Casio Exilim EX FH100 User Manual
Here you can view all the pages of manual Casio Exilim EX FH100 User Manual. The Casio manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 71
71Using BEST SHOT You can save up to 999 camera setups as user BEST SHOT scenes for instant recall whenever you need them. 1.On the BEST SHOT scene menu, select the scene named BEST SHOT (Register User Scene). 2.Use [4] and [6] to select the snapshot whose setup you want to save. 3.Use [8] and [2] to select “Save”, and then press [SET]. Your BEST SHOT scene will be assigned the name “Recall User Scene”, along with a scene number. NOTE • You can create BEST SHOT setup for snapshots only. You cannot...
Page 72
72Using BEST SHOT With High Speed Night Scene and High Speed Night Scene and Portrait, the camera detects automatically whether it is being hand-held or on a tripod. If the camera detects it is being hand-held, pressing the shutter button will record a series of images and combine them in a way that minimizes image blur due to low light conditions. If the camera detects it is on a tripod, it will shoot a single image using a longer exposure time (instead of shooting and combining multiple images),...
Page 73
73Using BEST SHOT NOTE • When holding the camera by hand while shooting with these BEST SHOT scenes, make sure that the subjects remain as still as possible as the camera shoots the series of images. • Even when holding the camera by hand while shooting with “High Speed Night Scene and Portrait”, under certain conditions the camera may shoot only a single image instead of a series of images. • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • Movement while the...
Page 74
74Using BEST SHOT When you press the shutter button while High Speed Anti Shake is enabled, the camera records multiple images and automatically combines them in a way that produces a final image with minimal blur. You can shoot with this feature to minimize the effects of camera movement when shooting with optical anti shake does not produce the desired results. 1.In the REC mode, set the mode dial to b. 2.Press [SET]. 3.Select “High Speed Anti Shake” and then press [SET]. 4.When you are ready to...
Page 75
75Using BEST SHOT This BEST SHOT scene shoots a series of CS images using different exposure settings and combines them into a final image to correct for overexposure or underexposure of subjects of differing brightness. 1.In the REC mode, set the mode dial to b. 2.Press [SET]. 3.Select “High Speed Lighting” and then press [SET]. 4.Press the shutter button to shoot. • After you press the shutter button, the message “Busy... Please wait...” will appear on the monitor screen to indicate that recording...
Page 76
76Using BEST SHOT There always is some unavoidable time lag between the point you press the shutter button and the point that the image is actually recorded. The “Lag Correction” feature lets you configure the camera to lessen or even eliminate this lag to help you better time your shots and get exactly the moment you want. With “Lag Correction”, you half-press the shutter button and compose the image you want to shoot. Then when you full-press the shutter button, the camera pre-records a total of 5...
Page 77
77Using BEST SHOT 7.Use [4] and [6] to scroll through the pre-recorded images on the monitor screen. Use [4] and [6] to scroll through the pre-recorded images. Each image appears, along with an indication of the timing when it was pre-recorded. *Seconds prior to full-press of shutter button. • The timing of the image you select here will be the timing of the image displayed first in step 5 the next time you perform the above procedure. If you select the image that was pre-recorded 0.3 seconds prior...
Page 78
78Using BEST SHOT Multi-motion image can be used to isolate a moving subject within a series of multiple images and place them against a stationary background. Use a tripod or some other means to make sure that the camera is not moving or shaking when shooting with Multi-motion image. 1.In the REC mode, set the mode dial to b. 2.Press [SET]. 3.Select “Multi-motion Image” and then press [SET]. 4.Hold down the shutter button to record. 5.Release the shutter button. Continuous Shutter shooting will stop...
Page 79
79Using BEST SHOT NOTE • With this BEST SHOT scene, the flash setting automatically becomes ? (Flash Off). • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • The Self-timer cannot be used with this BEST SHOT scene. • Shooting with “Multi-motion Image” assumes that the subject is moving and changing positions. Trying to use it to shoot a subject that is moving while maintaining the same location (such as a golf swing, a baseball swing, etc.) will cause an error...
Page 80
80Using BEST SHOT With High Speed Best Selection, the camera automatically shoots a series of images, and selects the best one based on facial image blur, and facial expression (whether the subject is smiling or blinking). 1.In the REC mode, set the mode dial to b. 2.Press [SET]. 3.Select “High Speed Best Selection” and then press [SET]. 4.Press the shutter button to shoot. • This will cause the message “Busy... Please wait...” to appear. Do not move the camera while this message is displayed. The...