Canon scanner imageFORMULA DRM160II User Manual

71
AWhen you want to specify different scanning conditions for the front 
and back pages of a document, select [Skip Blank Page] or [Both] 
for [Scanning Side] on the [Basic] tab in advance.
BSpecify the number of scanning conditions to apply in [Stream 
count of Front]. Up to three can be specified.
CSelect [Front 1st], and then open the other tabs and set the 
scanning conditions. Depending on the value specified for [Stream 
count of Front], configure the remaining [Front 2nd] and [Front 3rd] 
in the...

72
When you want to remove dots and notches that appear 
in documents
You can remove dots and notches protruding from object outlines that 
appear in documents from scanned images.
 Select the [Erase Dot] check box to automatically remove isolated 
black dots (3 x 3 dot size) from white backgrounds (or white dots 
from black backgrounds).
 Select the [Erase Notch] check box to remove notches that protrude 
from object outlines in scanned images.Click [Image processing] and select [ON] for [Erase Dot] or...

73
When you want to save a scanner driver setting
When you finish configuring a setting, click the [Save] button of [User 
Preference] to save the setting.
The saved setting is registered to the list. You can delete a setting 
from the list with the [Delete] button, and save or load a configuration 
file with the [Back Up] or [Restore] button.
When you finish configuring a setting, select [Add/Delete] of [Favorite 
Settings] to save the setting.
Clicking the [Add] button registers the current setting to...

74
Function Restrictions Depending on Color Mode Setting
Some of the setting items in each of the driver tabs are disabled as follows depending on the setting for [Color Mode] on the [Basic] tab.
[Brightness] tab
(O: Available for setting, X: Not available for setting)[Others] Tab
(O: Available for setting, X: Not available for setting)
[Image processing] tab
(O: Available for setting, X: Not available for setting)
1)Not available for setting if all of the following conditions in the [Auto Image Type...

75
2)Not available for setting if either one of the following two conditions are met.
 [Detection mode] in the [Auto Image Type Detection Settings] dialog box is set to [Color or Gray]
 [Mode in case of binary] in the [Settings for in case of binary] tab is set to [Error Diffusion]
3)Not available for setting if [Detection mode] is set to [Color or Gray] in the [Auto Image Type Detection Settings] dialog box.
Some of the setting items are disabled as follows depending on the setting for [Color Mode] in...

76
Advanced mode (Image processing dialog)
O: Available for setting X: Not available for setting
1) Cannot be set if the [Detect automatically] setting matches the conditions below
 [Detection Mode] is not set to [Color or Gray]
Setting valueEdge 
emphasisBackground 
smoothingCharacter 
EmphasisPrevent Bleed 
Through /
Remove 
BackgroundColor 
drop-outErase DotErase 
Notch
Detect automatically
O
1)O1)XXXXX
Black and White O X O O O O O
Error Diffusion O X O O O O O
Advanced Text Enhancement II
XXO
XO
OO...

77
More Advanced Scanning Methods (Batch Separation)
Batch Separation (Insert blank page)
Recognizes blank pages as batch separators and performs batch 
separation (automatic file separation) when documents containing 
blank pages are scanned.
On the [Others] tab of the ISIS driver properties, select [Blank Page] 
from the Batch Separation dropdown list.
IMPORTANT
 When [Simplex] is selected in [Scanning Side], blank pages on the 
scanned side will be recognized as separators. When [Duplex], 
[Skip blank...

78
1Print patchcode with a printer.
Click [Start] – [All Programs] – [Canon DR-M160] and then select 
[Patchcode] from the menu.
Patchcodes can be printed in A4 and letter (LTR) sizes. Open the 
application and print a patchcode that is the same size as the 
document to be scanned.
Hint
In Windows 8.1/8, it is registered at the following location.
IMPORTANT
 Patchcodes must be printed in their normal size. If patchcodes 
are enlarged or reduced, they may not be recognized correctly.
 When copying...

79
2Place the documents in the scanner after inserting the 
patchcode sheet in front of the page that separates the 
files.3In an application, specify a patchcode as a type of batch 
separation.
When using CapturePerfect, select [Patchcode] in the [Batch 
Separator] settings.
When using other ISIS-compatible applications, open the scanner 
driver settings screen and select [Patchcode] in [Batch 
Separation] on the [Others] tab.
Insert the patchcode sheets at 
the beginning of documents to 
change file...

80
Maintenance
Daily Maintenance
Clean the scanner on a regular basis, as described below, to maintain 
peak scanning quality.
CAUTION
 When cleaning the scanner and the inside of the scanner, turn OFF 
the power switch and disconnect the power cord from the power 
outlet.
 Do not use spray cleaners to clean the scanner. Precision 
mechanisms, such as the light source, may get wet, and cause a 
malfunction.
 Never use paint thinner, alcohol, or other organic solvents to clean 
the scanner. The exterior...