Casio Exilim EX FH100 User Manual

81Using BEST SHOT
You can use these features to shoot an image automatically whenever the subject 
moves into or moves out of a frame on the monitor screen. You also can configure the 
camera to record images of what happened immediately before and after the subject 
moves.
.To setup the camera
1.In the REC mode, set the mode dial to b.
2.Press [SET].
3.Select “Move Out CS” or “Move In CS” and then press [SET].
4.Use [2] to select the fifth control panel option from the top 
(boundary location), and then...

82Using BEST SHOT
9.Use [4] and [6] to select the continuous shutter 
(CS) speed you want and then press [SET].
10.Use [8] and [2] to select the third control panel 
option from the bottom (Max CS shots).
11.Use [4] and [6] to select the maximum number of shots for each 
continuous shutter operation and then press [SET].
12.Use [8] and [2] to select the second control panel option from the 
bottom (Prerecord CS shots).
13.Use [4] and [6] to specify how many of the 30 images and for how 
long images...

83Using BEST SHOT
15.Use [4] and [6] to select the subject movement sensitivity, and then 
press [SET].
• You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”.
• Move Out CS Setting Guide
• Move In CS Setting Guide
• The approximate number of recordable CS 
images will appear on the monitor screen.
.To shoot using Move Out CS
1.Compose the image so the subject is within the boundary on the 
monitor screen.
2.Half-press the shutter button.
• The camera will adjust exposure and...

84Using BEST SHOT
4.Image recording will continue until the end of the recording time is 
reached.
• While the camera is in Move Out CS recording standby, you can cancel 
standby by pressing the shutter button all the way down. You then will be able 
to shoot images normally.
• To stop an ongoing real-time recording operation, press [SET].
5.Save the CS images (page 56).
.To shoot using Move In CS
1.Compose the image at a location where you expect the subject to enter 
the boundary on the monitor...

85Using BEST SHOT
5.Save the CS images (page 56).
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash 
Off).
• Shooting with this BEST SHOT scene makes the shooting range narrower than 
normal.
• The Self-timer cannot be used with this BEST SHOT scene.
• Compose the image so the entire subject and its background are within the 
boundary. Recording may not be performed correctly if there is little difference 
between the subject and the part of the background enclosed by the...

86Using BEST SHOT
The High Speed CS capabilities provide you with a variety of BEST SHOT options to 
suite exactly the type of image you are trying to record. Images continue to be shot as 
long as you keep the shutter button depressed, with the shooting speed optimized 
according to the BEST SHOT scene you are using.
Prerecord CS (page 51) pre-records images when you half-press the shutter button. 
Then when you press the shutter button the rest of the way down, the camera stores 
what is currently in...

87Using BEST SHOT
4.Half-press and hold the shutter button to start pre-recording of images.
A preset number of images are pre-recorded. The pre-recorded images are 
continually updated until you full-press the shutter button.
• If you release the half-pressed shutter button before pressing it the rest of the 
way down, all of the pre-recorded images currently in the buffer will be deleted.
• The camera will not emit shutter sounds as it pre-records images.
5.Press the shutter button the rest of the way...

88Using BEST SHOT
The High Speed Movie capabilities of the camera provide you with a variety of BEST 
SHOT options to suite exactly the type of image you are trying to record.
1.In the REC mode, set the mode dial to b.
2.Press [SET].
3.Select the BEST SHOT scene you want to use and then press [SET].
• You also can change the frame rate, if you want (page 63).
4.Record the movie the same way as you would a normal movie (page 
59).
Press [0] to start and stop recording.
• To return to normal snapshot...

89Advanced Settings
Advanced Settings
The following are menu operations you can use to configure various camera settings.
.Example Menu Screen Operation
1.In the REC mode, press [MENU].
This will display the menu screen.
• Menu contents are different in the REC 
mode and PLAY mode.
2.Use [4] and [6] to select the tab where 
the item you want to configure is located.
3.Use [8] and [2] to select the menu item 
you want, and then press [6].
4.Use [8] and [2] to change the setting.
5.After the setting is the...

90Advanced Settings
.Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following 
operation is the same as the one described under “Example Menu Screen Operation” 
on page 89.
Procedure
[r] (REC)  *  [MENU]  *  REC Tab  *  Self-timer
Use [4] and [6] to select the “REC” tab.
Use [8] and [2] to select “Self-timer” and 
then press [6]. Press 
[MENU]. Press 
[r] (REC).
Downloaded From camera-usermanual.com Casio Manuals