Casio EX FC200S User Manual

111Viewing Snapshots and Movies
Use a commercially available HDMI cable to 
connect the camera to the TV. For information 
about playback, see the procedure starting 
from step 2 under “Viewing Snapshots and 
Movies on a TV Screen” on page 109.
• Use a commercially available HDMI cable that is marked with the logo shown to the 
right.
IMPORTANT!
• Output to a TV is not supported while the camera is in the REC mode.
NOTE
• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini...

112Viewing Snapshots and Movies
.Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * Set Up Tab * HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an 
HDMI cable.
*1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output 
method may be 576p when outputting to a digital TV in a PAL reception area that does 
not support 1080i 60i. If you are in a PAL reception area and nothing is displayed 
automatically,...

113Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 85.
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All images except Z
: All...

114Other Playback Functions (PLAY)
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the 
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
Effect
Select the effect you...

115Other Playback Functions (PLAY)
You can replace the built-in slideshow background music with other music from your 
computer.
Supported File Types:
• PCM format (16-bit, monaural / stereo) WAV files
• Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz
Number of Files: 9
File names: SSBGM001.WAV to SSBGM009.WAV
• Create the music files on your computer using the above names.
• Regardless of which effect pattern you select, the music files you store in camera 
memory are played back in name sequence....

116Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Movie Screen * [MENU] * PLAY Tab * 
MOTION PRINT
1.Use [4] and [6] to scroll through the movie frames and display the one 
you want to use as the image of the MOTION PRINT image.
Holding down [4] or [6] scrolls at high speed.
2.Use [8] and [2] to select “Create” and then press [SET].
• Only the frames of movies recorded on this camera can be used in a MOTION 
PRINT image.
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * 
PLAY...

117Other Playback Functions (PLAY)
3.Press [2] to display the editing menu and specify one or two cut 
points.
4.Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to 
perform any camera operation until the “Busy... Please wait...” message 
disappears from the monitor screen. Note that a cut operation can take a long 
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The...

118Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
in existing images.
NOTE
• Correcting the lighting when shooting produces better results (page 99).
• Altering the lighting of an image causes the original image and the new (altered) 
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and 
time...

119Other Playback Functions (PLAY)
NOTE
• You also can adjust the white balance when recording images (page 42).
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was originally recorded, not when the image was 
altered.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright)....

120Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Protect
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 164).
NOTE
• Performing the above procedure while a CS group is displayed will protect all the 
images in the CS group. You can protect individual images in a CS group by 
performing the above procedure while the image is displayed.
.To protect a specific image in a CS group
1.While CS image playback is in...