Canon scanner CanoScan D660U User Manual

61 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index4.
Start ScanGear CS-U as a TWAIN driver.
The mothods for starting TWAIN drivers vary between application
programs. For example of PhotoStudio 2000, click the [File] menu and
select [Acquire]. See the respective manuals for other programs.
5.The ScanGear CS-U main window opens.
If the Advanced Mode main window appears, click the Simple Mode
button.
Note
If you see an image in the Preview Area this means one
of the preview settings has...

62 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index6.
Click the down-arrow for Image Type and select a setting from the
drop-down list. (
p.31)
Note
Your selection automatically sets the mode for the
scanning job.
7.Review the settings you see below the Image Type selection (Color
Mode, Resolution, Width, Height, Size, Paper Size). (
p.32-35)
If you are satisfied with these settings go on to the next step.
Note
•On the Simple Mode sheet you click one of the flat
buttons (the black...

63 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index8.
Click the Preview button to pre-scan the image and display it in the
Preview Area. 

64 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index9.
Click a button in the Toolbar (
p.27) to manipulate the image.
Note
You can click the Auto Tone button (
p.29) to have
ScanGear CS-U automatically adjust the color tones of
the scanned image. This is the only color adjustment
you can make in the Simple Mode. To perform more
detailed color adjustments, click the Advanced Mode
button then click the Tone tab to open the Tone
Sheet.(
p.41)
10.Specify the scanning area.
Point to one corner...

65 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index
Scanning in the Advanced Mode
This is a brief overview of the general procedure for previewing and
scanning an original in the Advanced Mode.
1.Place the original on the scanner.
Note
For details about positioning the original on the
scanner, see your scanner users manual.
2.Start the software application you are going to use.
3.Confirm that your scanner is selected in the Select Source (or its
equivalent) dialog box. (
p.60)
4.Start...

66 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index5.
The ScanGear CS-U main window opens.
If the Simple Mode main window appears, click the Advanced Mode
button.
Note
If you see an image in the Preview Area this means one
of the preview settings has been switched on with the
Preferences sheet. : Otherwise, the Preview Area is
empty.
6.In the Main sheet adjust the settings for the Color Mode, Output
Resolution, Selection (Scanning area), and Scale. 

67 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index7.
In the Scanner sheet, specify a variety of settings for operation of
the scanner. (
p.53)
8.Click the Preview button to pre-scan the image and display it in the
Preview Area.
9.Click a button in the Toolbar (
p.27) to manipulate the image. 

68 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index10.
Adjust the image quality with the tools and options provided on
the Tone (
p.41) or Halftone (
p.52) sheet.
11.Specify the scanning area.
Point to one corner of the area of the image that you want to scan.
Click the left mouse button and, while holding the mouse button
down, drag the mouse pointer to the opposite corner of the area
you want to scan. Release the mouse button.
The area will be boxed in by a rectangle.
12.After...

69 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index
Scanning Film
Use the following procedures to scan 35 mm film with the film adapter
unit built into the scanner.
Note
Please see the Getting Started guide supplied with the
scanner to learn how to set film on it.
1.Place the film in the film guide, set the loaded film guide on the
platen and close the document cover.
2.Select Film Adapter as the Image Source.
In Advanced mode, click the Scanner tab and select it.
The Preview area shape...

70 chapter 5
Scanning an
Original
Top  Page
Glossary
Contents
Index
3.Select the film type.
Select positive or negative, color or monochrome to match your film.
4.Click the Preview button.
The image is displayed in the preview area. Specify the scan area of the
preview image.
5.Set the color mode, resolution, magnification and color
adjustments as required.
6.Click the Scan button.
The image will be sent to the application started by ScanGear CS-U.
Simple ModeAdvanced Mode