Canon Wux450, Wx520 Multimedia Projector Users Manual

231
Using the Projector in Meeting Mode
Networked Multi-Projection
Operation in Each Mode
(7) Projector pull-down list
Lists connected projectors. Your actions  on this screen apply to the projector 
selected here.
(8) Computers Lists connected computers. To prepare computers for projection, drag them to 
the layout area. Your own computer is listed first.
In  , the computer’s display positi on is indicated by a white square.
(9) Blank the computer Pause projection from the computer. Click again to...

232
Using the Projector in Classroom Mode
In classroom mode, multiple computers are connected to multiple projectors. A 
single presenter can control any computer or projector used for projection, whether 
their own or those of others in attendance. Up to ten computers and six projectors 
can be connected.
Leading a New Session
1In the mode selection menu, select [Classroom Mode].
2The session selection menu is displayed. Click [New]. 

233
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
3The projector selection menu is displayed. In the list of projectors at left, 
click the projector to connect to.
You can select up to 6 projectors. Selected projectors are listed at right.
4Click [Next].
• If the [NMPJ Password] setting has been configured on the projector’s settings screen 
( P182 ), the password is now requested. Enter the password.
• To clear a selected projector, click   in the upper right...

Using the Projector in Classroom Mode
234
5A window for creating the session is displayed. Specify a session name, 
password, nickname, and desktop (primary or secondary monitor for 
projection), and then click [OK].
6The Classroom Mode window is displayed. Select a projector to control 
from the pull-down list.
• If you choose to set a session password, other users must enter that password to join 
the session. To set a password, click [Set] and enter the password.
• Desktop selection is only available...

235
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
7In the list at right, select a computer to use with your designated 
projector. Drag the computer to a desired position in the layout area.
You can arrange up to four computers as desired in the layout area.
8Drag the computers for use in projection in the layout area to rearrange 
them, as needed.During projection, screens of each comput er will be arranged according to their 
position in the layout area. 

Using the Projector in Classroom Mode
236
9Click [Start projecting].
Images are now projected from the computers in the layout area.
10To end the session, click   or   in the upper right.
• To stop projection, click [Stop projecting].
• To rearrange the layout during projection, click [Start projecting] again. Note that if you 
simply rearrange the layout, the new layout will not be applied to projection. 

237
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
11The following confirmation message is displayed. Click [Close].
Return to the mode selection menu. 

Using the Projector in Classroom Mode
238
Joining an Existing Session
1In the mode selection menu, select [Classroom Mode].
2The session selection menu is displayed. Click [Enter] next to the session 
to join.
To join a session in another subnet, click    and enter the projector’s IP address to find 
the projector. The application will search fo r sessions in the other subnet. For details, 
refer to “Using the Session Selection Menu” ( P252). 

239
Using the Projector in Classroom Mode
Networked Multi-Projection
Operation in Each Mode
3A session login window is displayed. Specify the session password, your 
nickname, and desktop (primary or secondary monitor for display), and 
then click [OK].
4The Classroom Mode window (for joining a session) is displayed. Users 
joining sessions cannot change the projection layout or start or stop 
projection.
Desktop selection is only available with computers that have dual monitor support. 

Using the Projector in Classroom Mode
240
5To end the session, click   or   in the upper right.
6The following confirmation message is displayed. Click [Exit].
Return to the mode selection menu.