Canon Sx80 Multimedia Projector Users Manual

61
Projecting an Image 
Turning Off the Projector
1Press the POWER button to pop up a window shown at the lower right.
Press the POWER button again while the confirmation message is displayed.
The lamp goes off, the [POWER] indicator starts flashing in red and the cooling fan 
starts.
2Remove the power cord from the AC outlet.
It continues to cool down the lamp even after removing the power cord. Thus, you 
may carry it immediately after the use.
With the power cord connected, the LED illumination lamp...

62 

63
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory
Connecting the Projector to Network
Appendix
Index
Useful Functions 
Available During 
a Presentation 

Useful Functions Available During a Presentation
64
Blackened Out an Image 
Temporarily
Useful when:
 You finished the presentation.
You want to divert attendees attention from 
the screen.
Press the   button to blacken out the 
image.
Press the   button again to show the 
image.
 You can set the screen state while 
blackening out the image on the menu. 
You can also set a specified image. 
(P83)
 The lamp keeps a turn-on state while 
blackening out the image.
 The (middle) LED illumination lamp on...

65 Useful Functions Available During a Presentation
Useful Functions Available During a Presentation
Adjusting the Volume
Useful when:
 You want to adjust the volume level of the pro-
jectors or external speaker.
Press the   button. The following screen 
appears.
 You can also adjust the volume level 
with [] of the projector.
 Adjust the volume or mute setting on the 
computer if the volume level is too low.
 You can also adjust the volume level of 
the speakers connected via the audio 
output...

Useful Functions Available During a Presentation
66
Zooming an Image
Useful when:
 Zoom in an object such as a small graph dur-
ing a presentation (up to 12x).
 Focusing on the current subject.
Press the   button. A part of the image is 
enlarged each time pressed.
 The magnification appears on the 
screen.You can move the area to the enlarged by 
using [ ] / [ ] / [].
You can restore the original size of the 
image by pressing the   button.
Remote control

67 Useful Functions Available During a Presentation
Useful Functions Available During a Presentation
Showing the Elapsed Time
Useful when:
 You want to manage the proceedings of the 
presentation.
 You want to time duration of the presentation 
in advance.
Press the   button to start counting.
 The elapsed time is displayed at the 
lower right corner of the screen.
 Time is counted up to 59:59. Then the 
timer returns to 00:00.
Press the   button again to stop the 
timer.
 Press the   button while...

68 

69
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory
Connecting the Projector to Network
Appendix
Index
Setting 
Functions from 
Menus 

70
How to Use Menus
With a menu, you can set the operation of the projector in detail.
■Menu Configuration
The menu screen is divided into four tabs as follows:
Input Signal Types for which a Menu Item is Displayed
Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which the 
menu item is displayed is indicated as follows:
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal for which the menu item is...