Canon Xeed Sx7 Mark Ii Lcos X3 Users Manual

							91
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Screen Mode (3)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (1)
[Input signal select]
You can select a desired input signal type if the
auto PC adjustment function detects more than
one input signal types.
T
T
Select an input signal type suitable for the com-
puter from the displayed signal types.
Press the [MENU] button when you finish.
Display settings
Aspect
Projects a normal image with aspect
ratio of 4:3 on the screen with
aspect ratio of 4:3.
Projects an image with aspect ratio
of 4:3 within the screen with aspect
ratio of 16:9.
Projects a video image with aspect
ratio of 16:9.
zEach item may become unavailable
depending on the setting of [Screen
aspect].
VIDEO/S-VIDEOSCART
Full screen
4:3
WideDisplay settings
Input signal select
zSee P132 for the signal types sup-
ported by this projector.
ANALOG PC 
						

							92
SETTING UP FUNCTIONS FROM MENUS
Selecting an Input Signal Type (2)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly (irregular color or no image).
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (3)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly.
T
T
Press the [MENU] button when you finish.
Display settings
Input signal select
Selects the input signal automati-
cally.
Select one of input signal types
shown on the left if video image is
not projected correctly in the [Auto]
mode.
zConfirm the input signal type accord-
ing to the Users Manual that came
with the AV equipment connected.
VIDEO/S-VIDEO
Auto
NTSC
PAL
SECAM
NTSC4.43
PAL-M
PAL-NDisplay settings
Input signal select
Selects the component format auto-
matically according to the input sig-
nal.
Select one of input signal types
shown on the left if video image is
not projected correctly in the [Auto]
mode. (575i is selected automati-
cally for the SCART input.)
zConfirm the input signal type accord-
ing to the Users Manual that came
with the AV equipment connected.
COMP./SCART
Auto
1080i
1035i
720p
575p
480p
575i
480i 
						

							93
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Total Number of Dots
[Total dots]
You can select the total number of dots in the
horizontal direction. Adjust the number of dots
when the image distorts or noise is displayed on
the screen at both sides.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Tracking
[Tracking]
You can fine-tune the timing for generating an
image from the image signal. Adjust the tracking
when the image flickers or distorts.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal settings
Total dots
Increases the total number of dots.
Decreases the total number of dots.
zPerform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
zThe setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>

< 
						

							94
SETTING UP FUNCTIONS FROM MENUS
Adjusting the Horizontal Position
[Horizontal position]
You can adjust the horizontal position of the
screen when the projected image is shifted in
the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Vertical Position
[Vertical position]
You can adjust the vertical position of the screen
when the projected image is shifted in the verti-
cal direction.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal settings
Horizontal position
Moves the screen to the right.
Moves the screen to the left.
zPerform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
zThe setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
<
Display settings
Input signal settings
Vertical position
Moves the screen up.
Moves the screen down.
zPerform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
zThe setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
< 
						

							95
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Number of Horizontal Pixels
[Horizontal pixels]
You can adjust the number of the pixels in the
horizontal direction if the length of the screen is
too long or too short in the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Number of Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in the
vertical direction if the length of the screen is too
long or too short in the vertical direction.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal settings
Horizontal pixels
Increases the number of pixels in
the horizontal direction.
Decreases the number of pixels in
the horizontal direction.
zPerform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
zThe setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
<
Display settings
Input signal settings
Vertical pixels
Increases the number of pixels in
the vertical direction.
Decreases the number of pixels in
the vertical direction.
zPerform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
zThe setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
< 
						

							96
SETTING UP FUNCTIONS FROM MENUS
Performing Progressive Processing
[Progressive]
You can accumulate and composite information
for a signal for a low resolution image to convert
it to a high resolution image.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Menu Position
[Menu position]
You can select the position of the menu dis-
played on the screen.
T
T
Move the menu to the desired position with [ ],
[], and then press the [OK] button.
Press the [MENU] button when you finish.
Display settings
Progressive
Does not perform the progressive
processing.
Performs the progressive process-
ing.
Performs the appropriate progres-
sive processing depending on the
input signal.
zYou can use this function if the input
signal is VIDEO/S-VIDEO or the com-
ponent signal is 575i or 480i.
You cannot use this function if the
component signal is 1080i, 1035i,
720p, 575p, or 480p.
zThis setting is saved for the currently
selected input signal.
zSelect [Off] when flickers and horizon-
tal lines are noticeable on a fast-mov-
ing picture.
zSee P136 for more detailed informa-
tion on the progressive processing.
VIDEO/S-VIDEOCOMP.
Off
On
AutoDisplay settings
Menu position
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
<
< 
						

							97
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Performing the Ceiling-mounted/Rear 
Projection
[Image flip H/V]
You can make this setting if you want to hang the
projector from the ceiling or project an image on
a transmissive screen.
T
T
Press the [MENU] button when you finish.
Display settingsImage flip H/V
Select this if you project an image
normally.
Select this if you project an image
with the projector hung from the
ceiling. The projected image is
inverted in both vertical and hori-
zontal directions.
Select this if you project an image
from behind the screen. The pro-
jected image is inverted in the hori-
zontal direction.
Select this if you project an image
from behind the screen with the pro-
jector hung from the ceiling. The
projected image is inverted in the
vertical direction.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
None
Ceiling mounted
Rear
Rear, Ceiling mounted
z When hanging the projector from the
ceiling, make sure to use optional
brackets. Contact your Canon dealer.
z The keystone adjustment will be reset.
None (Normal image)
Ceiling mounted
Rear
Rear, Ceiling mounted 
						

							98
SETTING UP FUNCTIONS FROM MENUS
Correcting the Screen Color
[Screen color]
You can adjust the while balance so that white
portions of the image are displayed correctly.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Capturing a Logo to Be Projected 
(SX60)
[Logo capture]
You can project a desired image (logo) when
you turn on the projector, there is no input signal,
or you blacken a projecting image temporarily.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Display settings
Screen color
Projects an image in a color tone
similar to that of natural light on a
standard screen.
Projects an image in an almost natu-
ral color tone on a greenboard (dark
green).
Adjusts color tone with the level
meter. To adjust the color tone auto-
matically, press the [AUTO SET]
button when the following level
meter is displayed. Use this function
if the [Greenboard] setting is inade-
quate.
If you manually adjust it, press [ ] or [ ] 
button to select red, green, or blue.
[>] Increases the color tone of each color.
[
						

							99
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Logo Display Position 
(SX60)
[Logo position]
You can select a logo display position. You can
place the logo at the center or a corner of the
screen.
T
T
T
Press the [MENU] button when you finish.
Displaying a Logo (No signal screen)
[No signal screen]
You can display a user logo on a screen when
there is no input signal. (SX60)
For SX7 MarkII, you can display either of a black
or blue screen.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Display settings
User screen settings
Logo position
Select a position you want to dis-
play a logo and press the [OK] but-
ton.
zYou cannot select [Logo position] if
you have not captured a logo on the
[Logo capture] screen.
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
Upper L
Upper R
Center
Lower L
Lower RDisplay settings
User screen settings
No signal screen
Displays no logo (black screen).
Displays no logo (blue background).
Displays a logo captured on the 
[Logo capture] 
screen. (SX60)
zYou cannot select [User logo] if you
have not captured a logo on the [Logo
capture] screen. (SX60)
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
(SX60)
Black
Blue
User logo 
						

							100
SETTING UP FUNCTIONS FROM MENUS
Displaying a Logo (NO SHOW)
[NO SHOW]
You can display a user logo on a screen when
the projected image is blackened out tempo-
rarily by pressing the [NO SHOW] button on the
remote control. (SX60)
For SX7 MarkII, you can display either of a black
or blue screen.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Logo at Startup
[Projector on]
You can display a specified logo on a screen
from the moment the projector is turned on to the
moment it is ready for projection.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Display settings
User screen settings
NO SHOW
Displays no logo (black screen).
Displays no logo (blue background).
Displays a logo captured on the
[Logo capture] screen. (SX60)
zYou cannot select [User logo] if you
have not captured a logo on the [Logo
capture] screen. (SX60)
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
(SX60)
Black
Blue
User logoDisplay settings
User screen settings
Projector on
Displays the Canon logo captured
at the factory.
Projects an image immediately after
turning on the projector.
Displays a logo captured on the
[Logo capture] screen. (SX60)
zYou cannot select [User logo] if you
have not captured a logo on the [Logo
capture] screen. (SX60)
DIGITAL PCANALOG PC
DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
(SX60)
Canon logo
Skip
User logo