Canon Sx80 Multimedia Projector Users Manual

111Projecting Data on USB Flash Memory
Projecting an Image from a Digital Camera or an USB Flash Memory
Selecting an Image for Projection
This section describes the steps for selecting an image in the USB file browser and pro-
jecting on the screen.
■Selecting a Drive
If a USB flash memory is connected, skip this step.
If a USB memory card reader having multiple memory slots is connected, the drive (mem-
ory slot) list is displayed in the file list.
Select the drive in which the memory card is inserted...

Projecting Data on USB Flash Memory
112
■Selecting an Image File for Projection
1Select an image file with [ ] / [ ].
 To return to upper hierarchy, select   and press the OK button.
2Press the OK button to project the image in full screen.
 To return to the USB file browser, press the OK button.

113Projecting Data on USB Flash Memory
Projecting an Image from a Digital Camera or an USB Flash Memory
Operating the Projected Image
When images are projected, you can perform the following operations.
■Switching to the Previous/Next Image
If multiple image files are saved in a folder, you can switch to the previous/next image by 
pressing [ ] / [ ].
■Rotating an Image
You can rotate the image by 90 degrees to the left or to the right by pressing [].
 Even if a slideshow is running, you can rotate the...

Projecting Data on USB Flash Memory
114
Running a Slideshow of Data saved in a USB Flash 
Memory
You can run a slideshow that projects multiple images stored in a USB flash memory at 
certain intervals.
■Creating an Image File Folder
In the slideshow, image files in a folder are displayed in the alphabetical order of file 
name. Therefore, create a folder in the USB flash memory and save the image files to be 
projected in the slideshow in advance.
To start a slideshow, select and project the first image...

115
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory
Connecting the Projector to Network
Appendix
Index
Connecting the 
Projector to 
Network 

116
Setting an IP Address
It is possible to send an error notification e-mail (P119) from the projector to the computer 
when you connect the projector to the network.
To connect via the network, an IP address must be assigned to the projector. Set an IP address 
by following the steps below. (The examples shown are Windows XP screenshot images.)
■Setting IP Address
1Connect the projector and a computer directly via a cross type LAN cable.
2Turn on the power of the projector and computer.
3Open [Control...

117Setting an IP Address
Operating the Projector over Network
■If You Want to Reset the IP Address Setting
1Turn off the projector, and remove the LAN cable.
2Follow the steps 3 to 6 to restore the computers IP address and subnet mask that you 
have written down to the original values.
■Setting Network
1Launch a web browser, enter http://192.168.254.254 in the address, and click the 
[OK] button.
The login dialog box appears.
2In the password setting screen, enter root for [User name] and system for...

Setting an IP Address
118
4Click [TCP/IP] from the menu, enter IP address, Subnet mask and Default gateway to 
be assigned for the projector, and click the [OK] button.
[IP address]:  IP address of projector
[Subnet mask]:  Subnet mask of projector
[Default gateway]:  Default gateway of network
5Click [Mail] from the menu, enter information in the following fields, and click the [OK] 
button.
[To:]:  E-mail address to which error notification message is sent.
[Cc:]:  Second E-mail address to which error...

119Setting an IP Address
Operating the Projector over Network
6Click [Apply] in the menu.  When Save and apply settings. OK? message appears, 
click the [OK] button.
This completes the IP address setting of the projector.
■If You Want to Reset the Network Setting
1Access to the projector from web browser by performing the step 1 on “Setting Net-
work (P117).”
2Click [Initialize] in the network setting page.
3Click the [OK] button when “Initialize network settings?” message appears.
 To restore the...

120