Casio EX S200 User Manual

131Using the Camera with a Computer
The camera creates a file and saves it each time you shoot a snapshot, record a 
movie, or perform any other operation that stores data. Files are grouped by storing 
them in folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder 
Structure” (page 132).
• You can view folder and file names on your computer. For details about how file 
names are displayed on the camera’s monitor screen, see page...

132Using the Camera with a Computer
The camera stores images you shoot in accordance with the Design Rule for Camera 
File System (DCF).
.About DCF
The following operations are supported for DCF-compliant images. Note, however, 
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s 
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another...

133Using the Camera with a Computer
.Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When 
displaying an image recorded on another camera, it may take a long time for the 
image to appear on this camera’s monitor screen.
.Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM 
folder and all of its contents. A...

134Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform 
other operations in both the REC mode and PLAY mode.
Procedure
[SET] * MENU * Set Up Tab * Screen
You can change the brightness of the monitor screen.
Procedure
[SET] * MENU * Set Up Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 129).
See the following for more information.
– REC Menu (page 63)
– PLAY Menu (page 90)
Adjusting Monitor Screen...

135Other Settings (Set Up)
Procedure
[SET] * MENU * Set Up Tab * Sounds
• Setting a volume level of 0 mutes output.
Procedure
[SET] * MENU * Set Up Tab * Quick Mode
When the Quick Mode is enabled, pressing the shutter button turns on the camera. 
Then the camera will turn back off a few seconds after you shoot a snapshot. This 
simplifies operation to one-touch power on and recording, followed by automatic 
power off.
• If you turn on the camera using a procedure other than Quick Mode, the camera 
will...

136Other Settings (Set Up)
Procedure
[SET] * MENU * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p] 
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the 
special startup image provided in the camera’s built-in memory.
• If you select an audio snapshot as the startup image, the audio will not play at 
startup.
• Formatting built-in memory...

137Other Settings (Set Up)
Procedure
[SET] * MENU * Set Up Tab * Create Folder
• Images recorded with the BEST SHOT “For eBay” or “Auction” scene, and the “For 
YouTube” scene are stored in special folders. They are not stored in the folder you 
create here.
• Deleting all of the files in a folder cause the folder to be deleted as well.
Procedure
[SET] * MENU * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different 
from your Home City when you go...

138Other Settings (Set Up)
Procedure
[SET] * MENU * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in 
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or 
deleted.
Example: July, 10, 2012, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later 
using the DPOF function or some printing application (page 113).
• Digital zoom is disabled...

139Other Settings (Set Up)
Procedure
[SET] * MENU * Set Up Tab * Adjust
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 137) before setting the time and date. If 
you set the time and date while the wrong city is selected for your Home City, the 
times and dates of all of the World Time cities (page 137) will be wrong.
Procedure
[SET] * MENU * Set Up Tab * Date Style
You can select from...

140Other Settings (Set Up)
Procedure
[SET] * MENU * Set Up Tab * Language
.Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
• Camera models sold in certain geographic areas 
may not support display language selection.
Procedure
[SET] * MENU * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed 
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger...