Casio Exilim Card EX S600 User Manual
Have a look at the manual Casio Exilim Card EX S600 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 338 Casio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
OTHER RECORDING FUNCTIONS 121 Resetting the Camera Use the following procedure to reset all of the camera’s settings to their initial defaults as shown under “Menu Reference” on page 225. 1.Press [MENU]. 2.Select the “Set Up” tab, select “Reset”, and then press []. 3.Use [] and [] to select “Reset”, and then press [SET]. • To cancel the procedure without resetting, select “Cancel” and press [SET]. Specifying Contrast Use this procedure to adjust the relative difference between the light areas and dark areas of the image you are recording. 1.In the REC mode, press [MENU]. 2.Select the “Quality” tab, select “Contrast”, and then press []. 3.Use [] and [] to select the setting you want, and then press [SET]. To get this: High contrast Normal contrast Low contrast Select this setting: +2 +1 0 –1 –2 Downloaded From camera-usermanual.com Casio Manuals
PLAYBACK 122 PLAYBACK 2.Use [] (forward) or [] (back) to scroll through files on the monitor screen. NOTE •Holding down [] or [] scrolls images at high speed. •In order to allow for faster playback image scrolling, the image that initially appears on the monitor screen is a preview image, which is of somewhat lower quality than the actual display image. The actual display image appears a short while after the preview image. This does not apply to images copied from another digital camera. You can use the camera’s built-in monitor screen to view images after you record them. Basic Playback Operation Use the following procedure to scroll through files stored in the camera’s memory. 1.Press [] (PLAY) to turn on the camera. •This enters the PLAY mode and causes an image or a message to appear on the monitor screen. PLAY mode file type Folder name/ File name Image quality Image size Date and time [] Downloaded From camera-usermanual.com Casio Manuals
PLAYBACK 123 Playing an Audio Snapshot Perform the steps below to display an audio snapshot (indicated by ) and play its audio. 1.In the PLAY mode, use [] and [] until the image you want is displayed. 2.Press [SET]. •This plays back the audio that accompanies the displayed image. •You can perform the following operations while audio is playing. IMPORTANT! •Audio volume can be adjusted only when playback is being performed or is paused. To do this: Fast forward or fast reverse the audio Pause and unpause audio playback Adjust audio volume Changing display contents Cancel playback Do this: Hold down [] or []. Press [SET]. Press [] and then use []and []. Press [] (DISP). Press [MENU]. Downloaded From camera-usermanual.com Casio Manuals
PLAYBACK 124 Zooming the Display Image Perform the following procedure to zoom the image currently on the monitor screen up to eight times its normal size. 1.In the PLAY mode, use [] and [] to display the image you want. 2.Press the zoom button ( ) to enlarge the image. •This zooms the image. •An indicator appears in the lower right corner, that shows what part of the original image is currently displayed on the monitor screen. •You can toggle display of the zoom factor on and off by pressing [BS]. 3.Use [], [], [], and [] to shift the image up, down, left, or right. 4.Press [MENU] to return the image to its original size. IMPORTANT! •Depending on the original size of the recorded image, you may not be able to zoom a display image the full eight times normal size. Current zoom factor Displayed part Original image Downloaded From camera-usermanual.com Casio Manuals
PLAYBACK 125 Resizing an Image You can resize a recorded image to one of three sizes. 1.In the PLAY mode, press [MENU]. 2.Select the “PLAY” tab, select “Resize”, and then press []. •Note that this operation is possible only when a snapshot image is on the monitor screen. 3.Use [] and [] to scroll through images and display the one you want to resize. Print Size A4 Print 3.5˝ × 5˝ Print E-mail (optimum size when attaching image to e-mail)Larger Smaller 2048 × 1536 1600 × 1200 640 × 480 3M* 2M VGA Image Size *“M” stands for “Mega.” •To cancel the resize operation, select “Cancel”. 4.Use [] and [] to select the setting you want, and then press [SET]. •When selecting the image size, the image size value (pixels) will alternate on the display with a corresponding print size. The print size indicates the optimum paper size when you print an image that is the image size you select. Downloaded From camera-usermanual.com Casio Manuals
PLAYBACK 126 IMPORTANT! •Resizing an image creates a new file that contains the image in the size you select. The file with the original image also remains in memory. •Note that you cannot resize the following types of images. —640 × 480 pixel and smaller images —Movie images and the voice recording file icon —Images created with MOTION PRINT —Images recorded with another camera •The resize operation cannot be performed when there is not enough memory to store the resized image. •When you display a resized image on the camera’s monitor screen, the date and time that appear when the image is displayed indicate when the image was originally recorded, not when the image was resized. •When a resized image is displayed on the calendar screen (page 137), it will appear on the date it was resized.Cropping an Image You can use the following procedure to crop a portion of an enlarged image. 1.In the PLAY mode, use [] and [] to scroll through images and display the one you want to crop. 2.Press [MENU]. 3.Select the “PLAY” tab, select “Trimming”, and then press []. •An indicator appears in the lower right corner, that shows what part of the original image is currently displayed on the monitor screen. Original image Current zoom factor Displayed part Downloaded From camera-usermanual.com Casio Manuals
PLAYBACK 127 4.Use the zoom button to zoom the image. •The part of the image displayed on the monitor screen is the cropped part. 5.Use [], [], [], and [] to to scroll the part to be cropped up, down, left, and right. 6.Press [SET] to extract the part of the image enclosed in the cropping boundary. •If you want to cancel the procedure at any point, press [MENU]. IMPORTANT! •Trimming an image causes the original (pre-trimmed) image and the new (trimmed) version to be stored as separate files. •Note that you cannot crop the following types of images. —Movie images and the voice recording file icon —Images created with MOTION PRINT —Images recorded with another camera •The cropping operation cannot be performed when there is not enough memory to store the cropped image. •When you display a cropped image on the camera’s monitor screen, the date and time that appear when the image is displayed indicate when the image was originally recorded, not when the image was cropped. •When a cropped image is displayed on the calendar screen (page 137), it will appear on the date it was cropped. Downloaded From camera-usermanual.com Casio Manuals
PLAYBACK 128 Playing and Editing a Movie Playing a Movie Use the following procedure to play a movie you recorded with this camera. 1.In the PLAY mode, use [] and [] to scroll through movies on the monitor screen and display the one you want. 2.Press [SET]. •This starts playback of the movie. •You can perform the following operations while a movie is playing. Movie icon Elapsed recording time Image quality To do this: Fast forward or fast reverse playback •Each press increases the speed one more step. Return fast forward or fast reverse movie playback to normal speed Pause movie playback Scroll paused playback one frame Stop movie playback Adjust the movie audio volume level Toggle monitor screen indicators on and off Zoom the movie image Scroll a zoomed movie image on the monitor screen Do this: Press [] or []. Press [SET]. Press [SET]. Press [] or []. Press [MENU]. Press [] and then use [] and []. Press [] (DISP). Press the zoom button(). Use [], [], [], []. Downloaded From camera-usermanual.com Casio Manuals
PLAYBACK 129 IMPORTANT! •You can adjust the volume level of movie audio during movie playback only. •You can zoom a movie up to 4.5 times normal size. •The camera’s playback function may not be able to play back movies recorded with another camera, movies transferred from your computer, etc.Playing Back a Movie with Anti Shake Use the following procedure when you want to play back a movie with Anti Shake. Anti Shake is particularly useful when you have the camera connected to a TV for viewing, since the effects of camera movement are more evident on a big screen. 1.In the PLAY mode, use [] and [] to display the movie you want to play with Anti Shake. 2.Press [] (MOVIE) to turn on Anti Shake. •Each press of [] (MOVIE) toggles Anti Shake on and off. • (Anti Shake indicator) is displayed on the monitor screen while Anti Shake is turned on. 3.After the setting is the way you want, press [SET]. Downloaded From camera-usermanual.com Casio Manuals
PLAYBACK 130 Editing a Movie Use the procedure in this section to edit and delete movies. Editing operations let you cut everything before or after a specific frame, or to cut everything between two frames. IMPORTANT! •Cut operations cannot be undone. Make sure you really want to cut the part of the movie you are specifying before executing the cut operation. •Movie editing is not possible for movies not recorded with this camera. •A movie that is shorter than five seconds cannot be edited. •The cut operation can take considerable time if the movie is long. •You will not be able to perform the cut operation if the amount of memory available is less than the size of the movie file you are cutting. If this happens, delete any files you no longer need to free up more memory. NOTE •You can press [] (MOVIE) to turn Anti Shake on and off while the movie is stopped or playing. •You can also use the following procedure to turn Anti Shake on and off. 1. While a movie is playing, press [MENU]. 2. Select the “PLAY” tab, select “ Anti Shake”, and then press []. 3. Use [] and [] to select “On”, and then press [SET]. •When Anti Shake is turned on, the area of the monitor screen used for playback is slightly smaller than normal. Downloaded From camera-usermanual.com Casio Manuals