Casio Exilim Card EX S600 User Manual

							PLAYBACK
141
Rotating the Display Image
Use the following procedure to rotate the image 90 degrees
and register the rotation information along with the image.
After you do this, the image is always displayed in its
rotated orientation.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Rotation”, and
then press [
].
• Note that this operation is possible only when a
snapshot image is on the monitor screen.
3.Use [] and [
] to scroll through images until
the one you want to rotate is on the monitor
screen.
4.Use [] and [] to
select “Rotate”, and
then press [SET].
• Each press of [SET]
rotates the image 90
degrees.
• Pressing [MENU] displays a screen for configuring
slideshow settings. To restart the slideshow, press
[MENU] while the menu screen is displayed, or
select “Start” and then press [SET].
• During audio playback, you can adjust volume by
pressing [] and then using [] and [].
4.To stop the Phot Stand slideshow, press
[PHOTO] again.
 IMPORTANT! 
• The battery is not charged while a Photo Stand
slideshow is in progress. To charge the battery, stop
the slideshow.
C
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
142
Using Image Roulette
Image Roulette cycles images like a slot machine on the
display, before stopping at one of them. The image that
finally appears is random.
1.While the camera is turned off, hold down []
as you press [
] (PLAY) to turn it on.
•Keep [] held down until images appear on the
monitor screen.
•This starts the Image Roulette operation, scrolling
images on the display, finally stopping at one.
2.Press [] or [] to restart the Image Roulette
operation.
3.To turn off Image Roulette, press [] (REC)
to enter the currently selected recording
mode or press the power button to turn off
the camera.
5.After you are finished configuring settings,
press [MENU] to exit the setting screen.
 IMPORTANT! 
•You cannot rotate an image that is protected. To
rotate such an image, first unprotect it (page 152).
•You may not be able to rotate a digital image that
was recorded with another type of digital camera.
•You cannot rotate the following types of images.
—Movie images and the voice recording file icon
—Zoomed images
—Images created with MOTION PRINT
•Image rotation is supported for single image only.
You cannot rotate a 9-image screen or an image on
the calendar screen.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
143
 IMPORTANT! 
•Image Roulette does not play movie files or display
the voice recording file icon.
•Image Roulette is disabled when there is only one
snapshot image available.
•If an image you have rotated appears during Image
Roulette, the unrotated version is displayed (page
141).
•Note that Image Roulette works only with images
recorded with this camera. Image Roulette may not
operate properly when other types of images are in
memory.
•If you do not start another Image Roulette operation
for about one minute after the final image appears,
the camera will automatically cancel Image Roulette
and enter the normal PLAY mode.
•You can use Image Roulette while “Power On” or
“Power On/Off” is selected for the “REC/PLAY”
setting (page 166).Adding Audio to a Snapshot
The “after-recording” feature lets you add audio to
snapshots after they are recorded. You can also re-record
the audio of an audio snapshot (one with a 
 icon on it).
•Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
•Recording Time:
Up to about 30 seconds per image
•Audio File Size:
Approximately 165KB (30-second recording of
approximately 5.5KB per second)
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
144
1.In the PLAY mode, use [] and [] to scroll
through snapshots until the one to which you
want to add audio is displayed.
2.Press [MENU].
3.Select the “PLAY”
tab, select “Dubbing”,
and then press [].
4.Press the shutter button to start audio
recording.
5.Recording stops after about 30 seconds or
when you press the shutter button.
To re-record audio
1.In the PLAY mode, use [] and [] to scroll
through snapshots until the one whose audio
you want to re-record is displayed.
2.Press [MENU].
3.Select the “PLAY” tab, select “Dubbing”, and
then press [].
4.Use [
] and [] to select “Delete”, and then
press [SET].
•If you merely want to delete the audio without re-
recording, press [MENU] here to complete the
procedure.
5.Press the shutter button to start audio
recording.
6.Recording stops after about 30 seconds or
when you press the shutter button.
•This deletes the existing audio and replaces it with
the new one.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
145
 IMPORTANT! 
•Take care that you do
not block the
microphone with your
fingers.
•Good recording results
are not possible when
the camera is too far
from the subject.
•The 
 (Audio) icon appears on the monitor screen
after audio recording is complete.
•You will not be able to record audio when remaining
memory capacity is low.
•You cannot add audio to the following types of
images.
—Movie images
—Images created with MOTION PRINT
—Protected snapshot (page 152)
•Audio that is re-recorded or deleted cannot be
recovered. Make sure you no longer need audio
before re-recording or deleting it.
Microphone
Playing Back a Voice Recording File
Perform the following steps to play back a voice recording
file.
1.In the PLAY mode, use [] and [] to display
the voice recording file (a file with 
 on it)
you want to play.
2.Press [SET].
•This starts playback of
the voice recording file
through the camera’s
speaker.
•You can perform the
following operations
while audio is playing.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
146
 IMPORTANT! 
• Audio volume can be adjusted only when playback is
being performed or is paused.
• If your recording has index marks (page 108) inside
it, you can jump to the index mark before or after the
current playback location by pausing playback and
then pressing [
] or []. Next, press [SET] to
resume playback from the index mark position.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Toggle monitor screenindicators on and off
Cancel playback
Do this:
Hold down [
] or [].
Press [SET].
Press [] and then use []and [].
Press [] (DISP).
Press [MENU].
Displaying Camera Images on a TV Screen
You can display recorded images on a TV screen. To
display camera images on a TV, you need a television
equipped with a video input terminal, USB cradle, and the
AV cable that comes with the camera.
1.Connect one end of the AV cable that comes
with the camera to the [AV OUT] port of the
USB cradle, and the other end to the video
input terminal of the TV.
• Connect the yellow plug of the AV cable to the video
input (yellow) terminal of the TV, and the white plug
to the TV’s audio input (white) terminal.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
147
AV cable
[AV OUT] (AV output port)
Video input terminal
TV
2.Turn off the camera.
3.Set the camera onto the USB cradle.
4.Turn on the TV and select its video input
mode.
5.Press [] to turn on the camera, and then
perform the required operation for playback.
 IMPORTANT! 
•Make sure that “Power On” or “Power On/Off” is
selected for the camera’s power on/off functions
(page 166) when you connect to a TV to view
images.
•All icons and indicators that appear on the monitor
screen also appear on the TV screen.
•Note that the audio output is monaural.
•The camera’s monitor screen will go blank during
video output.
•Pressing the USB cradle’s [PHOTO] button will
activate the Photo Stand feature (page 140) and
display images on the TV screen.
•Depending on the size of the TV screen, recorded
images may not fill the entire screen.
•For video output, the audio volume level is initially
set to maximum. Perform volume level adjustment
using TV controls.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
148
Selecting the Video Output System
You can select either NTSC or PAL for the video system to
match the system of the TV you are using.
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “Video Out”,
and then press [].
3.Use [
] and [] to select the setting you
want, and then press [SET].
If you are using a TV designedfor use in this area:
U.S., Japan, and other areas
that use the NTSC system
Europe and other areas that
use the PAL systemSelect this setting:NTSC
PAL
 IMPORTANT! 
•Images will not display properly if you select the
wrong video system.
•This camera supports the NTSC and PAL video
systems only. Images will not display properly if you
use a TV (monitor) that is designed for a different
video system.
Downloaded From camera-usermanual.com Casio Manuals 
						

							DELETING FILES
149
DELETING FILES
You can delete a single file, or you can delete all files
currently in memory.
 IMPORTANT! 
•Note that file deletion cannot be undone. Once you
delete a file, it is gone. Make sure you really do not
need a file anymore before you delete it. Especially
when deleting all files, make sure you check all the
files you have stored before proceeding.
•A protected file cannot be deleted. To delete a
protected file, unprotect it first (page 152).
•Delete cannot be performed when all files in memory
are protected (page 153).
•Deleting an audio snapshot deletes both the image
file and the audio file attached to it.
•You cannot use the procedures in this section to
delete images from the FAVORITE folder. See the
procedures on page 156 for details about deleting
FAVORITE folder contents.
Deleting a Single File
1.In the PLAY mode,
press [] (
 ).
2.Use [] and [] to scroll through files and
display the one you want to delete.
3.Use [
] and [] to select “Delete”.
•To exit the file delete operation without deleting
anything, select “Cancel”.
4.Press [SET] to delete the file.
•Repeat steps 2 through 4 to delete other files, if you
want.
5.Press [MENU] to exit the menu screen.
Downloaded From camera-usermanual.com Casio Manuals 
						

							DELETING FILES
150
Deleting All Files
1.In the PLAY mode, press [] ( ).
2.Use [
] and [] to select “All Files Delete”,
and then press [SET].
3.Use [
] and [] to select “Yes”.
•To exit the file delete operation without deleting
anything, select “No”.
4.Press [SET] to delete all the files.
•The message “There are no files.” appears on the
screen after all of the files are deleted.
Downloaded From camera-usermanual.com Casio Manuals