Canon scanner imageFORMULA DRM160II User Manual

41
3Set the scan method in the top screen.
ASpecify whether to enable continuous scanning. When 
scanning multiple documents as one scanned image or 
splitting up a large document to scan in parts, select [ON] to 
enable continuous scanning.
BSpecify whether to scan the document in full auto mode. When 
you want to specify arbitrary scanning conditions, select [OFF] 
and configure the scanner settings. (See p. 45)
4Click the Start button.
The document is scanned. While scanning is in progress, the...

42
5Configure the settings related to output and then output 
the scanned images.
 
AConfigure the settings related to output. (See p. 49)
BClick this button to output the scanned images. The button 
name differs for each output method. For example, it is [Save] 
when the output method is set to [Save to folder].
When output is finished, the complete screen appears. Scan First 
is now finished.
Hint
 Clicking [Return to top] returns to the main screen of Scan First.
 When output methods apart from...

43
2Enter the job name, and press the Enter key.
Hint
Job numbers up to 9 are added (in numerical order) to the end of 
the set job name. By specifying the job number with the operating 
panel, you can start scanning after pressing the operating panel 
button. (See p. 45)
3Specify the output method of the job. (See p. 49)
4Click [Output settings], and configure the output settings.
The output setting items differ depending on the specified output 
method. For details on the setting items, see the Help of...

44
Hint
 If you set [Enable continuous scanning] to [ON], you can 
continue to scan additional documents after all the pages of the 
initial document are scanned.
 If you set [Check output after scanning] to [ON], you can check 
the output settings after scanning.
3Click the Start button.
The document is scanned. While scanning is in progress, the 
number of pages scanned is displayed in addition to the scanner 
settings.
When all the pages of the document are scanned, the scanned 
images are output...

45
Operating the scanner with the 
operating panel buttons
You can start scanning by selecting a job from the scanner’s operating 
panel.
1Set a job number every time a job is registered with 
CaptureOnTouch.
2Place the document in the scanner.
3Press the Job Select button in the operating panel to 
display the required job number in the Job No. Indicator. 
The job numbers of jobs displayed in the operating panel are 
allocated as follows.
4Press the Start button in the operating panel.
CaptureOnTouch is...

46
Setting Basic Items
Scanner settings include the basic items that are configured in 
[Scanner Setting], and the setting items that are configured in the 
advanced settings dialog box. The settings in the advanced settings 
dialog box are applied for settings other than the basic items.
The settings in the driver settings dialog box are applied for any other 
settings.
Color mode
Select from the following modes for scanning documents.
Detect  automatically Automatically determines the color mode based...

47
For details on the setting items, see the Help of the driver settings 
dialog box.
Hint
The driver settings dialog box includes setting items that are the 
same as the basic items in [Scanner Settings], but the setting for 
each of the them is stored separately. Which settings are used during 
scanning differs as follows depending on the setting of the [Use 
advanced settings dialog box] check box.
Setting of [Use 
advanced settings 
dialog box]Basic itemsOther than basic 
items
OFFSettings of...

48
Operation in Continuous Scanning 
Screen
If a document is scanned with either Scan First or Select Scan Job 
when [Enable continuous scanning] is set to [ON] in the Start screen, 
the Continuous Scanning screen appears when all of the pages of the 
placed document have been fed. You can confirm the scanned 
images and then continue scanning.
AThumbnail Display Area
Displays the thumbnail images of the scanned document. The 
following operations are possible.
Click a thumbnail image to display a...

49
Setting the Output Method
CaptureOnTouch is provided with various output methods for 
processing scanned images.
The output method specification is common to Scan First and Select 
Scan Job.
Scan First:
For Scan First, select an output method in the output method selection 
screen which appears after scanning, and then specify each of the 
output method items.
Select Scan Job:
For Select Scan Job, specify the output method separately for each 
job.
The setting items related to output differ depending...

50
Other Output Methods
In an environment in which Microsoft SharePoint Server has been 
introduced, you can send scanned images to a Microsoft SharePoint 
site. To do so, select [Save in Microsoft SharePoint] as the output 
method, and configure the setting for the image files to be sent.
You must also open the advanced settings dialog box and configure 
settings such as the URL of the Microsoft SharePoint site, account 
information, and the save destination folder. For details on settings, 
see the...