Casio Ex Fc100 Users Guide

51Snapshot Tutorial
With High Speed CS, you can configure the camera to shoot at a speed of 3, 5, 10, 15, or 
30 images per second, as long as you keep the shutter button and there is memory 
available to store the images. With Prerecord CS, half-pressing the shutter button starts 
continual pre-recording of images to a temporary buffer. Then when you press the shutter 
button the rest of the way down, the camera stores what is currently in the buffer and starts 
real-time continuous shutter recording of...

52Snapshot Tutorial
• You can configure the mode so up to 25 images are pre-recorded to the buffer until 
you fully press the shutter button.
• The minimum number of pre-recorded buffer images you can specify is three. Total 
recording time depends on the current continuous shutter frames-per-second (fps) 
setting.
• Specifying zero for the number of pre-recorded images disables Prerecord CS and 
performs High Speed CS only (without pre-recording).
1.In the REC mode, press [MENU].
2.Use [4] and [6] to...

53Snapshot Tutorial
9.Use [8] and [2] to select the sixth control panel 
option from the top (Max CS shots).
10.Use [4] and [6] to select the maximum number of shots for each 
continuous shutter operation and then press [SET].
11.Use [8] and [2] to select the seventh control panel option from the top 
(Prerecord CS shots).
12.Use [4] and [6] to specify how many of the 30 images and for how 
long images should be pre-recorded in the buffer.
• Prerecord CS shooting is not performed when the number of...

54Snapshot Tutorial
14.Half-press the shutter button.
This will cause the camera to start pre-recording images.
• The camera will not emit a shutter sound when you half-press the shutter 
button while Prerecord CS is selected.
15.When you are ready to shoot, press the shutter button the rest of the 
way down.
This will record the images in the pre-record buffer and start recording new 
images in real-time. Images continue to be shot as long as you keep the shutter 
button depressed.
16.Real-time shooting...

55Snapshot Tutorial
Use the procedure below to specify how images should be saved after a High Speed 
CS operation.
1.In the REC mode, press [MENU].
2.Use [4] and [6] to select “REC” tab.
3.Use [8] and [2] to select “Save CS Images”, and then press [6].
4.Use [8] and [2] to change the setting.
Specifying the Method for Saving Continuous Shutter Images
Normal (Batch)
All images that were shot are saved after the continuous shutter operation is 
finished. 

56Snapshot Tutorial
5.Press [SET] to apply the setting.
Select & Save
After continuous shutter shooting is finished, the shot images are played back 
at slow speed so you can select the images you want to save.
• When shooting with Prerecord CS, the first image saved when you press the 
shutter all the way is indicated by an “S” mark so you can tell where the 
continuous shutter operation started.
1While the shot images are playing back and an image 
appears that you want to save, press the shutter...

57Snapshot Tutorial
• If there is not enough available capacity on the memory card, you may not be able 
to record the number of CS images indicated on the monitor screen. Make sure 
your memory card has sufficient remaining capacity before shooting with using 
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for 
successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is 
finished.
• In the Continuous...

58Recording Movies
Recording Movies
The following procedure explains how to record a standard (STD) movie.
See the pages indicated below for more information about movies.
High-definition movie (HD movie): page 60
High speed movie (HS movie): page 61
1.In the REC mode, set the movie 
mode switch to ³ (HD/STD).
2.Press [MENU].
3.Use [4] and [6] to select the “Quality” tab.
4.Use [8] and [2] to select “» Quality” and then press [6].
5.Use [8] and [2] to select “STD” (Standard), 
and then press [SET].
•...

59Recording Movies
Shooting with BEST SHOT
With BEST SHOT (page 66), you can select the sample scene that matches the type 
of movie you are trying to shoot and the camera will change its setup accordingly, for 
beautiful movies every time. Selecting the “Natural Green” BEST SHOT scene, for 
example, will shot images with vivid green trees and grass.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during 
HD and STD...

60Recording Movies
• Only digital zoom can be used for zooming during movie recording. Since optical 
zoom is not possible while recording a movie, zoom as required before pressing 
[0] to start recording.
• The effects of camera movement in an image become more pronounced when you 
shoot close up or with a large zoom factor. Because of this, use of a tripod is 
recommended under these conditions.
• Face Detection is disabled during movie recording.
• Even when recording with the “For YouTube” and...