Carrier Systxccitno1a Manual

							25
A12110
REMINDERS
With the Infinity Touch Control, there are accessory messages to remind you when
it is time for maintenance. Select theREMINDERSicon from the menu screen.
A12123
SYou have the option of choosing a pop --up reminder for your air filter,
humidifier, UV lights, or ventilator pre --filter.
STo enable a reminder, touchYES.
SAfter you have selected your desired reminders, touchSAVE. 
						

							26
OPERATING STATUS
The OPERATING STATUS menu gives a quick look at the status of your InfinityR
Heating and Cooling System.
A12173
Within the operating status, you can view which function is operating, and what
stage the heating or cooling equipment is in. When you are finished looking at the
operating status, press theDONEbutton to return to the previous menu.
Accessories Status
Within the accessory status, you can view how much of each accessory has been
consumed, and reset the counter for each accessory.
STo reset the counter for your installed accessory, touch theRESETbut-
ton, then pressSAVE.
STo return to the previous menu, pressCANCEL. 
						

							27
A12108
Temperature Control Status
The Temperature Control Status allows you to take a quick look at the actual
temperatures, and temperature set points for each zone in your system.
SWhen you are done looking at your zone status, pressDONE.
The system will indicate which mode is running by showing an arrow, which points
to either the heating or cooling set point.
If the system is preparing for the next program period, an indicator will be
displayed to show that the system is moving the temperature toward the next
programmed set point.
A14278 
						

							28
DISPLAY
The following display preferences can be adjusted for Infinity Touch Control,
Temperature Units(°For°C),Backlight Levels,Sound SettingsandScreen
Saver Settings.
A14256
Temperature Units
Select the desired temperature units, either°F for Fahrenheit, or°Cfor
Celsius and touch SAVE.
A14257
Backlight Levels
SBacklight levels are programmable for each Comfort Profile setting
HOME,AWAY,WA K E,orSLEEP. 
						

							29 SUse the Up (Y) and Down (B) buttons to set/change the brightness of
back lighting.
dBrightness levels include OFF or 1 --10°.
NOTE:After 30 seconds of inactivity on the touch screen, the backlight levelshall
be set back to the current selected level which may be OFF.
A14258
Sound Settings
To allow a buzzer to sound on each touch of the screen, touchENABLE;otherwise,
touchDISABLE.
A14259 
						

							30
Screen Saver Settings
To allow a photo to act as a screen saver, touchENABLE; otherwise, touch
DISABLE.
A14260
Touch Screen Calibration
If you experience any problems with touch positionaccuracy, Touch Screen
Calibration can be performed by following the on --screen prompts.
A14261 
						

							31
ENERGY TRACKING
The Infinity Touch Control has the ability to monitor and estimate the energy
consumption of certain models of your Infinity System.
A12111
STouchVIEW ENERGY USAGEto view the estimated energy con-
sumption in daily, monthly or annual time intervals. You can view ener-
gy consumption in units (kWH for electric and selected unit for gas
heat), or in dollars.
SIf a gas furnace is installed, you canSELECT FUEL TYPE(natural gas
or propane), and alsoSELECT FUEL DISPLAY UNITS.
STouchENTER ENERGY PRICESto enter the current electric and gas
utility rates.
dUse the Up (Y) and Down (B) buttons to set the costs per KWH
and cost per Therm or your selected unit.
dOnce the correct pricing is entered, pressSAVE. 
						

							32
A12113
TIME / DATE
TheTIME/DATEicon allows you to set the time and date for the Infinity Touch
Control.
A14250
Set Time and Date
The time and date can either be set manually or can be synchronized with the web
server (only for Wi--Fi enabled units). From the main screen, touch MENU, on the
bottom of the control. TheTIME/DATEicon will bring up the time and date menu.
Manually Adjust Time and Date
Select manually adjust time and date and follow these steps: 
						

							33 STo s e t t h eHOUR, MINUTE, MONTH, DAY,orYEAR,touch the
feature you wish to change.
A14251
SUse the Up (Y) and Down (B) buttons to make the appropriate
changes.
SWhen you have completed all of the settings touchSAVE.
Setup Daylight Savings Time
You can program your Infinity Touch Control to automatically adjust for daylight
saving time. From this screen, you can also choose to override the preprogrammed
start and end dates for daylight saving.
A14252 
						

							34
Setup Time Zone
The time zone can be selected by selecting the setup time zone from the menu.
Then select the time zone for the location. Time zones for both US and Canada are
included.
A14217
Enable Time Synchronization
After setting up the time zone, the time synchronization can then be done. Both
must be done in order to enable time synchronization.
A14253