Canon Sx80 Multimedia Projector Users Manual

							111Projecting Data on USB Flash Memory
Projecting an Image from a Digital Camera or an USB Flash Memory
Selecting an Image for Projection
This section describes the steps for selecting an image in the USB file browser and pro-
jecting on the screen.
■Selecting a Drive
If a USB flash memory is connected, skip this step.
If a USB memory card reader having multiple memory slots is connected, the drive (mem-
ory slot) list is displayed in the file list.
Select the drive in which the memory card is inserted with [ ] / [ ], and press the OK but-
ton.
 Active drives are displayed in white text, while inactive drives are grayed out.
 Icons indicate the memory card status of each drive. (They differ depending on the 
connected equipment.)
■Selecting a Folder
If the image file is located in a folder, select the folder with [ ] / [ ], and press the OK but-
ton.
 To return to upper hierarchy, select   and press the OK button. Example 1) Memory card is inserted and recognized properly.
Example 2) Memory card is inserted but cannot be recognized.
The file system is destroyed or the projector cannot recognize its for-
mat.

						

							Projecting Data on USB Flash Memory
112
■Selecting an Image File for Projection
1Select an image file with [ ] / [ ].
 To return to upper hierarchy, select   and press the OK button.
2Press the OK button to project the image in full screen.
 To return to the USB file browser, press the OK button.

						

							113Projecting Data on USB Flash Memory
Projecting an Image from a Digital Camera or an USB Flash Memory
Operating the Projected Image
When images are projected, you can perform the following operations.
■Switching to the Previous/Next Image
If multiple image files are saved in a folder, you can switch to the previous/next image by 
pressing [ ] / [ ].
■Rotating an Image
You can rotate the image by 90 degrees to the left or to the right by pressing [].
 Even if a slideshow is running, you can rotate the image by pressing [].
 If the image contains rotational information, the image is rotated to an appropriate 
direction automatically.
■Returning to the USB File Browser
To return to the USB file browser, press the OK button.

						

							Projecting Data on USB Flash Memory
114
Running a Slideshow of Data saved in a USB Flash 
Memory
You can run a slideshow that projects multiple images stored in a USB flash memory at 
certain intervals.
■Creating an Image File Folder
In the slideshow, image files in a folder are displayed in the alphabetical order of file 
name. Therefore, create a folder in the USB flash memory and save the image files to be 
projected in the slideshow in advance.
To start a slideshow, select and project the first image file in a folder in the full-screen dis-
play mode using the USB file browser.
If the slideshow interval described below has been set, the image files in a folder are 
automatically projected in sequence.
■Setting a Slideshow Interval
To run a slideshow, set the time interval in [Slideshow interval] from the menu in advance.
For the details of the setting step, refer to Running a Slideshow on page 107. 
						

							115
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory
Connecting the Projector to Network
Appendix
Index
Connecting the 
Projector to 
Network 
						

							116
Setting an IP Address
It is possible to send an error notification e-mail (P119) from the projector to the computer 
when you connect the projector to the network.
To connect via the network, an IP address must be assigned to the projector. Set an IP address 
by following the steps below. (The examples shown are Windows XP screenshot images.)
■Setting IP Address
1Connect the projector and a computer directly via a cross type LAN cable.
2Turn on the power of the projector and computer.
3Open [Control Panel] from the [Start] menu, then select [Network and Internet Con-
nections] - [Network Connections].
4Right-click [Local Area Connection], and open [Properties].
5Select [Internet Protocol (TCP/IP)] and click the [Properties] button. Take notes of the 
original network settings (IP address, subnet mask, DHCP settings, etc).
6Select [Use the following IP address] and set as follows:
[IP address]: 192.168.254.1
[Subnet mask]:  255.255.255.0
7When you have specified the settings, click the [OK] button and then click the [OK] but-
ton on the [Local Area Connection Properties] window to close it.
Commercial cross type LAN cable 
						

							117Setting an IP Address
Operating the Projector over Network
■If You Want to Reset the IP Address Setting
1Turn off the projector, and remove the LAN cable.
2Follow the steps 3 to 6 to restore the computers IP address and subnet mask that you 
have written down to the original values.
■Setting Network
1Launch a web browser, enter http://192.168.254.254 in the address, and click the 
[OK] button.
The login dialog box appears.
2In the password setting screen, enter root for [User name] and system for [Pass-
word], and click the [OK] button.
The projector network setting page appears on the web browser.
3Click the [Settings] button on the network setting page. 
						

							Setting an IP Address
118
4Click [TCP/IP] from the menu, enter IP address, Subnet mask and Default gateway to 
be assigned for the projector, and click the [OK] button.
[IP address]:  IP address of projector
[Subnet mask]:  Subnet mask of projector
[Default gateway]:  Default gateway of network
5Click [Mail] from the menu, enter information in the following fields, and click the [OK] 
button.
[To:]:  E-mail address to which error notification message is sent.
[Cc:]:  Second E-mail address to which error notification mes-
sage is sent (can be omitted).
[From:]:  Sender of E-mail (projector)
[SMTP server IP address]: IP address of available SMTP server
[SNTP server IP address]:  IP address of available SNTP server (can be omitted)
[Time zone]:  Time zone of installation site
[Mail resend interval]:  E-mail resend interval if the transmission has failed
Setting range: 0 – 59 seconds (factory default: 10 sec-
onds)
[Mail resend times]:  Number of resend times if the E-mail transmission has 
failed
Setting range: 0 – 255 times (factory default: 3 times)
[Error report]:  ON/OFF of error message sending function. Select [ON].
[OFF] is the factory default. 
						

							119Setting an IP Address
Operating the Projector over Network
6Click [Apply] in the menu.  When Save and apply settings. OK? message appears, 
click the [OK] button.
This completes the IP address setting of the projector.
■If You Want to Reset the Network Setting
1Access to the projector from web browser by performing the step 1 on “Setting Net-
work (P117).”
2Click [Initialize] in the network setting page.
3Click the [OK] button when “Initialize network settings?” message appears.
 To restore the settings with the projector operation, execute [Network setting initial-
ization] from the menu.
■Error Notification Message
If errors occur in the projector, the following messages are sent.
Error list
* Contact your Canon dealer.Errors related to 
temperatureError name Temperature abnormality
Te x tThe temperature inside the projector is too high for some 
reason or the outside air temperature is higher than the 
specified one. If the problem is inside the projector, 
check whether the projector is installed and operated 
normally, turn off the projector to cool its inside, and retry 
projection. If the same warning occurs again, the projec-
tor may be defective. Contact your dealer.
Errors related to 
the lampError name Faulty lamp
Te x tThe lamp has burnt out. Replace the lamp with a new 
one. If the same warning occurs again, the lamp drive 
circuit may be defective. Contact your dealer.
Errors related to 
the lamp coverError name Faulty lamp cover
Te x tThe lamp cover is open. Check whether the lamp cover 
is installed properly. If it is installed properly, the lamp 
cover detection switch may be defective. Contact your 
dealer.
Errors related to 
the cooling fanError name Faulty cooling fan
Te x tThe cooling fan or another component may be defective. 
Contact your dealer.
Errors related to 
the power supplyError name Faulty power supply
Te x tThe voltage of part of the power supply is abnormally 
high or any other problem has occurred in the power 
supply. Contact your dealer.
Other types of 
errorsError name Unknown Error
Text Codes in hexadecimal numbers* 
						

							120