Casio Exilim Card EX S600 User Manual
Have a look at the manual Casio Exilim Card EX S600 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 338 Casio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GETTING READY 31 IMPORTANT! Be sure to keep the strap around your wrist when using the camera to protect against accidentally dropping it. The supplied strap is intended for use with this camera only. Do not use it for any other purpose. Never swing the camera around by the strap. Attaching the Strap Attach the strap to the strap ring as shown in the illustration. IMPORTANT! Pressing [] (DISP) will not change monitor screen contents during standby or recording of an audio snapshot. You can use [] (DISP) to turn off the monitor screen only when voice recording in the REC mode. You cannot turn off the monitor screen for any other recording function. Pressing [] (DISP) in the Voice Recording REC mode toggles the monitor screen on (“indicators on”) and off. While a Voice Recording file is displayed in the PLAY mode, pressing [] (DISP) toggles between “indicators on” and “indicators off”. When playing back the content of a Voice Recording file while “indicators off” is selected (Voice Recording file icon only on the monitor screen), the monitor screen will go black about two seconds after you press [SET] to start playback. The Voice Recording file icon (indicators off) will reappear after playback is complete. Strap ring Downloaded From camera-usermanual.com Casio Manuals
GETTING READY 32 2.With the EXILIM logo on the battery facing upwards (in the direction of the monitor screen), hold the stopper in the direction indicated by the arrow as you slide the battery into the camera. NP-20 Push the bottom of the battery, and make sure that the stopper securely locks the battery in place. Stopper Power Requirements Your camera is powered by a rechargeable lithium ion battery (NP-20). Loading the Rechargeable Battery 1.Slide the battery cover in the direction indicated by the arrow, and then swing it open. Downloaded From camera-usermanual.com Casio Manuals
GETTING READY 33 To charge the battery 1.Connect the bundled AC adaptor to the [DC IN 5.3V] connector of the USB cradle, and then plug it in to a household power outlet. Note the shape of the AC adaptor depends on the area where you purchased the camera. AC Adaptor [DC IN 5.3V]USB Cradle AC power cord 3.Swing the battery cover closed, and then slide it in the direction indicated by the arrow. IMPORTANT! Use only the special NP-20 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported. The battery is not fully charged when you use the camera for the first time after purchasing it. You need to charge the battery before using the camera for the first time. Downloaded From camera-usermanual.com Casio Manuals
GETTING READY 34 NOTE The AC adaptor is designed for operation on power ranging from 100V AC to 240V AC. Note, however, that the shape of the power cord plug varies according to country or geographic area. It is up to you to find out if the shape of the AC adaptor power cord plug is compatible with local power outlets when traveling abroad. Never use the AC adaptor with a voltage converter. 2.Turn off the camera. 3.With the camera positioned with the monitor screen facing forward as shown in the illustration, place it onto the USB cradle. Do not place the camera onto the USB cradle while it is turned on. The [CHARGE] lamp on the USB cradle should turn red, indicating that charging has started. When charging is complete, the [CHARGE] lamp will turn green. NOTE The bundled AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC. Note, however, that the shape of the AC power cord plug varies according to country or geographic area. If you plan to use the AC adaptor in a geographic area where the power receptacle shape is different from that in your area, replace the AC power cord with one of the other ones that comes with the camera, or purchase a commercially available AC power cord that is compatible with the power outlets in that area. Never use the AC adaptor with a voltage converter. aaaaaaaaaaaaaaaaaaaaaaaaaaa USB Cradle AC Adaptor [DC IN 5.3V] [CHARGE] lamp Downloaded From camera-usermanual.com Casio Manuals
GETTING READY 35 The [CHARGE] lamp may remain amber colored and the charge operation may not start right away if you try to charge immediately after using the camera (which causes battery to become warm) or when it is too hot or too cold where you are performing the charge operation. If this happens, simply wait until the battery reaches normal temperature. The [CHARGE] lamp will turn red and charging will start when the battery temperature returns to the allowable charging temperature range. If the [CHARGE] lamp starts flashing red, it means that an error occurs while charging. An error can be caused by any of the following: a problem with the USB cradle, a problem with the camera, or a problem with the battery or how it is loaded. Remove the camera from the USB cradle and see if it works normally. The only operations that can be performed while the camera is on the USB cradle are: battery charging, Photo Stand, image output to a TV, and USB data communication. It takes about 120 minutes to achieve a full charge. Actual charging time depends on current battery capacity and charging conditions. 4.After charging is complete, remove the camera from the USB cradle. IMPORTANT! Use only the USB cradle (CA-30) that comes with the camera or the optionally available charger (BC-10L) to charge the special NP-20 rechargeable lithium ion battery. Never use any other charging device. Use only the bundled AC adaptor. Never use any other type of AC adaptor. Do not use optionally available AD-C30, AD-C40, AD-C620, and AD-C630 AC adaptors with this camera. Make sure that the camera connector of the USB cradle is securely inserted into the camera’s connector as far as it will go. Downloaded From camera-usermanual.com Casio Manuals
GETTING READY 36 If the camera does not work normally This can mean there is a problem with how the battery is loaded. Perform the following steps. 1.Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth. 2.Check to make sure that the AC adaptor’s power cord is connected securely to the power outlet and USB cradle. • If the same symptoms occur again when you place the camera on the USB cradle after taking the above steps, contact a CASIO authorized service center. Low Battery Indicator The following shows how the battery capacity indicator on the monitor screen changes as battery power is used. The indicator means that remaining battery power is low. Note that you will not be able to record images while the battery indicator is . Charge the battery immediately whenever either of these indicators appears. Battery Level HighLow Indicator IMPORTANT! • See page 242 for information about battery life. • Due to differences in the power requirements of each mode, the battery indicator may show a lower level in the PLAY mode than what it shows in the REC mode. This is normal, and does not indicate malfunction. C Downloaded From camera-usermanual.com Casio Manuals
GETTING READY 37 To replace the battery 1.Open the battery cover. 2.Pull the stopper in the direction indicated by the arrow. This will cause the battery to come part way out of the slot. 3.Release the stopper and pull the battery from the camera. Take care so you do not drop the battery. 4.Load a new battery into the camera (page 32). Stopper Tips to Make the Battery Last Longer If you do not need the flash while recording, select (flash off) for the flash mode. See page 60 for more information. Enable the Auto Power Off and the Sleep features (page 43) to protect against wasting battery power when you forget to turn off the camera. Use the “Normal” monitor brightness setting to consume less power (page 165). Downloaded From camera-usermanual.com Casio Manuals
GETTING READY 38 Failure to observe any of the following precautions while using the battery creates the risk of overheating, fire, and explosion. —Never use any other type of charger except the optional charger specified for the battery. —Never try to use the battery to power any device other than this camera. —Never use or leave the battery near open flame. —Never place the battery in a microwave oven, throw it into fire, or otherwise expose it to intense heat. —Make sure the battery is oriented correctly when you load it into the camera or attach it to the optional charger. —Never carry or store the battery together with items that can conduct electricity (necklaces, pencil lead, etc.) —Never try to take the battery apart, modify it in any way, or expose it to strong impact. —Do not immerse the battery in fresh water or salt water. —Do not use or leave the battery under direct sunlight, in an automobile parked in the sun, or in any other area subject to high temperatures.Power Supply Precautions Note the following precautions when handling or using the battery and the optional charger. Battery Handling Precautions SAFETY PRECAUTIONS Be sure to read the following Safety Precautions before using the battery for the first time. NOTE The term “battery” in this manual refers to the CASIO NP-20 Rechargeable Lithium Ion Battery. Use only the USB cradle (CA-30) that comes with the camera or the optionally available charger (BC-10L) to charge the special NP-20 rechargeable lithium ion battery. Never use any other charging device. Downloaded From camera-usermanual.com Casio Manuals
GETTING READY 39 PRECAUTIONS DURING USE The battery is designed for use with this CASIO digital camera only. Use only the USB cradle that comes with the camera or the specified optional charger to charge the battery. Never use any other type of charger for charging. Use of a battery in cold environments shortens the operating time you can expect on a full charge. Charge the battery in a location where the temperature is in the range of 10°C to 35°C (50°F to 95°F). Charging outside this temperature range can cause charging to take longer than normal or even cause charging to fail. Very limited operation following a full charge indicates that the battery has reached the end of its service life. Replace the battery with a new one. Never wipe the battery with thinner, benzene, alcohol, or other volatile agents or chemically treated rags. Doing so can cause deformation of the battery and lead to malfunction. Should you ever notice any of the following conditions while using, charging, or storing a battery, immediately remove it from the camera or charger, and keep it away from open flame: —Fluid leaking —Emission of a strange odor —Heat emission —Battery discoloration —Battery deformation —Any other battery abnormality If the battery does not achieve full charge after the normal charging time has passed, stop charging. Continued charging creates the risk of overheating, fire, and explosion. Battery fluid can damage your eyes. Should battery fluid get into your eyes accidentally, immediately rinse them with clean tap water and then consult a physician. Be sure to read page 33 of this User’s Guide and the instructions that come with the optional charger before using or charging the battery. If the battery is to be used by young children, make sure that a responsible adult makes them aware of the precautions and proper handling instructions and make sure that they handle the battery correctly. Should fluid from the battery accidentally get onto clothing or your skin, immediately rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin irritation. Downloaded From camera-usermanual.com Casio Manuals
GETTING READY 40 USB Cradle and AC Adaptor Precautions Never use an electrical outlet whose voltage is outside the rating marked on the AC adaptor. Doing so can create the risk of fire or electric shock. Use only the AC adaptor bundled with this camera. Do not allow the AC adaptor cord to become cut or damaged, do not place heavy objects on it, and keep it away from heat. A damaged power cord creates the risk of fire and electric shock. Never try to modify the AC adaptor cord, or subject it to severe bending, twisting, or pulling. Doing so creates the risk of fire and electric shock. Never touch the AC adaptor while your hands are wet. Doing so creates the risk of electric shock. Do not overload extension cords or wall outlets. Doing so creates the risk of fire and electric shock. Should the cord of the AC adaptor become damaged (exposed internal wiring), contact your dealer or nearest CASIO authorized service center. A damaged AC adaptor cord creates the risk of fire or electric shock. Caution! BATTERY STORAGE PRECAUTIONS Make sure you remove the battery from the camera when you do not plan to use it for a long time. A battery left in the camera discharges very small amounts of power even when power is turned off, which can lead to a dead battery or the need for longer charging before the next use. Store the battery in a cool, dry place (20°C (68 °F) or lower). USING THE BATTERY See page 33 of this manual or the instructions that come with the optional charger for information about charging procedures and charging times. When transporting a battery, keep it either loaded in the camera or stored in its case. Downloaded From camera-usermanual.com Casio Manuals