Canon Projector WX 6000 User Manual

							31
Before Use
Part Names
Main Unit (The illustration shows WUX5000.)
■Front Side
Terminals 
and con-
nectorsInfrared remote receiver (P29) Lens unit
Air intake vent Power cord connector (P56)
Side control (P38)
Air filter (P193)
Anti-theft lock hole
An anti-theft wire cable (not included) can be 
connected.
Do not block the air intake.
Doing so may cause a malfunc-
tion. 
						

							Part Names
32
■Rear Side
■Bottom Side
Exhaust vent
Infrared remote receiver (P29)
Do not block the air exhaust.
Doing so may cause a malfunc-
tion.
Lamp cover
Adjustable feet (P150)Screw holes for installation of ceiling 
attachment 
						

							33
Part Names
Before Use
Mounting the Projector on the Ceiling
You can mount the projector on the ceiling. 
The ceiling attachment (part No.: RS-CL11)
is required in order to mount the projector on
the ceiling. Depending on the installation
environment, an extension pipe (part No.:
RS-CL08 or RS-CL09) may also be required.
Contact the Canon Customer Support Center
for more detailed information.
If you mount the projector on the ceil-
ing, you have to invert the projected
image by selecting [Image flip H/V]
from the menu. (P104)
• Make sure to use the optional ceil-
ing attachment.
• You should never install the ceiling
attachment by yourself. 
						

							Part Names
34
Remote Control
The projector can be operated using buttons on the remote control or the side control on 
the main unit. The RS-RC04 remote control is included with WUX5000 / WUX4000 and the 
RS-RC05 remote control is included with WX6000 / SX6000.
The remote control allows you to operate all functions of the projector.
■RS-RC04
POWER button (P56, P80)
Turns the projector on or off.
FOCUS button (P73)
Adjusts focusing.
[ ] / [ ] buttons: Moves the focus posi-
tion farther away.
[ ] / [ ] buttons: Moves the focus posi-
tion nearer.
ASPECT button (P70)
Changes the aspect ratio mode.
D.SHIFT/KEYSTONE button (P76)
Corrects keystone distortion.
[ ], [ ], [ ] / [ ] buttons: For keystone 
adjustment.
Press D.SHIFT/KEYSTONE to correct 
keystone distortion.
 Moves the image up, down, left, or right 
when the screen aspect setting is [16:9 
D. image shift] or [4:3 D. image shift] is 
selected. (P67, P68)
 To move the image, use the [ ] / [ ] or 
the [ ] / [ ] buttons.
D. ZOOM button (P84)
Zooms the image in or out digitally.
[+] button: Zooms the image in (up to 12x).
[+] button: Zooms the image out (1x mini-
mum).
[], [], [] / [] 
buttons: Move the zoom-
in location.
FREEZE button (P82)
Freezes the projected image.
IMAGE button (P79)
Switches the image mode (image quality).– 
						

							Part Names
35
Before Use
LENS-SHIFT button (P74)
Moves the lens up, down, left, or right.
[], [], [] / [] buttons: Move the lens.
INPUT button (P60)
Switches the input signal.
ZOOM button (P71)
Adjusts the image size.
[ ] / [ ] buttons: Increase the image size.
[ ] / [ ] buttons: Decrease the image size.
Pointer buttons (P90)
Selects the upper, lower, left or right item in the menu 
and performs remote control channel settings. (P127)
MENU button (P88)
Displays the menu on the screen and performs remote control 
channel settings.
VOL button (P83)
Adjusts the sound volume.
[+] button: Increases the volume.
[+] button: Decreases the volume.
BLANK button (P82)
Toggles between display / non-display of image.P-TIMER button (P85)
Displays the time elapsed since this 
button was pressed. AUTO PC button (P62)
Adjusts tracking etc. automatically in accordance with the signal from 
a computer when the analog PC input is selected.
OK button (P92)Confirms the item selected from the menu.
MUTE button (P83)
Mutes the sound.
LAMP button (WUX4000) (P119)
Toggles the lamp mode between Standard 
and Silent. GAMMA button (P113)
Adjusts the gamma of the image.
[ ] button: Corrects dark parts of the image so that they are easier to see.
[ ] button: Corrects bright parts of the image so that they are easier to see.
– 
						

							Part Names
36
■RS-RC05
POWER button (P56, P80)
Turns the projector on or off.
IMAGE button (P79)
Switches the image mode (image quality).Pointer buttons (P90)
Selects the upper, lower, left or right item 
in the menu. Performs remote control 
channel settings when the remote control 
is used via the infrared transmitter. (P124)
OK button (P92)
Determines the item selected from the menu.
ZOOM button (P71)
Adjusts the image size.
[ ] / [ ] buttons: Increase the image size.
[ ] / [ ] buttons: Decrease the image size.
FOCUS button (P73)
Adjusts focusing.
[ ] / [ ] buttons: Moves the focus position further away.
[ ] / [ ] buttons: Moves the focus position nearer.
ASPECT button (P70)
Changes the aspect ratio mode.
Ch button (P124)
Changes the remote control channel when 
the remote control is used via the infrared 
transmitter. D.ZOOM button (P84)
Zooms the image in or out digitally.
[1] button: Zooms the image in (up to 12x).
[4] button: Zooms the image out (1x minimum).
[ ] / [ ] / [ ] / [ ] buttons: Move the zoom-in 
location.
TEST PATTERN button (P138, P217)
Displays the test pattern. 
						

							Part Names
37
Before Use
SHIFT button (P74)
Moves the lens up, down, left or right.
[] / [] / [] / [] 
buttons: Move the lens.
INPUT button ( P60)
Switches the input signal.
MENU button ( P89)
Displays the menu on the screen. Performs remote control channel settings 
when the remote control is used  via the infrared transmitter. (P127
)
VOL button (P83)
Adjusts the sound volume.
[3] button: Increases the volume.
[6] button: Decreases the volume.
BLANK button ( P82)
Toggles between displa y / non-display of 
the image.
AUTO PC button (
P62)
Adjusts tracking etc. autom atically in accordance with the signal from a com-
puter when the analog PC input is selected.
EXIT button (P92)
Cancels functions such as menu 
display or test pattern during oper-
ation and returns to the image dis-
play.
MUTE button ( P83)
Mutes the sound.
Change input buttons (
P60)
Change the input signal between Digital 
PC, Analog PC-1, Analog PC-2, HDMI 
and Component.
KEYSTONE button ( P76)
Corrects keystone distortion.
To move the image, use the [ ] / [ ] or [ ] / [ ] buttons.
Fn button
Cannot be used on this 
product.
FREEZE button ( P82)
Freezes the projected image.
Numerical buttons (
P129, P173 , P175)
Enter password and TCP/IP setting values.
Terminal for wired remote control ( P30)
Connects a cable to the projector for remote control operation. 
						

							Part Names
38
Side Control
(1) LED indicators (P39)
The projector status is shown by the LED indicators (off / on / flashing).
For indicator status, refer to page 39.
(2) POWER button (P56, P80)
Turns the projector on or off.
(3) MENU button (P88, P89)
Displays a menu on the screen.
(4) LENS button
Each time the button is pressed, the
screen changes to focus adjustment
(P73), zoom (image size) adjustment
(P71), or lens shift (image position)
adjustment (P74). To adjust, use the
[] / [] or the [] / [] buttons.(5) INPUT button (P60)
Switches the input signal.
(6) Pointer / VOL buttons (P90)
Adjust the sound volume.
[ ] button: Decreases the volume.
[ ] button: Increases the volume.
Selects the upper, lower, left or right
item in the menu.
(7) OK button (P92)
Determines the item selected from the
menu.
 POWER ON (green): Lights up or flashes when the power is on.
 STAND BY (red) : Lights up or flashes during standby or when the projector is 
shut down.
 WARNING (red) : Lights up or flashes when an error occurs.
 LAMP (orange) : Flashes when the time for replacing the lamp is near. When a 
lamp cover error occurs, the [WARNING] indicator will also 
flash. When a lamp error occurs, it will illuminate at the same 
time as the [WARNING] indicator.
 TEMP (red) : When the temperature inside the projector is high, it will flash. If 
the temperature inside the projector increases further and a 
temperature error occurs, it will illuminate at the same time that 
the [WARNING] indicator illuminates.
(1)
(2) (3) (4)
(5)
(7)(6) 
						

							39
Part Names
Before Use
■LED Indicator Displays
The LED indicators flash or illuminate to indicate the operating status of the projector.
* Either the [POWER ON] or [STAND BY] indicator illuminates, depending on the power 
status.
: Off  : Lit  : Flashing
LED indicator
Operating status POWER 
ON 
(green)
STAND BY 
(red)WARN-
ING (red)LAMP 
(orange)TEMP 
(red)
Power is not connected.
Ready to turn power on (standby).
Power is on.
Power-saving mode engaged.
 * *The time for replacing the lamp is near.
Internal temperature is high.
A lamp error has occurred.
Power was turned off due to high inter-
nal temperature.
The lamp cover is open.
Another error has occurred. 
						

							Part Names
40
Input Terminal
(1)LAN port (P166)
Connects the LAN cable.
Used to connect the projector to a network.
(2)ANALOG PC / COMPONENT IN terminal
( /COMPONENT IN) (P47, P53)
Receives the analog PC signal (Analog PC).
A component cable can be used to receive the component image signal (Component).
(3)DVI-D IN terminal (  DVI-D IN) (P50)
Connects the external monitor output from a computer.
Receives the digital signal (Digital PC).
(4)HDMI IN terminal (HDMI IN) (P51)
Receives the digital content image signal (HDMI).
Carries both video and audio signals across a single cable.
(5)Service port (CONTROL)
This terminal is used by servicing technicians. It is not used during ordinary use.
(6)AUDIO IN terminal (AUDIO IN) (P47, P50, P53)
Receives the audio input corresponding to 2 image input systems other than HDMI IN.
The internal speaker outputs the audio for the selected image signal.
(7)AUDIO OUT terminal ( AUDIO OUT) (P51, P55)
Outputs the audio to external AV equipment. This outputs the audio signal that corre-
sponds to the projected image signal.
(1) (2)
(3) (4) (5) (6) (7)