Carrier Systxccitno1a Manual

55
UTILITY SETUP
This section is only applicable if your utility company is running a demand
response or price response program in which you have agreed to participate.
Contact your local electrical utility company for information about programs in
your area.
NOTE:If you do want to participate with your electrical utility company, a service
person must enable the utility event interface.
A14262
Utility Event
Your utility may send price response or demand response events to your Wi--Fi
enabled Infinity...

56 type of event, the adjustment to the heating and cooling set points, the
time the event will end, an accept button, and an override button.
SPressing the accept button will accept the adjustments made to the heat-
ing and cooling set points.
SPressing the override button will change the heating and cooling set
points back to their original values prior to the event.
Price Response
Price response determines how the heating and cooling set points will be adjusted
during a pricing event with two choices...

57
A14264
Demand Response
Demand response determines how the heating and cooling set points will be
adjusted during a demand response event with two choices -- offsets or absolute
temperature. When offsets are selected, the heating and cooling set points are
adjusted by the number of degrees selected. When absolute temperature is selected,
the heating and cooling set points are adjusted to heating and cooling temperatures.
A14265 

58
Demand settings
When a demand response is received from the utility company, the heating and
cooling set points will be adjusted according to the absolute temperature or offset
shown here. If the set point at the time of the event is more favorable (uses less
energy) than what you have programmed, the Infinity Touch Control Thermostat
will use the more favorable set point for the duration of the event.
A14266
Response Limits
Response limits are minimum heating and maximum cooling temperatures allowed...

59
Restore UE factory Default Settings
Restore UE (Utility Event) factory default settings will restore all utility event set
points and price settings to their original factory default values.
A14268 

60
NOTES 

Infinity, Touch ’N’ Gotand HYBRIDHEATRare trademarks or registered
trademarks of Carrier Corporation in the United States and other countries. Other
brands and product names are trademarks of their respective holders.
U.S. Export Classification: EAR99.
Version 11 Software Release
Copyright 2014 Carrier Corp.S7310 W. Morris St.SIndianapolis, IN 46231
Edition Date: 03/14 997-011290-7-R
Manufacturer reserves the right to change, at any time, specifications
and designs without notice and without...