Carrier Systxccitno1a Manual
Here you can view all the pages of manual Carrier Systxccitno1a Manual. The Carrier manuals for Electronics are available online for free. You can easily download all the documents as PDF.
Page 41
35 SERVICE Selecting theSERVICEicon from the menu screen will allow you to view service contact information, set--up or modify service reminders and update the software for your wall control. A14254 Service Information Your dealer information is easily accessible and may already be pre --programmed in your Control by your dealer. Select the SERVICE INFORMATION option. SEither your dealer’s contact information or the Carrier Service number, 1 --800 --Carrier, will appear. SThis information will also...
Page 42
36 Service Reminder Update This option will allow you to setup routine service reminders. Once the reminder option is enabled, you can select the frequency of these reminders (3 to 18 months). A13251 Software Update Carrier will periodically issue software updates for the Infinity Touch control. For the Wi--Fi models, SYSTXCCITC01 --A and SYSTXCCITW01 --A, updates will download automatically through your Wi--Fi connection, allowing you to install them at your convenience. For non --Wi--Fi a model,...
Page 43
37 Updating Software Using USB SWhen software updates are available, they will be posted to on the downloads page of the MyInfinity website, www.MyInfinityTouch.Carrier.com/Infinity/Downloads . NOTE: You will obtain best results using a USB drive that is 2GB, 4GB or 8GB in size. SFrom the downloads page on the MyInfinity website, click on the link under the Download Latest Software SRead the End User License Agreement (EULA). SAt the bottom of the EULA, choose “Yes” if you accept the agreement. dNOTE: If...
Page 44
38 SHighlight the TSTAT folder in the WinZip window by clicking on the folder icon ONCE to highlight the proper folder to be downloaded to the USB drive. Then click onEXTRACT. SChoose the USB memory device root directory as the location to extract the folder from the zip file. When the download is complete, the TSTAT folder will appear on the root directory of the USB device. Verify that the files, including the “.hex” file, have been extracted into the TSTAT folder of the USB drive. A13254 SPlug the USB...
Page 45
39 SThe Infinity Touch control will perform a restart after theDONEbutton is pressed. Once the Infinity Touch control has successfully restarted, the USB device may be removed. SThis completes the software upgrade process. Updating Software Using Wi--Fi (SYSTXCCITCC01 --A and SYSTXCCITW01 --A models only) When software updates are available, this reminder message will be displayed on the home screen of the Wi--Fi models, only. A13255 Touch anywhere inside the software update reminder message to install...
Page 46
40 SelectingYESwill initiate the softwareupdate process. Your Infinity Touch control will reboot in order to complete the software update process. All of your previously stored information and settings will be maintained. NOTE: SelectDETAILSto view the release notes associated with the software to be downloaded. SelectingNOwill allow to set--up a reminder for a later time or you can disable the reminder feature for this particular software update. A13257 Model / Serial Numbers This screen will allow you...
Page 47
41 PHOTO UPLOAD With the Infinity Touch Control, you can upload a personal photo to act as a screen saver. Select thePHOTO UPDATEicon from the menu screen. A12122 SUse the PC application to upload the photo on the control and save it to a standard USB drive. Go to https://www.MyInfinityTouch.comand select the Infinity Touch Control and click the downloads tab to down- load the MyInfinity application for either PC or MAC. Install the soft- ware on your computer, then go to the Menu and select Photo...
Page 48
42 HEATSOURCE (IF APPLICABLE) With the Infinity Touch Control, you can select the desired heat source of your system, if your system is equipped as a HYBRIDHEATRSystem. Select the HEATSOURCEicon from the menu screen. A12155 NOTE:Options available on this screen will correspond to the equipment attached. SThe default is for the system to control the heat source. STo have only the furnace control, selectFURNACE ONLY. STo have only the heat pump, selectHEAT PUMP ONLY. SWhen you have made the appropriate...
Page 49
43 ZONE NAMES (IF APPLICABLE) With the Infinity Touch Control, you have the ability to customize zone names. Select theZONE NAMESicon from the menu screen. A12156 STouch the zone in which you choose to change the name. SChoose between selecting aCOMMON NAMEorCREATE A CUS- TOM NAME. dIf you choose select a common name, touch the name you want for that particular zone. dIf you choose create a custom name, use the (or clear) button to erase the existing zone name. Then, use the on --screen keyboard to type...
Page 50
44 SCREEN LOCK The screen may be locked by selecting theSCREEN LOCKicon from the menu screen. A13246 SA message will pop up asking if you want to proceed with the screen lock. SelectingYe swill lock the screen and take you back to the home screen. A13247 STo unlock the screen, press and holdUNLOCKin the bottom left hand corner for 10 seconds.
All Carrier manuals