Casio Exilim EX FH100 User Manual

101Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Digital Zoom
Select “On” when you want to use digital zoom (page 47).
• Digital zoom is disabled while shooting with the following feature.
– High speed movie recording
– “RAW+” image size
Procedure
[r] (REC) * [MENU] * REC Tab * L/R Key
You can assign one of the seven functions listed below to the [4] and [6] keys.
Turning Digital Zoom On or Off (Digital Zoom)
Assigning Functions to the [4] and [6] Keys (L/R Key)
Setting[4]/[6] key operation...

102Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without 
waiting for Auto Focus. This will record the image using a high speed focus operation 
that is much faster than Auto Focus.
NOTE
• At relatively high zoom factors, Quick Shutter will stop working and the camera will 
switch over to standard Auto Focus.
• The Quick Shutter setting is enabled for the second and subsequent images of a 
Normal...

103Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a image for about one second 
immediately after you press the shutter button to record it.
• Image review is available only when shooting single images. It does not work with 
continuous shutter.
Procedure
[r] (REC) * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for 
certain icons when you switch between REC functions....

104Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
This setting lets you specify which camera settings should be remembered by the 
camera when it is turned off, and restored the next time the camera is turned on. To 
have the camera remember a setting, you should enable the setting’s memory. Any 
setting whose memory is disabled will be reset to its initial default any time the 
camera is turned off.
*Optical zoom setting only.
Configuring Power On Default Settings (Memory)...

105Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot)
• The “Fine” setting helps to bring out details when shooting dense tree branches or 
leaves, a complex pattern, etc.
• Memory capacity (the number of images you can record) will be affected by the 
quality settings you configure (page 194).
Procedure
[r] (REC) * [MENU] * Quality Tab * » Quality (Movie)
This setting can be used to specify HD or STD as the image quality for movie 
recording when HD/STD is selected as...

106Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * HS » Speed
See page 62 for details.
Procedure
[r] (REC) * [MENU] * Quality Tab * MeteringThe metering mode determines what part of the subject is metered for exposure.
Procedure
[r] (REC) * [MENU] * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
when shooting images.
Setting the High Speed Movie Frame Rate (HS » Speed)
Specifying the Metering Mode (Metering)
 MultiMulti-pattern...

107Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify flash intensity to one of five levels from +2 (brightest flash) to –2 
(least bright flash).
• Flash intensity may not change when the subject is too far away or too close.
Procedure
[r] (REC) * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Procedure
[r] (REC) * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness settings from +2...

108Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 28 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [SET] to start playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/fast 
reverse[4] [6] (Playback in progress.)
• Each press of either button increases the speed of the 
fast forward or fast reverse...

109Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS 
group that includes all of the images for that particular CS session. You can use the 
following procedure to play back the images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] to display the CS group 
whose images you want to view.
2.About one second after you select a CS group, high speed playback of 
its images will start automatically.
• After playback of a CS...

110Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to 
start image playback.
NOTE
• Multiple images shot using normal-speed continuous shutter are stored individually 
and are not grouped. This means they can be displayed individually (page 28) but 
not as a CS group.
You can use the following procedures to delete images while playback is in progress 
or paused.
.Deleting a Specific CS Group File
1.While CS image playback is in progress or paused (toggle...