Canon scanner imageFORMULA DR6010C User Manual

Chapter 3  Basic Operation
3-21 Note
If Feeding Option in the scan settings is set to “Panel-Feeding” or “Automatic Feeding,” the 
scan panel will appear when you start scanning. (See “Scan Panel,” on p. 3-21.)
8When there are no more pages of the document to scan, scanning stops. Scanning resumes 
or ends according to the Feeding Option setting in the scanner setup. 
 Feeding Option is set to “Standard Feeding”: 
The Continue dialog box is displayed. Place the next document, and click [Continue...

Chapter 3  Basic Operation
3-22
Scan Panel Functions
The Scan Panel has the following functions.
a Start button
If Feeding Option is set to “Panel-Feeding,” clicking this button starts scanning.
b Stop button
Stops scanning.
c Job display
When the Start and Stop functions are assigned to the job buttons, [Start] and [Stop] are shown 
here.
Note
If nothing is shown on the job display, the Start and Stop functions are not assigned to the job 
buttons. In this case, you should use the Start and Stop buttons...

Chapter 3  Basic Operation
3-23
3-6 Using Patchcode Sheets
The DR-6010C ISIS driver and CapturePerfect 3.1 both support the automatic file separation 
function with patchcode sheets.
Patchcode patterns are printed on patchcode sheets, which are used to automatically separate files. 
When the scanner recognizes a patchcode sheet during scanning, the files are automatically 
separated at the patchcode sheet or at the image data of the next document.
Note
 The TWAIN driver does not support batch...

Chapter 3  Basic Operation
3-24
Patchcode Pattern Function
There are two types of patchcodes and their function changes according to their pattern.
■PATCH T (FILE A)
„PATCH II (FILE B)
How to Use Patchcode Sheets
1Print patchcode sheets on a printer. Print the patchcode sheets at their original size on paper 
that is the same size as the image data.
Note
 Print [PATCH II (A4)] and [PATCH T (A4)] on A4 paper.
 Print [PATCH II (LTR)] and [PATCH T (LTR)] on LTR paper.
IMPORTANT
To copy a patchcode pattern...

Chapter 3  Basic Operation
3-25
3On the [Other] tab of the ISIS driver properties, set the batch separation setting to 
“Patchcode.”
4Perform scanning from the application.
Note
If the application offers a batch separation setting, change this setting to enable batch 
separation.
IMPORTANT
Make sure to keep the patchcode sheets clean. In particular, the effective area for detecting 
patterns should be kept clean. Also, do not fold them or allow them to become creased. If this 
happens, the scanner will...

Chapter 3  Basic Operation
3-26
3-7 Clearing a Paper Jam
When paper jams occur during scanning, use the following procedure to clear them.
CAUTION
When removing jammed paper, take care not to cut your hands on the edges of the 
paper.
1Remove any documents that have been left in the eject tray, and close the eject tray guide.
IMPORTANT
If a document stops in the eject tray, remove the document before closing the document eject 
tray extension. Attempting to force the document eject tray extension closed...

Chapter 3  Basic Operation
3-27
3Remove the jammed document.
■If the jam occurred in the feed section
■If the jam occurred in the eject section
IMPORTANT
Make sure to pull the document out carefully, without applying too much force.
If jammed paper tears while it is being removed, make sure to remove any remaining pieces 
from inside the scanner.
4Close the upper unit slowly. Make sure that the upper unit is completely closed by pushing on 
both edges with both hands until you hear a click.
CAUTION
When...

Chapter 3  Basic Operation
3-28
 If a paper jam occurs when “Rapid recover system” is enabled in the ISIS/TWAIN driver 
settings, the image data of the document is not saved and scanning stops. This allows you 
to continue scanning from the document that caused the paper jam after the paper jam is 
fixed.  

Chapter 3  Basic Operation
3-29
3-8 Other Functions
This scanner also supports the scanning functions described below.
 Folio Scan 
Documents larger than A4 (up to A3) can be scanned by folding them first.
Double Feed Detection Function 
The scanner will detect a double feed and stop scanning.
Long Document Mode 
Allows scanning of documents up to 118.1” (3,000 mm) in length.
MultiStream Function 
Two types of images are output from a single scanning pass.
Folio Scan
This function supports the scanning...

Chapter 3  Basic Operation
3-30
Double Feed Detection Function
The scanner is equipped with a [Double Feed Detection] function that automatically detects when 
two or more pages are fed at the same time (double feed) while scanning continuously.
There are two methods for multiple feed detection. The detection method is selected by the ISIS/
TWAIN driver.
Detecting Double Feed by Document Length
This detection method is effective when scanning a document on pages that are all of the same 
size. The length...