Canon scanner CanoScan FB 1200S User Manual

71
Jams during Document Ejection
1. Lift the ADF cover.
2. Lift the document tray.
3. Remove the jammed document by pulling it forward. 

72
Jams Inside the ADF
1. Lift the ADF cover.
2. Raise the ADF unit on its hinges.
3., 4. Open the delivery guide sheet cover.
5. Remove the delivery guide sheet.
6. Remove the jammed document by pulling it forward.
Press the lock clips on both sides
inward (3) and pull forward (4). 

73
After Clearing a Paper Jam
Return the delivery guide sheet, ADF unit, document tray and ADF cover to their original positions after
clearing a paper jam.
WARNING¥ Refer to ÒReplacing the Delivery Guide SheetÓ (p. 79) for instructions to remove the
delivery guide sheet.
¥ Be careful not to damage or dirty the delivery guide sheet. Either condition may cause
lines to appear on scanned images or reduce image quality in other ways.
¥ Replace the separator in the ADF if jams or misfeeds occur too...

74
Problems with Scanned Images
Streaked or unclear images may result if the transparent delivery guide sheet, which is located in the
image scanning field, or the white calibration plate beneath it, are dirty or damaged.
Follow the procedures below to clean or replace them.
Cleaning the Delivery Guide Sheet
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
1. Unplug the scanner and ADF power cords from the electrical outlet.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
2. Lift up the ADF on its...

75
WARNING¥ Do not apply pressure to the delivery guide sheet. It is easily damaged.
¥ Never use alcohol, thinners or benzene to clean the equipment. They may distort, discolor
or dissolve the delivery guide sheet or white calibration plate.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
4. Open the delivery guide sheet cover.
¥ To open the cover, press the lock clips on both sides inward (1) and pull forward on the
cover (2).
Press inward on the lock clips
and pull forward. 

76
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
5. Lift out the delivery guide sheet and lightly wipe both the interior of the
ADF and the inner side of the delivery guide sheet with a soft, dry cloth.
WARNING¥ Do not apply pressure to the surfaces. They are easily damaged.
¥ Never use alcohol, thinners or benzene to clean the equipment. They may distort, discolor
or dissolve the delivery guide sheet.
¥ Replace the delivery guide sheet if it is stained or damaged (p. 79).
ADF Interior
Inner Side of...

77
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
6. Return the delivery guide sheet to its original position.
¥ Align the two holes in the delivery guide sheet with the pegs on the back side of the
cover.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
7. Tuck the edge of the delivery guide sheet under the document cover.
¥ Gently lift up the edge of the document cover and insert the edge of the delivery guide
sheet under the flap.
WARNING¥ Do not forcefully lift the document cover. It may warp or...

78
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
8. Close the delivery guide sheet cover.
WARNING¥ Be extremely careful when closing the delivery guide sheet cover to keep the delivery
guide sheet from slipping off the pegs on the back side of the cover. 

79
Replacing the Delivery Guide Sheet
NOTE¥ Replacement delivery guide sheets can be obtained through Canon scanner vendors or
one of the service centers listed at the end of this guide.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
1. Lift up the ADF on its hinges.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
2. Open the delivery guide sheet cover.
¥ To open the cover, press the lock clips on both sides inward (1) and pull forward on the
cover (2).
Press inward on the lock clips
and pull forward. 

80
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
3. Lift out the delivery guide sheet.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
4. Insert the new delivery guide sheet.
¥ Align the two holes in the delivery guide sheet with the pegs on the flap of its cover.