Casio EX S200 User Manual

							71Advanced Settings
.To change Auto Shutter trigger sensitivity (Sensitivity)
1.Use [8] and [2] to select “Sensitivity” and then press [6].
2.Use [4] and [6] to select the sensitivity setting you want, and then 
press [SET].
• You can select any one of three sensitivity levels, from /.. (Lowest) to 
/// (Highest).
• With the /// (Highest) setting, the auto shutter release is triggered relatively 
easily. Auto shutter release triggering becomes more difficult with the /.. 
(Lowest) setting, but recorded images have the least blur. Experiment with 
Auto Shutter trigger sensitivity settings to find the one that work best for you.
Tips for Better Auto Shutter Snapshots
• Using Auto Shutter in combination with Anti Shake (page 65) reduces the chance 
of image blur even more.
• While recording with Detect Blur or Detect Smile, keep the camera as still as 
possible until the recording operation is complete. 
						

							72Advanced Settings
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you 
can record an image by pressing the shutter button all the way down again.
• Detect Blur and Detect Panning may not produce the desired effect when shooting 
in an area where dim lighting requires a slow shutter speed, or when the subject is 
moving extremely quickly.
• Since facial expressions differ from individual to individual, you may experience 
problems with getting the camera to release the shutter while Detect Smile is being 
used. If this happens, change the trigger sensitivity setting.
• The Auto Power Off (page 141) trigger time is fixed at five minutes while the 
camera is in Auto Shutter standby. Sleep (page 140) is disabled while Auto Shutter 
being used.
• To cancel Auto Shutter recording while Auto Shutter is being performed (indicated 
by “0 Auto” flashing on the monitor screen), press [SET].
• The “Ë Tracking” setting for the AF area cannot be used while Detect Blur or 
Detect Panning is selected for the Auto Shutter setting (page 43).
• Always make sure you had “Û Spot” selected for the AF area whenever you are 
using the Detect Smile Auto Shutter setting (page 43).
• Auto Shutter cannot be used in combination with any of the following features.
– Premium Auto
– Some BEST SHOT scenes
• The following function is disabled when shooting with Auto Shutter.
– Triple Self-timer 
						

							73Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Memory
When you turn off the camera, it remembers the current settings of all enabled 
memory items and restores them when you turn it back on. Any memory item that is 
disabled will be returned to its initial default setting whenever you turn off the camera.
*Optical zoom setting only.
• If you turn the camera power off and then back on while the BEST SHOT memory 
item is enabled, all of the other memory items (except for zoom position) are 
initialized to the currently selected BEST SHOT sample scene setup, regardless of 
the enabled/disabled status of the other memory items.
Configuring Power On Default Settings (Memory)
SettingDisabled (Initial Default Setting)Enabled
b BEST SHOT Snapshot (Auto)
Setting at power 
off Effect Off
Auto Shutter Off
Flash Auto
Focus AF (Auto Focus)
White Balance Auto
ISO Auto
AF Area Spot
CS Off
Self-timer Off
Single SR Quality Off
Single SR Zoom On
MF PositionPosition before manual focus was 
selected.
Zoom Position
*Full wide 
						

							74Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Single SR Quality
Super resolution technology is used to analyze the image, and then interpolation is 
performed to increase overall image resolution.
• Single SR Quality is effective when you want to capture delicate textures.
•A ç icon is displayed when the “Single SR Quality” setting is “On”.
• Single SR Quality is enabled for the entire zoom range, including digital zoom.
• It does not work during movie recording.
• The following functions are disabled when shooting with Single SR Quality.
Continuous Shutter, Triple Self-timer, Make-up Mode, some BEST SHOT scenes
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Single SR Zoom
See page 49 for details.
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * T Quality (Snapshot)
• The “Fine” setting helps to bring out details when shooting a finely detailed image 
of nature that includes dense tree branches or leaves, or an image of a complex 
pattern.
• Memory capacity (the number of images you can record) will be affected by the 
quality settings you configure (page 167).
Image Quality Settings (Quality)
Enabling Super Resolution Quality for Snapshots 
(Single SR Quality)
Zooming with Minimal Loss of Snapshot Resolution 
(Single SR Zoom)
Specifying Snapshot Image Quality (Quality (Snapshot))
FineGives image quality priority.
NormalNormal
C 
						

							75Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Effect
When either mode described below is selected, the camera will automatically touch 
up people and scenery to help ensure beautiful images every time.
.Shooting with the Make-up Mode (Make-up)
1.Enter the Make-up Mode
• Entering the Make-up Mode causes the ± to 
appear on the Control Panel.
2.Press [SET].
3.Use [4] and [6] to select “Make-up Level” (third 
Control Panel icon from the bottom), and then press 
[SET].
• You can set one of 13 levels in the range of “0 (Off)” (no correction) to “+12 
(Max.)” (maximum correction). The larger the value, the greater the processing 
that is performed.
4.Point the camera at the subject(s).
The camera will detect human faces and display a frame around each one.
5.Half-press the shutter button.
The camera will focus on the face, which will cause frames around it to turn 
green.
6.When you are ready to shoot, press the shutter button all the way 
down.
Recording Beautiful Images of People and Scenery (Effect)
Make-up This mode smoothes the skin texture of the subject and 
softens facial shadows caused by harsh sunlight for better 
looking portraits.
Landscape This mode makes colors more vivid, filters haze, and performs 
other processing that enhances the beauty of natural scenery.
Make-up icon 
						

							76Advanced Settings
.Shooting Beautiful Scenery Images (Landscape)
1.Enter the Landscape Mode
• Entering the Landscape Mode causes the Ö to 
appear on the Control Panel.
2.Press [SET].
3.Use [4] and [6] to select the Landscape Mode 
setting (third Control Panel icon from the bottom), 
and then press [SET].
• Available level settings are “+1” (Weak) and “+2” (Strong).
4.Point the camera at the scenery you want to record.
5.Press the shutter button to shoot.
NOTE
• The Make-up Mode cannot be used during movie recording.
• The following functions cannot be used together with the Make-up Mode:
Continuous Shutter, Triple Self-timer, Face Detection, Landscape Mode, Some 
BEST SHOT scenes
• The following functions are disabled while the camera is in the Landscape Mode: 
Continuous Shutter, Triple Self-timer, Make-up Mode, Face Detection, Lighting, 
Color Filter, Some BEST SHOT scenes
• Switching from “Auto” to “Premium Auto” (page 25) causes the Make-up and/or 
Landscape Mode features to be applied automatically. Because of this, you cannot 
enter the Make-up Mode or Landscape Mode while you are using Premium Auto.
Vivid 
LandscapeEnhances colors to produce a clearer, more vivid landscape 
image.
Mist RemovalCorrects for misty and cloudy conditions for scenery images 
that appear as if they were shot on a clear day.
Landscape icon
C 
						

							77Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * EV Shift
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1.Use [8] and [2] to adjust the exposure compensation value.
To cancel exposure compensation, change the EV value to 0.0.
2.Press [SET].
This applies the exposure compensation value. The exposure compensation 
value you set remains in effect until you change it or turn off the camera (which 
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to 
obtain satisfactory results even after performing exposure compensation.
Correcting Image Brightness (EV Shift)
[8] : Increases the EV value. A higher EV 
value is best for light-colored subjects 
and backlit subjects.
[2] : Decreases the EV value. A lower EV 
value is best for dark-color subjects and 
for shooting outdoors on a clear day. 
						

							78Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * White Balance
You can adjust white balance to match the source of light available where you are 
shooting and avoid the blue cast that results when shooting outdoors when it is 
cloudy, and the green cast that results when shooting under fluorescent lighting.
• When “Auto” is selected for the white balance setting, the camera automatically 
determines the white point of the subject. Certain subject colors and light source 
conditions can cause problems when the camera tries to determine the white point, 
which makes proper white balance adjustment impossible. If this happens, select 
the white balance setting that matches your shooting conditions (Daylight, 
Overcast, etc.).
Controlling White Balance (White Balance)
AutoConfigures the camera to adjust white balance automatically.
 (Daylight)For shooting outdoors on a clear day
 (Overcast)For shooting outdoors on an overcast rainy day, in the shade, etc.
 (Shade)For shooting on a clear day in the shade of trees or buildings
 (Day White 
Fluorescent)For shooting under white or day white fluorescent lighting
 (Daylight 
Fluorescent)For shooting under daylight fluorescent lighting
 (Tungsten)For shooting under light bulb lighting
ManualFor configuring the camera manually to suit a particular light 
source
1Select “Manual”.
2Under the lighting conditions you plan to 
use when shooting, point the camera at a 
blank white piece of paper so it fills the 
entire monitor screen and then press the 
shutter button.
3Press [SET].
The white balance setting is retained even if you turn off the 
camera.
¤
'
“
†
–
«
Blank white paper 
						

							79Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * ISO
ISO sensitivity is a measure of sensitivity to light.
• “Auto” ISO sensitivity always is applied for movies, regardless of the current ISO 
sensitivity setting.
• Higher ISO sensitivity values tend to result in digital noise in images.
Specifying ISO Sensitivity (ISO)
AutoAdjusts sensitivity automatically according to conditions.
ISO 50Lower sensitivity
Higher sensitivitySlow shutter speed
Fast shutter speed (Set 
for shooting in dimly lit 
areas.)Less noise
Some coarseness 
(increased digital noise)
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200 
						

							80Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
when shooting images.
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Optimizing Image Brightness (Lighting)
ExtraPerforms a higher level of brightness correction than the “On” setting. 
When this option is selected, it takes longer for the image to be 
stored after the shutter button is pressed.
OnPerforms brightness correction.
OffDoes not perform brightness correction.
Using Built-in Color Filters (Color Filter)