Canon Sx80 Multimedia Projector Users Manual
Have a look at the manual Canon Sx80 Multimedia Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
Selecting Screen Aspect and Aspect
56
4Use [ ] / [ ] to select a screen aspect type.
4:3
Select this when you use a screen with aspect ratio of
4:3.
Suitable for projecting computer screen images or
visual software having aspect ratio or 4:3 or 5:4.
16:9
Select this when you use a screen with aspect ratio of
16:9. Suitable for projecting computer screen images
having aspect ratio of 16:9 or close to it.
16:9 D. image shift
Select this when you use a screen with aspect ratio of
16:9. Suitable for...](http://img.usermanuals.tech/thumb/14/85749/w64_canon-realis-sx80-manual_d-55.png "Page 56
Selecting Screen Aspect and Aspect
56
4Use [ ] / [ ] to select a screen aspect type.
4:3
Select this when you use a screen with aspect ratio of
4:3.
Suitable for projecting computer screen images or
visual software having aspect ratio or 4:3 or 5:4.
16:9
Select this when you use a screen with aspect ratio of
16:9. Suitable for projecting computer screen images
having aspect ratio of 16:9 or close to it.
16:9 D. image shift
Select this when you use a screen with aspect ratio of
16:9. Suitable for...")
![Page 57
57Selecting Screen Aspect and Aspect
Projecting an Image
■Moving Image with 16:9 D. Image Shift
1Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right.
2Use [ ] / [ ] to move the image.
3When the image shift adjustment has been completed, press the OK button.
Perform the following steps to reset the image shift adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [D.Image Shift reset] window.
On the window, select [OK] with [](http://img.usermanuals.tech/thumb/14/85749/w64_canon-realis-sx80-manual_d-56.png "Page 57
57Selecting Screen Aspect and Aspect
Projecting an Image
■Moving Image with 16:9 D. Image Shift
1Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right.
2Use [ ] / [ ] to move the image.
3When the image shift adjustment has been completed, press the OK button.
Perform the following steps to reset the image shift adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [D.Image Shift reset] window.
On the window, select [OK] with [")
![Page 61
61
Projecting an Image
Turning Off the Projector
1Press the POWER button to pop up a window shown at the lower right.
Press the POWER button again while the confirmation message is displayed.
The lamp goes off, the [POWER] indicator starts flashing in red and the cooling fan
starts.
2Remove the power cord from the AC outlet.
It continues to cool down the lamp even after removing the power cord. Thus, you
may carry it immediately after the use.
With the power cord connected, the LED illumination lamp...](http://img.usermanuals.tech/thumb/14/85749/w64_canon-realis-sx80-manual_d-60.png "Page 61
61
Projecting an Image
Turning Off the Projector
1Press the POWER button to pop up a window shown at the lower right.
Press the POWER button again while the confirmation message is displayed.
The lamp goes off, the [POWER] indicator starts flashing in red and the cooling fan
starts.
2Remove the power cord from the AC outlet.
It continues to cool down the lamp even after removing the power cord. Thus, you
may carry it immediately after the use.
With the power cord connected, the LED illumination lamp...")
![Page 65
65 Useful Functions Available During a Presentation
Useful Functions Available During a Presentation
Adjusting the Volume
Useful when:
You want to adjust the volume level of the pro-
jectors or external speaker.
Press the button. The following screen
appears.
You can also adjust the volume level
with [] of the projector.
Adjust the volume or mute setting on the
computer if the volume level is too low.
You can also adjust the volume level of
the speakers connected via the audio
output...](http://img.usermanuals.tech/thumb/14/85749/w64_canon-realis-sx80-manual_d-64.png "Page 65
65 Useful Functions Available During a Presentation
Useful Functions Available During a Presentation
Adjusting the Volume
Useful when:
You want to adjust the volume level of the pro-
jectors or external speaker.
Press the button. The following screen
appears.
You can also adjust the volume level
with [] of the projector.
Adjust the volume or mute setting on the
computer if the volume level is too low.
You can also adjust the volume level of
the speakers connected via the audio
output...")
![Page 66
Useful Functions Available During a Presentation
66
Zooming an Image
Useful when:
Zoom in an object such as a small graph dur-
ing a presentation (up to 12x).
Focusing on the current subject.
Press the button. A part of the image is
enlarged each time pressed.
The magnification appears on the
screen.You can move the area to the enlarged by
using [ ] / [ ] / [].
You can restore the original size of the
image by pressing the button.
Remote control](http://img.usermanuals.tech/thumb/14/85749/w64_canon-realis-sx80-manual_d-65.png "Page 66
Useful Functions Available During a Presentation
66
Zooming an Image
Useful when:
Zoom in an object such as a small graph dur-
ing a presentation (up to 12x).
Focusing on the current subject.
Press the button. A part of the image is
enlarged each time pressed.
The magnification appears on the
screen.You can move the area to the enlarged by
using [ ] / [ ] / [].
You can restore the original size of the
image by pressing the button.
Remote control")
61 Projecting an Image Turning Off the Projector 1Press the POWER button to pop up a window shown at the lower right. Press the POWER button again while the confirmation message is displayed. The lamp goes off, the [POWER] indicator starts flashing in red and the cooling fan starts. 2Remove the power cord from the AC outlet. It continues to cool down the lamp even after removing the power cord. Thus, you may carry it immediately after the use. With the power cord connected, the LED illumination lamp turns on during cooling cycle. You cannot turn the projector on while the cooling fan is in operation. If you want to continue projecting, press a button other than POWER or wait until the con- firmation message disappears. You may shorten the lamp life if turning off the projector while its lamp is still in an unstable state shortly after turning on the projector. Wait at least 5 minutes before turning off the pro- jector. It may shorten the lamp life if you turn on the projector immediately after turning it off. Wait at least 5 minutes before turning on the projector when you turn off the projector. Using the projector for a long time may shorten the life of the lamp and internal optical components. Wait until the cooling fan stops before putting the projector in the carrying bag. Do not put the projector in the carrying bag until the cooling fan stops rotating. The projector may be damaged due to the heat. Attach the lens cap to the lens to protect it and put the projector in the carrying bag. Remote controlTop control
63 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash Memory Connecting the Projector to Network Appendix Index Useful Functions Available During a Presentation
Useful Functions Available During a Presentation 64 Blackened Out an Image Temporarily Useful when: You finished the presentation. You want to divert attendees attention from the screen. Press the button to blacken out the image. Press the button again to show the image. You can set the screen state while blackening out the image on the menu. You can also set a specified image. (P83) The lamp keeps a turn-on state while blackening out the image. The (middle) LED illumination lamp on the top control flush slowly while black- ening out the image. Freezing the Picture Useful when: You want to perform a computer operation which is irrelevant to the proceedings of the presentation. You want to stop a moving image. Press the button to freeze the moving image. The projector shows the following icon. Press the button again to cancel the FREEZE function. The (left and right) LED illumination lamps on the top control flushes slowly while stopping the image. Remote controlRemote control
65 Useful Functions Available During a Presentation Useful Functions Available During a Presentation Adjusting the Volume Useful when: You want to adjust the volume level of the pro- jectors or external speaker. Press the button. The following screen appears. You can also adjust the volume level with [] of the projector. Adjust the volume or mute setting on the computer if the volume level is too low. You can also adjust the volume level of the speakers connected via the audio output terminal. Muting the Sound Useful when: You want to temporality mute the unnecessary sound. You want to immediately mute the sound. Press the button to mute the sound. The projector shows the following icon. Press the button again to cancel the MUTE function. You can also mute the sound of the speakers connected via the audio out- put terminal. Remote controlRemote control
Useful Functions Available During a Presentation 66 Zooming an Image Useful when: Zoom in an object such as a small graph dur- ing a presentation (up to 12x). Focusing on the current subject. Press the button. A part of the image is enlarged each time pressed. The magnification appears on the screen.You can move the area to the enlarged by using [ ] / [ ] / []. You can restore the original size of the image by pressing the button. Remote control
67 Useful Functions Available During a Presentation Useful Functions Available During a Presentation Showing the Elapsed Time Useful when: You want to manage the proceedings of the presentation. You want to time duration of the presentation in advance. Press the button to start counting. The elapsed time is displayed at the lower right corner of the screen. Time is counted up to 59:59. Then the timer returns to 00:00. Press the button again to stop the timer. Press the button while the timer is stopped. The timer disappears from the screen. Then press the button to start count- ing from 00:00. Projecting Image Without Com- puter Useful when: You want to project an image from a digital camera. You want to project an image from USB flash memory. You can project an image directly by con- necting the projector with a PictBridge- compatible digital camera or USB flash memory. Remote control Digital camera USB flash memory Refer to P104 – P107. Refer to P108 – P114.
69 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash Memory Connecting the Projector to Network Appendix Index Setting Functions from Menus
70 How to Use Menus With a menu, you can set the operation of the projector in detail. ■Menu Configuration The menu screen is divided into four tabs as follows: Input Signal Types for which a Menu Item is Displayed Different menu items are displayed for different input signal types. In the following explanation of each menu item, the input signal type for which the menu item is displayed is indicated as follows: HDMICOMPONENT DIGITAL PCVIDEO/S-VIDEO ANALOG PCUSB Input signal for which the menu item is displayed Input signal for which the menu items is not displayed [System settings] tab (P92) You can set the operation of the projector.[Display settings] tab (P73) You can set the type of signal or the method of projection of the images input. [Image adjustment] tab (P85) You can adjust the image quality and colors as you like.[Information] tab (P101) You can confirm the information about the signal types of the images pro- jected and other projector-specific information. Menu itemsContents of menu