Casio EX S200 User Manual

71Advanced Settings
.To change Auto Shutter trigger sensitivity (Sensitivity)
1.Use [8] and [2] to select “Sensitivity” and then press [6].
2.Use [4] and [6] to select the sensitivity setting you want, and then 
press [SET].
• You can select any one of three sensitivity levels, from /.. (Lowest) to 
/// (Highest).
• With the /// (Highest) setting, the auto shutter release is triggered relatively 
easily. Auto shutter release triggering becomes more difficult with the /.. 
(Lowest) setting, but recorded...

72Advanced Settings
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you 
can record an image by pressing the shutter button all the way down again.
• Detect Blur and Detect Panning may not produce the desired effect when shooting 
in an area where dim lighting requires a slow shutter speed, or when the subject is 
moving extremely quickly.
• Since facial expressions differ from individual to individual, you may experience 
problems with getting the camera to...

73Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Memory
When you turn off the camera, it remembers the current settings of all enabled 
memory items and restores them when you turn it back on. Any memory item that is 
disabled will be returned to its initial default setting whenever you turn off the camera.
*Optical zoom setting only.
• If you turn the camera power off and then back on while the BEST SHOT memory 
item is enabled, all of the other memory items (except for zoom position)...

74Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Single SR Quality
Super resolution technology is used to analyze the image, and then interpolation is 
performed to increase overall image resolution.
• Single SR Quality is effective when you want to capture delicate textures.
•A ç icon is displayed when the “Single SR Quality” setting is “On”.
• Single SR Quality is enabled for the entire zoom range, including digital zoom.
• It does not work during movie recording.
• The following...

75Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Effect
When either mode described below is selected, the camera will automatically touch 
up people and scenery to help ensure beautiful images every time.
.Shooting with the Make-up Mode (Make-up)
1.Enter the Make-up Mode
• Entering the Make-up Mode causes the ± to 
appear on the Control Panel.
2.Press [SET].
3.Use [4] and [6] to select “Make-up Level” (third 
Control Panel icon from the bottom), and then press 
[SET].
• You can set...

76Advanced Settings
.Shooting Beautiful Scenery Images (Landscape)
1.Enter the Landscape Mode
• Entering the Landscape Mode causes the Ö to 
appear on the Control Panel.
2.Press [SET].
3.Use [4] and [6] to select the Landscape Mode 
setting (third Control Panel icon from the bottom), 
and then press [SET].
• Available level settings are “+1” (Weak) and “+2” (Strong).
4.Point the camera at the scenery you want to record.
5.Press the shutter button to shoot.
NOTE
• The Make-up Mode cannot be used during...

77Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * EV Shift
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1.Use [8] and [2] to adjust the exposure compensation value.
To cancel exposure compensation, change the EV value to 0.0.
2.Press [SET].
This applies the exposure compensation value. The exposure compensation 
value you set remains in effect until you change it or turn off the...

78Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * White Balance
You can adjust white balance to match the source of light available where you are 
shooting and avoid the blue cast that results when shooting outdoors when it is 
cloudy, and the green cast that results when shooting under fluorescent lighting.
• When “Auto” is selected for the white balance setting, the camera automatically 
determines the white point of the subject. Certain subject colors and light source 
conditions...

79Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * ISO
ISO sensitivity is a measure of sensitivity to light.
• “Auto” ISO sensitivity always is applied for movies, regardless of the current ISO 
sensitivity setting.
• Higher ISO sensitivity values tend to result in digital noise in images.
Specifying ISO Sensitivity (ISO)
AutoAdjusts sensitivity automatically according to conditions.
ISO 50Lower sensitivity
Higher sensitivitySlow shutter speed
Fast shutter speed (Set 
for shooting in...

80Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
when shooting images.
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Optimizing Image Brightness (Lighting)
ExtraPerforms a higher level of brightness correction than the “On” setting. 
When this option is selected, it takes longer for the image to be...