Canon Wux450, Wx520 Multimedia Projector Users Manual

261
Using Layout Functions
Networked Multi-Projection
Functions in All Modes
■Projecting from Multiple Pr ojectors (Multi-Projection)
In Meeting and Classroom Modes, separate images from multiple projectors can be 
projected together. This is called “multi-projection.” On the layout window for 
Meeting or Classroom Modes, you can  set up the projection layout for each 
projector used.
1On the layout window for Meeting or Classroom Modes, specify the 
projection layout for each projector.
In the layout...

Using Layout Functions
262
■Switching the Primary/Secondary Monitor
Using the application, you can switch  between projection from the primary or 
secondary monitor.
If your computer has dual monitor suppor t, the computer icons are labeled with 
numbers. The primary monitor is labeled “1,” and the secondary one, “2.”
To switch the monitor used for projection, click the icon of computers shown with a 
number.
■ Temporarily Enlarge Images
During display from multiple computers, yo u can enlarge...

263
Using Layout Functions
Networked Multi-Projection
Functions in All Modes
■Projecting Session Information
You can project session information needed by other users to join a session, such 
as the session name and projector IP address. To project session information, click 
. To cancel display, click   again.
■Fully Blanking Projection
Blanking refers to temporarily stopping proj ection from computers, so that no image 
is projected. To blank projection, click  . To cancel blanking and return to...

Using Layout Functions
264
Meeting Mode window
Classroom Mode window (starting a session) 

265
Using Layout Functions
Networked Multi-Projection
Functions in All Modes
■Blanking Projection from Your Computer
In Meeting and Classroom Modes, you can  blank projection your computer alone. 
To blank projection from your computer,  click   in the computer list. To cancel 
blanking and return to normal  projection, click   again.
Broadcast Mode window
Meeting Mode window 

Using Layout Functions
266
■Checking for Computers That  Join or Leave Sessions
In Meeting and Classroom Modes, computer  users can join or leave sessions as 
needed. Computers joining a session are added to the computers listed on the 
layout window.
Classroom Mode window (joining a session) 

267
Using Layout Functions
Networked Multi-Projection
Functions in All Modes
Similarly, computers leaving a session are removed from the list of computers. 

268
Completing Application Projection Settings
Application settings can be configured to specify the image quality of computer 
projection, user nicknames, and other details.
1Click   next to the computer icon.
2The settings window is displayed. Complete each setting as needed, and 
then click [OK].Available settings are as follows. (Types  of settings vary slightly by mode.)
When setting windows are displayed while layout windows are minimized to the taskbar, 
some information may be cut off. 

269
Completing Application Projection Settings
Networked Multi-Projection
Functions in All Modes
Picture qual settingSelect one of the following options, depending on your 
preferred image quality and frame rate.
High : Projects at a lower frame rate while 
emphasizing image quality. Select this 
mode if lower image quality is not 
acceptable.
Medium : Projection with image quality and frame  rate balanced.
Low : Projects at lower image quality to maintain  a high frame rate. Select this mode to 
reduce...

270
Reducing Windows to a Compact Size
A compact version of windows in all modes is available, showing only the minimum 
buttons and information needed.
1Click .The window is now reduced to a compact size.
2To revert to original size, click  .
The title bar is no longer displayed when the cursor is away from the window, which 
makes the window even more compact.