Canon Projector WX 6000 User Manual
Have a look at the manual Canon Projector WX 6000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
Part Names
36
■RS-RC05
POWER button (P56, P80)
Turns the projector on or off.
IMAGE button (P79)
Switches the image mode (image quality).Pointer buttons (P90)
Selects the upper, lower, left or right item
in the menu. Performs remote control
channel settings when the remote control
is used via the infrared transmitter. (P124)
OK button (P92)
Determines the item selected from the menu.
ZOOM button (P71)
Adjusts the image size.
[ ] / [ ] buttons: Increase the image size.
[ ] / [ ] buttons: Decrease the...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-35.png "Page 36
Part Names
36
■RS-RC05
POWER button (P56, P80)
Turns the projector on or off.
IMAGE button (P79)
Switches the image mode (image quality).Pointer buttons (P90)
Selects the upper, lower, left or right item
in the menu. Performs remote control
channel settings when the remote control
is used via the infrared transmitter. (P124)
OK button (P92)
Determines the item selected from the menu.
ZOOM button (P71)
Adjusts the image size.
[ ] / [ ] buttons: Increase the image size.
[ ] / [ ] buttons: Decrease the...")
![Page 37
Part Names
37
Before Use
SHIFT button (P74)
Moves the lens up, down, left or right.
[] / [] / [] / []
buttons: Move the lens.
INPUT button ( P60)
Switches the input signal.
MENU button ( P89)
Displays the menu on the screen. Performs remote control channel settings
when the remote control is used via the infrared transmitter. (P127
)
VOL button (P83)
Adjusts the sound volume.
[3] button: Increases the volume.
[6] button: Decreases the volume.
BLANK button ( P82)
Toggles between displa y / non-display...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-36.png "Page 37
Part Names
37
Before Use
SHIFT button (P74)
Moves the lens up, down, left or right.
[] / [] / [] / []
buttons: Move the lens.
INPUT button ( P60)
Switches the input signal.
MENU button ( P89)
Displays the menu on the screen. Performs remote control channel settings
when the remote control is used via the infrared transmitter. (P127
)
VOL button (P83)
Adjusts the sound volume.
[3] button: Increases the volume.
[6] button: Decreases the volume.
BLANK button ( P82)
Toggles between displa y / non-display...")
![Page 38
Part Names
38
Side Control
(1) LED indicators (P39)
The projector status is shown by the LED indicators (off / on / flashing).
For indicator status, refer to page 39.
(2) POWER button (P56, P80)
Turns the projector on or off.
(3) MENU button (P88, P89)
Displays a menu on the screen.
(4) LENS button
Each time the button is pressed, the
screen changes to focus adjustment
(P73), zoom (image size) adjustment
(P71), or lens shift (image position)
adjustment (P74). To adjust, use the
[] / [] or the [] / []...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-37.png "Page 38
Part Names
38
Side Control
(1) LED indicators (P39)
The projector status is shown by the LED indicators (off / on / flashing).
For indicator status, refer to page 39.
(2) POWER button (P56, P80)
Turns the projector on or off.
(3) MENU button (P88, P89)
Displays a menu on the screen.
(4) LENS button
Each time the button is pressed, the
screen changes to focus adjustment
(P73), zoom (image size) adjustment
(P71), or lens shift (image position)
adjustment (P74). To adjust, use the
[] / [] or the [] / []...")
![Page 39
39
Part Names
Before Use
■LED Indicator Displays
The LED indicators flash or illuminate to indicate the operating status of the projector.
* Either the [POWER ON] or [STAND BY] indicator illuminates, depending on the power
status.
: Off : Lit : Flashing
LED indicator
Operating status POWER
ON
(green)
STAND BY
(red)WARN-
ING (red)LAMP
(orange)TEMP
(red)
Power is not connected.
Ready to turn power on (standby).
Power is on.
Power-saving mode engaged.
* *The time for replacing the lamp is near....](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-38.png "Page 39
39
Part Names
Before Use
■LED Indicator Displays
The LED indicators flash or illuminate to indicate the operating status of the projector.
* Either the [POWER ON] or [STAND BY] indicator illuminates, depending on the power
status.
: Off : Lit : Flashing
LED indicator
Operating status POWER
ON
(green)
STAND BY
(red)WARN-
ING (red)LAMP
(orange)TEMP
(red)
Power is not connected.
Ready to turn power on (standby).
Power is on.
Power-saving mode engaged.
* *The time for replacing the lamp is near....")
41 Part Names Before Use (1)LAN port (P166) Connects the LAN cable. Used to connect the projector to a network. (2)ANALOG PC-1 / COMPONENT IN terminal ( /COMPONENT IN) (P47, P53) Receives the analog PC signal (Analog PC-1). A component cable can be used to receive the component image signal (Component). (3)ANALOG PC- 2 / DVI-I IN terminal ( DVI-I IN) (P50) Connects the external monitor output from a computer. Receives the digital PC signal (Digital PC) or analog PC signal (Analog PC-2). (4)HDMI IN terminal (HDMI IN) (P51) Receives the digital content image signal (HDMI). Carries both video and audio signals across a single cable. (5)Service port (CONTROL) This terminal is used by servicing technicians. It is not used during ordinary use. (6)Terminal for wired remote control (REMOTE) (P30) This terminal is used to connect the remote control using a cable. (7)AUDIO IN terminal (AUDIO IN) (P47, P50, P53) Receives the audio signal input for 2 kinds of image input except HDMI IN. The internal speaker outputs the audio for the selected image signal. (8)AUDIO OUT terminal ( AUDIO OUT) (P51, P55) Outputs the audio to external AV equipment. This outputs the audio signal that corre- sponds to the projected image signal. (1) (2) (3) (4) (5) (6) (7) (8)
Safety Instructions Before Use Table of Contents Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus User’s Manual Installation Connecting to a Network Maintenance Appendix Index Appendix Installation Manual 45 Projecting an Image
46 Steps for Connecting the Projector and Projecting an Image Connecting the Projector to Equipment (P162) Starting Projection (P56) Selecting an Input Signal (P59) Adjusting the Image (P61) Make the following adjustments. Setting the Display Resolution of the Computer (P61) Selecting an Aspect Ratio of Projected Image (Screen aspect) and a Screen Mode (Aspect) (P63, P69) Adjusting Misaligned Images or Flickering of the Screen Using the Auto PC (P62) Adjusting the Image Size (P71) Adjusting the Focus (P73) Adjusting the Image Position (Lens shift) (P74) Adjusting Keystone Distortion (P76) Making Fine Adjustments Selecting an Image Mode (P78) Do you want to project an image from a notebook computer? Is the image projected properly? No For a notebook computer, turn on the monitor output (P58) and then proceed. NoYes Projection is complete.Yes Installation work should be performed by a qualified technician. Contact the Canon Customer Support Center for further information.
47 User’s ManualProjectin g an Ima ge Connecting the Projector Connecting the Projector to a Computer Connect the projector to the computer. A digital connection (P50) is recommended when projecting an image in high quality. When using a computer with an HDMI output terminal, a digital connection (P51) can be made using an HDMI cable. ■Connecting to RGB Monitor Output Terminal (Analog Connection) Connecting with a VGA cable (Input signal type: [Analog PC] (WUX5000 / WUX4000), [Analog PC-1] (WX6000 / SX6000) P59) Before connecting the cables, turn off both the projector and computer. Computer Monitor output terminal (mini D-sub 15-pin) AUDIO output terminal (AUDIO OUT) VGA cable (supplied) When inputting corresponding audio Audio cable (not included)To ANALOG PC / COMPONENT IN terminal To AUDIO IN terminalProjector
Connecting the Projector 48 Connecting with VGA-DVI cable (Input signal type: [Analog PC-2] P59) Use a VGA cable in which all pins are connected. If the cable is a type in which all pins are not connected, the image may not be correctly displayed. Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will reduce the audio volume. The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139). (WX6000 / SX6000) Computer Monitor output terminal (mini D-sub 15-pin) AUDIO output terminal (AUDIO OUT) VGA cable (supplied) When inputting corresponding audio Audio cable (not included)To ANALOG PC-1 / COMPONENT IN terminal To AUDIO IN terminalProjector Computer Monitor output terminal (mini D-sub 15-pin) AUDIO output terminal (AUDIO OUT) VGA-DVI-I cable (not included) When inputting corresponding audio Audio cable (not included)To ANALOG PC-2 / DVI-I IN terminal To AUDIO IN terminalProjector
49 Connecting the Projector User’s ManualProjectin g an Ima ge Connecting with a BNC cable (Input signal type: [Analog PC] (WUX5000 / WUX4000), [Analog PC-1] (WX6000 / SX6000) P59) A signal with a dot clock higher than 162 MHz cannot be projected. Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will reduce the audio volume. The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139). (WX6000 / SX6000) Computer Monitor output terminal (mini D-sub 15-pin) AUDIO output terminal (AUDIO OUT) BNC cable (not included) When inputting corresponding audio Audio cable (not included)To ANALOG PC / COMPONENT IN terminal To AUDIO IN terminal Projector Mini D-sub 15-pin - BNC terminal con- verter cable (not included)Mini D-sub 15-pin - BNC terminal con- verter cable (not included) Computer Monitor output terminal (mini D-sub 15-pin) AUDIO output terminal (AUDIO OUT) BNC cable (not included) When inputting corresponding audio Audio cable (not included)To ANALOG PC-1 / COMPONENT IN terminal To AUDIO IN terminal Projector Mini D-sub 15-pin - BNC terminal con- verter cable (not included)Mini D-sub 15-pin - BNC terminal con- verter cable (not included)
Connecting the Projector 50 ■Connecting to DVI Monitor Output Terminal (Digital Connection) Connecting with a DVI cable (Input signal type: [DVI-D] (Digital PC) – P59) Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will reduce the audio volume. The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139). (WX6000 / SX6000) Computer Monitor output terminal (DVI terminal) AUDIO output terminal (AUDIO OUT) DVI-D cable (not included) When inputting corresponding sound Audio cable (not included)To DVI-D IN terminal To AUDIO IN terminal Projector Computer Monitor output terminal (DVI terminal) AUDIO output terminal (AUDIO OUT) DVI-I cable (not included) When inputting corresponding audio Audio cable (not included)To Analog PC-2 / DVI-I IN terminal To AUDIO IN terminal Projector