Casio EX S200 User Manual

121Using the Camera with a Computer
.To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube 
website (http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including neighboring copyrights) 
unless you yourself own the copyright or you have obtained the permission of the 
applicable copyright holder(s).
• A single movie shoot with the “For YouTube” scene can have a maximum file size 
of 2048MB or a...

122Using the Camera with a Computer
If you want to transfer images from your computer to the camera, install Photo 
Transport on your computer from the CD-ROM that comes with the camera.
.To install Photo Transport
1.On the CD-ROM menu screen, select “Photo Transport”.
2.After reading the information about installation conditions and system 
requirements for installation in the “Read me” file, install Photo 
Transport.
.To transfer images to the camera
1.Connect the camera to your computer (page 116)....

123Using the Camera with a Computer
.To transfer computer screen captures to the camera
1.Connect the camera to your computer (page 116).
2.On your computer, click the following: Start * All Programs * 
CASIO * Photo Transport.
This starts up Photo Transport.
3.Display the screen whose screen capture you want to transfer.
4.Click the [Capture] button.
5.Draw a boundary around the area you want to capture.
Move your mouse pointer to the upper left corner of the area you want to capture 
and then hold down...

124Using the Camera with a Computer
You can copy moving subjects (animated characters) from your computer to the 
EXILIM. You also can convert Dynamic Photo images to movies and send them to a 
mobile phone for playback. To perform such functions, you need to install Dynamic 
Photo Manager on your computer from the CD-ROM that comes with your EXILIM.
For details, see the Dynamic Photo Manager user’s guide that comes with your 
EXILIM.
1.Start up your computer, and place the bundled CD-ROM into its CD-...

125Using the Camera with a Computer
Install the required software in accordance with what version of the Macintosh OS 
you are running and what you want to do.
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X 
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5, 10.6) 
only. Use the standard USB driver that comes with your supported operating 
system.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially...

126Using the Camera with a Computer
4.Turn off the camera and 
then use the USB cable 
that comes with the 
camera to connect it to 
your Macintosh.
• The camera does not 
draw power over the USB 
cable. Make sure the 
camera’s battery is 
sufficiently charged 
before connecting.
• Make sure that you insert 
the cable connector into 
the USB/AV port until you 
feel it click securely into 
place. Failure to insert 
the connector fully can 
result in poor 
communication or 
malfunction.
• Note that even...

127Using the Camera with a Computer
8.After the copy operation is complete, drag the drive icon to Trash.
9.On the camera, press [ON/OFF] (Power) to turn off the camera. After 
making sure that the green back lamp is unlit, disconnect the camera 
from the computer.
.To view copied images
1.Double-click the camera’s drive icon.
2.Double-click the “DCIM” folder to open it.
3.Double-click the folder that contains the images you want to view.
4.Double-click the image file you want to view.
• For information...

128Using the Camera with a Computer
If you are running Mac OS X, you can manage snapshots using iPhoto, which comes 
bundled with some Macintosh products. If you are running Mac OS 9, you will need to 
use commercially available software.
You can use QuickTime, which comes bundled with your operating system, to play 
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh 
and then double-click the movie file.
.Minimum Computer System Requirements for Movie Playback
The minimum...

129Using the Camera with a Computer
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer 
in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems 
Incorporated website and install Acrobat Reader.
1.On the CD-ROM, open the “Manual” folder.
2.Open the “Digital Camera” folder and then open the folder for the 
language whose user’s guide you want to view.
3.Open the file named “camera_xx.pdf”.
• “xx” is the language code (Example: camera_e.pdf is for...

130Using the Camera with a Computer
IMPORTANT!
• Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or 
turn off Eye-Fi card communication (page 134) when on an aircraft or in any other 
location where use of wireless communication is limited or prohibited.
• Loading an Eye-Fi card will cause the Eye-Fi indicator   to 
appear on the monitor screen. Its transparent or not transparent 
appearance indicates the communication status as shown below.
• A communication icon   will...