Casio EX FC200S User Manual

101Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 32 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [SET] to start playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/fast 
reverse[4] [6] (Playback in progress.)
• Each press of either button increases the speed of the 
fast forward or fast reverse...

102Viewing Snapshots and Movies
1.Press [p] (PLAY), and then use [4] and [6] to 
display the panorama images you want to 
view.
2.Press [SET] to start playback of the panorama.
Panorama playback causes the image to scroll left, 
right, up, or down.
Playback Controls
• The following functions cannot be performed on a panorama image.
Dynamic Photo, Movie Converter, MOTION PRINT, Movie Editing, Trimming, 
Resize, Lighting, White Balance, Brightness, Rotation
Viewing a Panorama Image
To start or pause...

103Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS 
group that includes all of the images for that particular CS session. You can use the 
following procedure to play back the images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] to display the CS group 
whose images you want to view.
2.About one second after you select a CS group, high speed playback of 
its images will start automatically.
• After playback of a CS...

104Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to 
start image playback.
You can use the following procedures to delete images while playback is in progress 
or paused.
.Deleting a Specific CS Group File
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [4] and [6] to display the image you want to...

105Viewing Snapshots and Movies
.Deleting Multiple Files in a CS Group
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [8] and [2] to select “Delete Frames” and then press [SET].
• This displays a file selection screen.
4.Use [8], [2], [4], and [6] to move the selection boundary to the file 
you want to delete, and then press [SET].
• This will select the...

106Viewing Snapshots and Movies
Use the following to divide up a CS Group into individual images.
.Dividing Up a Specific CS Group
1.While a CS group is displayed or while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select the “PLAY” tab.
3.Use [8] and [2] to select “Divide Group” and then press [6].
4.Use [4] and [6] to display the CS group you want to divide up.
5.Use [8] and [2] to select “Divide” and then press [SET].
• To divide up other CS group...

107Viewing Snapshots and Movies
Use the following procedure to copy an image in a CS group to a location outside of 
the group.
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Copy”, and then press [SET].
3.Use [4] and [6] to display the image you want to copy.
4.Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS...

108Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the zoomed 
image on the monitor screen. Slide the zoom controller 
towards w to unzoom the image.
– When monitor screen contents are turned on, a 
graphic in the lower right corner of the screen 
shows what part of the zoomed image is currently 
displayed.
– To exit the zoom...

109Viewing Snapshots and Movies
1.Use the optionally available AV cable (EMC-8A) to connect the camera 
to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• Make sure that the camera is turned off...

110Viewing Snapshots and Movies
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the 
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output 
system (page 162).
4.Now you can display images and play back movies as you normally do.
IMPORTANT!
• Before connecting to a TV to display...