Canon scanner CanoScan FB 1200S User Manual
Have a look at the manual Canon scanner CanoScan FB 1200S User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 3. Attach the ADF connector cable to the ADF connector on the option cables connector block. aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 4. Attach the power cord to the option cable AC adapter. ADF Connector Cable Option Cable AC Adapter Power Cord
62 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 5. Plug the power cord into an electrical outlet. aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 6. Plug the scanners power cord into an electrical outlet. ADFScanner
63 Loading Documents Observe the following precautions when loading documents into the ADF. WARNING¥ The maximum stack of documents that can be loaded into the ADF at one time is indicated by the stack mark on the inner side of the paper guide. The ADF can accommodate up to 20 sheets of standard copy paper or a stack of documents no higher than 2 mm. Loading stacks higher than this may result in paper jams. ¥ Uncurl or straighten any documents that are curled or wrinkled. aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 1. Place documents face up on the document tray. 2 mm Stack Mark
64 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 2. Push the left edge of the document stack flush against the paper guide and as far under the ADF cover as possible. ¥ If the document is a standard size, align its top corner with the corresponding paper alignment mark on the document tray. aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 3. Slide the movable paper guide lightly against the side of the stack. ¥ Shift the movable paper guide snugly up against the stack, but not so tightly that it crimps the stack. Movable Paper Guide Paper Alignment Mark
65 No tears No punched holesNo staples or paperclips Acceptable Media The ADF can feed media falling within the following parameters. ¥ Standard paper sizes: B5, A4, Letter, Legal Width: 182-216 mm (7.2-8.5 in.) / Length: 257-356 mm (10.1-14.0 in) ¥ Standard paper weights: 60-105 g/m 2 (16-28 lb.) The following can cause paper jams and should be avoided. ¥ papers with weights higher or lower than the range given above ¥ non-rectangular media with irregular shapes ¥ specialty paper for color printers, glossy papers or papers with special coatings ¥ ripped, perforated or punched paper ¥ curled or wrinkled paper (See the warning on the next page for the allowable curl) ¥ papers joined with staples or paperclips (smoothen the papers after removing any fasteners) ¥ papers with carbon paper attached ¥ coarse or fibrous papers ¥ overhead projector (OHP) or other transparencies ¥ adhesive labels or postcards ¥ papers to which tape or glue has added to the thickness ¥ color photocopier papers impregnated with oil
66 5 mm30 ˚ ABC WARNING¥ Scan valuable or single-copy documents using the document glass, not the ADF, to avoid the risk of damaging the original in a paper jam. ¥ The allowable curl on papers fed by the ADF is shown below. Do not use the ADF for papers with curls exceeding 30û. To scan photographs, books and papers not suited for the ADF, lift up the ADF on its hinges, position the item directly on the document glass and close the ADF. Then initiate the scan. a a a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 4. Close the ADF cover.
67 Software Settings Follow the procedures below to set the software to scan documents loaded into the ADF. The settings may differ between software programs. NOTE¥ The ADF can be used to scan at resolutions up to 600 dpi. aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 1. Start ScanGear CS-S. ¥ For instructions, see the Getting Started guide (p. 29). aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 2. Click the [FB1200S] tab. Windows
68 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 3. Click the arrow of the [Image Source] list box and select [Document Feeder]. This is all that is required to set the scanner to choose the ADF as the document source. aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 4. Load documents into the ADF and click the [Preview] button. The first document will feed into the scanner and the preview image will begin to appear in the ScanGear CS-S window. ¥ The final scan is initiated in a later step. For instructions, see the Getting Started guide (p. 32) or the ScanGear CS-S Users Guide.
69 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 1. Start Plug-in Module CS-S. ¥ For instructions, see the Getting Started guide (p. 41). aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 2. Open the [Preferences] menu and select [Auto document feeder]. This is all that is required to set the scanner to choose the ADF as the document source. aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 3. Load documents into the ADF and click the [Preview] button. The first document will feed into the scanner and the preview image will begin to appear in the Plug-in Module CS-S window. ¥ The final scan is initiated in a later step. For instructions, see the Getting Started guide (p. 43) or the Plug-in Module CS-S Users Guide. Macintosh
70 Paper Jams Use the following procedures to clear paper jams where they occur in the ADF. Jams in the Document Tray 1. Lift the ADF cover. 2. Remove the jammed document by pulling it forward.