Casio At5 User Manual

Using the Pattern Sequencer
E-99
■Replacing the Accompaniment Patterns of an 
Existing Rhythm with New Recordings
With this procedure, you re-record one or more of the 
accompaniment patterns of an existing preset rhythm or 
previously stored user rhythm to create a new rhythm.
In this case, you clear all of the rec areas included in an 
accompaniment pattern and then create new recordings of 
each part of the accompaniment pattern. Use this method, for 
example, when you want to create only a new INTRO...

Using the Pattern Sequencer
E-100
3.Use buttons L-13 (INTRO) through L-16 
(SYNCHRO/ENDING) to select the 
accompaniment pattern you want to play. If you 
want to play the INTRO accompaniment pattern, 
for example, press the L-13 (INTRO) button.
 Each press of the L-14 (NORMAL/FILL-IN) button 
toggles between NORMAL and NORMAL FILL-IN, and 
each press of the L-15 (VARIATION/FILL-IN) button 
toggles between VARIATION and VARIATION FILL-IN.
 The indicator for the currently selected accompaniment 
pattern...

Using the Pattern Sequencer
E-101
1.While the pattern sequencer screen is 
displayed, press the C-6 (RECORD) button.
 The button will start to flash and the Digital Keyboard 
will enter record standby.
2.While holding down the R-13 (FUNCTION) 
button, press the C-17 (MENU) button.
 This displays a rec menu screen like the one shown 
below.
3.Use the R-17 (t, y) buttons to select one of 
the items described in the table below and then 
use the dial or R-14 
(–, +) buttons to change the 
setting.
 The...

Using the Pattern Sequencer
E-102
1.Perform steps 1 through 6 under “To rehearse 
before editing an existing rhythm” (page E-99).
2.Perform the procedure under “To configure 
pattern rec settings (Rec Menu)” (page E-101).
 This step is not necessary if you want to perform 
operations using initial default settings or if you want to 
use previous settings without changing them.
3.Press the L-14 (NORMAL/FILL-IN) or L-15 
(VARIATION/FILL-IN) button to select the 
accompaniment pattern you want to edit.
 You...

Using the Pattern Sequencer
E-103
6.If you want to record notes you play on the 
keyboard in real time, perform the following 
steps.
 The operation you can perform here depends on the 
status (page E-98) of the currently selected part, as 
described below.
7.If required, perform the procedure under “To 
edit events with the pattern sequencer” (page 
E-110).
 You can make fine corrections to the notes you played 
on the keyboard and add new notes, if you want. For 
details, see “Editing Individual Events...

Using the Pattern Sequencer
E-104
8.Repeat steps 4 through 7 for all of the parts you 
want to edit.
 It is recommended that you save the rhythm as a user 
rhythm each time you finish editing each 
accompaniment pattern. For details about how to do 
this, see “To store an edited or newly created rhythm” 
(page E-106).
9.Repeat steps 3 through 8 to edit all of the 
rhythm’s accompaniment patterns you want.
10.After completing all of the editing you want, 
adjust the tempo of the rhythm as desired.
 The...

Using the Pattern Sequencer
E-105
6.Configure mixer settings for the selected 
instrument part. You can skip this step if you do 
not want to configure mixer settings.
 For details about mixer setting operations, see step 5 
under “To edit an existing rhythm” (page E-102).
7.Configure part parameter settings for the 
selected instrument part. You can skip this step 
if you do not want to configure part parameter 
settings.
 You also will be able to configure part parameter 
settings after recording, if...

Using the Pattern Sequencer
E-106
1.Press the C-4 (PATTERN SEQUENCER) button.
 This displays the pattern sequencer screen. For details 
about screen contents, see step 2 under “To rehearse 
before editing an existing rhythm” (page E-99).
2.Perform the procedure under “To clear all rec 
areas included in the currently selected 
rhythm” (page E-115).
3.Perform the procedure under “To configure 
pattern rec settings (Rec Menu)” (page E-101).
 This step is not necessary if you want to perform 
operations...

Using the Pattern Sequencer
E-107
 Pressing the R-15 (EXIT) button in place of the operation in 
step 1 displays the confirmation screen shown below. 
Pressing the R-14 (YES) button at this time will display the 
user rhythm store screen in step 2.
To cancel the editor operation without saving the edited 
results, press the R-14 (NO) button.
1.Press the C-4 (PATTERN SEQUENCER) button 
to display the pattern sequencer screen.
2.While holding down the R-13 (FUNCTION) 
button, press the C-17 (MENU) button....

Using the Pattern Sequencer
E-108
6.Use the R-17 (u, i) buttons to select the 
instrument part you want to edit.
7.Edit the selected accompaniment pattern 
instrument part as desired.
 While performing the procedure below, you can press 
the L-17 (START/STOP) button and perform repeat 
playback of only the accompaniment pattern you are 
editing. Each press of the L-17 (START/STOP) button 
starts or stops playback.
 Performing rhythm assignment in step (1) above also 
will automatically change mixer...