Casio Ex Fc100 Users Guide

91Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is 
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the 
screen. If “— Free” is selected for the “AF Area” setting (page 88) when you half-
press the shutter button, focusing is performed for the area specified by “— Free”. 
If “Face...

92Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Save CS Images
See page 55 for details.
Procedure
[r] (REC) * [MENU] * REC Tab * Digital Zoom
Select “On” when you want to use digital zoom (page 48).
• Digital zoom is disabled while shooting with the following feature.
– High speed movie recording
Procedure
[r] (REC) * [MENU] * REC Tab * L/R Key
You can assign one of the three functions listed below to the [4] and [6] keys.
Configuring the Continuous Shutter Image Save Method 
(Save CS...

93Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without 
waiting for Auto Focus. This will record the image using a high-speed focus operation 
that is much faster than Auto Focus.
NOTE
• Quick Shutter is disabled when the zoom factor is greater. Recording is performed 
using Auto Focus at this time.
Procedure
[r] (REC) * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a...

94Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode 
monitor screen for easy vertical and horizontal alignment 
when composing images.
Procedure
[r] (REC) * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for 
certain icons when you switch between REC functions.
Functions Supported by Icon Help
• REC Mode
• Available options for the “L/R Key” setting
Displaying the On-screen Grid...

95Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
This setting lets you specify which camera settings should be remembered by the 
camera when it is turned off, and restored the next time the camera is turned on. To 
have the camera remember a setting, you should enable the setting’s memory. Any 
setting whose memory is disabled will be reset to its initial default any time the 
camera is turned off.
*Optical zoom setting only.
Configuring Power On Default Settings (Memory)...

96Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot)
• The “Fine” setting helps to bring out details when shooting dense tree branches or 
leaves, a complex pattern, etc.
• Memory capacity (the number of images you can record) will be affected by the 
quality settings you configure (page 183).
Procedure
[r] (REC) * [MENU] * Quality Tab * » Quality (Movie)
This setting can be used to specify HD or STD as the image quality for movie 
recording when HD/STD is selected as the...

97Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * HS » Speed
See page 61 for details.
Procedure
[r] (REC) * [MENU] * Quality Tab * MeteringThe metering mode determines what part of the subject is metered for exposure.
Procedure
[r] (REC) * [MENU] * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
when shooting images.
Setting the High Speed Movie Frame Rate (HS » Speed)
Specifying the Metering Mode (Metering)
 MultiMulti-pattern...

98Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify flash intensity to one of five levels from +2 (brightest flash) to –2 
(least bright flash).
• Flash intensity may not change when the subject is too far away or too close.
Procedure
[r] (REC) * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Procedure
[r] (REC) * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness settings from +2...

99Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 31 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [SET] to start playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/fast 
reverse[4] [6] (Playback in progress.)
• Each press of either button increases the speed of the 
fast forward or fast reverse...

100Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS 
group that includes all of the images for that particular CS session. You can use the 
following procedure to play back the images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] to display the CS group 
whose images you want to view.
2.About one second after you select a CS group, playback of its images 
will start automatically.
• Playback of the group loops, which...