way.
Playing Movies
Operating System : Windows 7 / Windows Vista / Windows XP / Windows 2000
CPU : Pentium 4  3.2 GHz or higher
Required Software : Windows Media Player, DirectX 9.0c or higher
Downloaded From camera-usermanual.com Casio Manuals 
						

							148Using the Camera with a Computer
Installing YouTube Uploader for CASIO from the CD-ROM that comes with your 
camera simplifies uploading of movie files you recorded with the “For YouTube” 
scene to YouTube.
.What is YouTube?
YouTube is a movie sharing site managed by YouTube, LLC where you can upload 
movies and view movies uploaded by others.
.To install YouTube Uploader for CASIO
1.On the CD-ROM menu screen, select “YouTube Uploader for CASIO”.
2.After reading the information about installation conditions and system 
requirements for installation in the “Read me” file, install YouTube 
Uploader for CASIO.
.To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube 
website (http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including neighboring copyrights) 
unless you yourself own the copyright or you have obtained the permission of the 
applicable copyright holder(s).
• The maximum file size for each upload is 1024MB or 10 minutes of playing time.
1.Record the movie you want to upload using the “For YouTube” scene 
(page 66).
2.If it isn’t already, connect your computer to the Internet.
3.Connect the camera to your computer (page 143).
4.Turn on the camera.
YouTube Uploader for CASIO will start up automatically.
• If this is the first time you are using the application, configure the YouTube user 
ID and network environment settings, and then click the [OK] button.
Uploading Movie Files to YouTube
Downloaded From camera-usermanual.com Casio Manuals 
						

							149Using the Camera with a Computer
5.The left side of the display will have an area for inputting a title, 
category, and other information required for uploading to YouTube. 
Enter the required information.
6.The right side of the display shows a list of movie files in camera 
memory. Select the check box next to the movie file you want to 
upload.
7.When everything is ready, click the [Upload] button.
This will upload the movie file(s) to YouTube.
• After uploading is complete, click the [Exit] button to exit the application.
1.Start up your computer, and place the bundled CD-ROM into its CD-
ROM drive.
Normally, this should cause the menu screen to appear automatically. If your 
computer does not display the menu screen automatically, navigate to the CD-
ROM on your computer and then double-click the “AutoMenu.exe” file.
2.On the menu screen, click the “Language” down arrow button and then 
select the language you want.
3.Click “Manual” to select it and then click “Digital Camera”.
IMPORTANT!
• You must have Adobe Reader or Adobe Acrobat Reader installed on your 
computer in order to view the contents of a PDF file. If you do not already have 
Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the 
bundled CD-ROM.
Viewing User Documentation (PDF Files)
Downloaded From camera-usermanual.com Casio Manuals 
						

							150Using the Camera with a Computer
If you want to transfer images from your computer to the camera, install Photo 
Transport on your computer from the CD-ROM that comes with the camera.
.To install Photo Transport
1.On the CD-ROM menu screen, select “Photo Transport”.
2.After reading the information about installation conditions and system 
requirements for installation in the “Read me” file, install Photo 
Transport.
.To transfer images to the camera
1.Connect the camera to your computer (page 143).
2.On your computer, click the following: Start * All Programs * 
CASIO * Photo Transport.
This starts up Photo Transport.
3.Drag the file(s) you want to transfer to the [Transfer] button.
4.Follow the instructions that appear on the display to complete the 
transfer.
• The details of the instructions that appear on the display and the transferred 
images will depend on your Photo Transport setup. For details, click the 
[Settings] button or [Help] button and check the setup.
Transfer Data
• Only image files with the following extensions can be transferred to the camera:
jpg, jpeg, jpe, bmp (bmp images are converted to jpeg images automatically when 
transferred.)
• Certain types of images may not be able to be transferred.
• You cannot transfer movies to the camera.
Transferring Images from Your Computer to Camera Memory
Downloaded From camera-usermanual.com Casio Manuals