Canon Projector WX 6000 User Manual
Have a look at the manual Canon Projector WX 6000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 126
Setting Various Functions
126
Showing / Hiding the
Guide Screen
[Guide]
You can select whether to show or hide the
guide screen which explains operations.
MENU > [System settings] > [Guide]
MENU > [Install settings] > [On screen] >
[Guide]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default.
The guide screen is shown at the following
times.
-Power is turned off by pressing the
POWER button. (P80)-No input signal...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-125.png "Page 126
Setting Various Functions
126
Showing / Hiding the
Guide Screen
[Guide]
You can select whether to show or hide the
guide screen which explains operations.
MENU > [System settings] > [Guide]
MENU > [Install settings] > [On screen] >
[Guide]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default.
The guide screen is shown at the following
times.
-Power is turned off by pressing the
POWER button. (P80)-No input signal...")
![Page 127
127
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the
Input Status
[Show Input Status]
You can select whether the signal status is
displayed on the screen when there is no
signal or when making signal settings.
MENU > [System settings] > [Show Input Sta-
tus]
MENU > [Install settings] > [On screen] > [Show
input status]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default....](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-126.png "Page 127
127
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the
Input Status
[Show Input Status]
You can select whether the signal status is
displayed on the screen when there is no
signal or when making signal settings.
MENU > [System settings] > [Show Input Sta-
tus]
MENU > [Install settings] > [On screen] > [Show
input status]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[On] is the factory default....")
![Page 128
Setting Various Functions
128
Setting a Password
[Password settings]
Disables the projector unless the correct
password is entered.
MENU > [System settings] > [Other settings] >
[Password settings]
MENU > [System settings] > [Other settings] >
[Password settings]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[Off] is the factory default.
You cannot set [On] unless you have com-
pleted [Register password].
Once you set a password, the...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-127.png "Page 128
Setting Various Functions
128
Setting a Password
[Password settings]
Disables the projector unless the correct
password is entered.
MENU > [System settings] > [Other settings] >
[Password settings]
MENU > [System settings] > [Other settings] >
[Password settings]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
[Off] is the factory default.
You cannot set [On] unless you have com-
pleted [Register password].
Once you set a password, the...")
![Page 129
129
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Registering a Password
[Register password]
You can register a password for starting
projection.
MENU > [System settings] > [Other settings] >
[Register password]
MENU > [System settings] > [Other settings] >
[Register password]
Press the OK button after selecting [Reg-
ister password], and the following screen
for registering a password appears.Enter a 4 digit password.
For the WUX5000 / WUX4000, the pass-
word can be entered...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-128.png "Page 129
129
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Registering a Password
[Register password]
You can register a password for starting
projection.
MENU > [System settings] > [Other settings] >
[Register password]
MENU > [System settings] > [Other settings] >
[Register password]
Press the OK button after selecting [Reg-
ister password], and the following screen
for registering a password appears.Enter a 4 digit password.
For the WUX5000 / WUX4000, the pass-
word can be entered...")
![Page 130
Setting Various Functions
130
Prohibiting Operation of
the Lens
[Lens Ctrl Lock]
You can lock lens-related button opera-
tions.
MENU > [System settings] > [Other settings] >
[Lens Ctrl Lock]
Press the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
HDMIComponent
Digital PCAnalog PC
Off Focus, zoom, lens shift, and other
lens-related operations are permit-
ted.
On Focus, zoom, lens shift, and other
lens-related operations are locked.](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-129.png "Page 130
Setting Various Functions
130
Prohibiting Operation of
the Lens
[Lens Ctrl Lock]
You can lock lens-related button opera-
tions.
MENU > [System settings] > [Other settings] >
[Lens Ctrl Lock]
Press the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
HDMIComponent
Digital PCAnalog PC
Off Focus, zoom, lens shift, and other
lens-related operations are permit-
ted.
On Focus, zoom, lens shift, and other
lens-related operations are locked.")
![Page 131
131
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lens Shift Reset
[Lens shift Reset]
Resets the lens shift (P74) setting to the
standard position.
MENU > [System settings] > [Other settings] >
[Lens shift Reset]
MENU > [Install settings] > [Lens shift Reset]
Select [Lens shift Reset] and press the OK
button. The following screen for confirma-
tion appears.
Use the [ ]
/ [ ] buttons to select the
standard position, and then select OK.
The standard position varies depending...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-130.png "Page 131
131
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lens Shift Reset
[Lens shift Reset]
Resets the lens shift (P74) setting to the
standard position.
MENU > [System settings] > [Other settings] >
[Lens shift Reset]
MENU > [Install settings] > [Lens shift Reset]
Select [Lens shift Reset] and press the OK
button. The following screen for confirma-
tion appears.
Use the [ ]
/ [ ] buttons to select the
standard position, and then select OK.
The standard position varies depending...")
![Page 132
Setting Various Functions
132
Extending the Menu Dis-
play Time
[Menu display time]
The setting for the menu display time can
be extended from the normal 10 or 30 sec-
onds to 3 minutes. For the WUX5000 /
WUX4000, if [Extended] is set, when push-
ing and holding a button on the projector or
remote control, the same key repeat func-
tion will be enabled as when pressing a
button repeatedly.
MENU > [System settings] > [Other settings] >
[Menu display time]
MENU > [Install settings] > [On screen] >...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-131.png "Page 132
Setting Various Functions
132
Extending the Menu Dis-
play Time
[Menu display time]
The setting for the menu display time can
be extended from the normal 10 or 30 sec-
onds to 3 minutes. For the WUX5000 /
WUX4000, if [Extended] is set, when push-
ing and holding a button on the projector or
remote control, the same key repeat func-
tion will be enabled as when pressing a
button repeatedly.
MENU > [System settings] > [Other settings] >
[Menu display time]
MENU > [Install settings] > [On screen] >...")
![Page 133
133
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the High
Temperature Warning Icon
[Overheat Warning Display]
You can select whether or not to display
the [High temperature warning] icon when
the temperature inside the projector has
increased and is approaching the overheat
temperature.
MENU > [System settings] > [Other settings] >
[Overheat Warning Display]
MENU > [Install settings] > [On screen] > [Over-
heat warning display]
Press the OK button to accept...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-132.png "Page 133
133
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the High
Temperature Warning Icon
[Overheat Warning Display]
You can select whether or not to display
the [High temperature warning] icon when
the temperature inside the projector has
increased and is approaching the overheat
temperature.
MENU > [System settings] > [Other settings] >
[Overheat Warning Display]
MENU > [Install settings] > [On screen] > [Over-
heat warning display]
Press the OK button to accept...")
![Page 134
Setting Various Functions
134
Reducing Flickering
[Deflicker]
This function adjusts the image display in
order to reduce flickering in the projected
image.
MENU > [System settings] > [Other settings] >
[Deflicker]
• When deflicker is performed, the image adjustment screen is projected for approx-
imately 20 seconds.
To cancel deflicker, press the POWER but-
ton.
Gamma Restore
[Gamma restore]
The gamma characteristic of the LCD
panel inside the projector can be cor-
rected.
MENU > [System settings]...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-133.png "Page 134
Setting Various Functions
134
Reducing Flickering
[Deflicker]
This function adjusts the image display in
order to reduce flickering in the projected
image.
MENU > [System settings] > [Other settings] >
[Deflicker]
• When deflicker is performed, the image adjustment screen is projected for approx-
imately 20 seconds.
To cancel deflicker, press the POWER but-
ton.
Gamma Restore
[Gamma restore]
The gamma characteristic of the LCD
panel inside the projector can be cor-
rected.
MENU > [System settings]...")
![Page 135
135
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lamp Warning Display
[Lamp warning display]
A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.
MENU > [Install settings] > [On screen] > [Lamp
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Regardless of the [Lamp warning display]
setting,...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-134.png "Page 135
135
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lamp Warning Display
[Lamp warning display]
A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.
MENU > [Install settings] > [On screen] > [Lamp
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Regardless of the [Lamp warning display]
setting,...")
![Page 136
Setting Various Functions
136
Select [Lamp counter] and press the OK
button to display the lamp counter.
Select [Reset] and press the OK button.
Select [OK] on the screen for confirmation
and press the OK button to reset the lamp
counter.
Press the MENU button or EXIT button
(WX6000 / SX6000).
■About the Display of the Lamp
Counter
The lamp counter displays the hours of
use of the lamp in the following way.
Less than 2,700 hours
Displayed as a green bar.
2,700 hours to less than 3,000 hours...](http://img.usermanuals.tech/thumb/14/99279/w64_projector_manual_7024_d-135.png "Page 136
Setting Various Functions
136
Select [Lamp counter] and press the OK
button to display the lamp counter.
Select [Reset] and press the OK button.
Select [OK] on the screen for confirmation
and press the OK button to reset the lamp
counter.
Press the MENU button or EXIT button
(WX6000 / SX6000).
■About the Display of the Lamp
Counter
The lamp counter displays the hours of
use of the lamp in the following way.
Less than 2,700 hours
Displayed as a green bar.
2,700 hours to less than 3,000 hours...")
131 Setting Various Functions User’s ManualSettin g Functions from Menus Lens Shift Reset [Lens shift Reset] Resets the lens shift (P74) setting to the standard position. MENU > [System settings] > [Other settings] > [Lens shift Reset] MENU > [Install settings] > [Lens shift Reset] Select [Lens shift Reset] and press the OK button. The following screen for confirma- tion appears. Use the [ ] / [ ] buttons to select the standard position, and then select OK. The standard position varies depending on the type of lens unit used. For details, refer to page 75. The position which was adjusted by lens shift does not change when the power is turned off. HDMIComponent Digital PCAnalog PC
Setting Various Functions 132 Extending the Menu Dis- play Time [Menu display time] The setting for the menu display time can be extended from the normal 10 or 30 sec- onds to 3 minutes. For the WUX5000 / WUX4000, if [Extended] is set, when push- ing and holding a button on the projector or remote control, the same key repeat func- tion will be enabled as when pressing a button repeatedly. MENU > [System settings] > [Other settings] > [Menu display time] MENU > [Install settings] > [On screen] > [Menu display time] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). [Normal] is the factory default. The following display and operation are also changed. *1 WUX4000 *2 WX6000 / SX6000HDMIComponent Digital PCAnalog PC NormalThe menu is displayed for 10 or 30 sec- onds. ExtendedThe menu is displayed for 3 minutes. Item [Normal] [Extended]The display time of the following screens -MENU screen -Input (P60) -Zoom adjustment (P71) -Focus adjustment (P73) -Keystone adjustment (P76) -Keystone reset (P77) -D.image shift adjustment (P67, P68) -D.image shift reset (P69) -Aspect (P70) -Image mode (P78) -Volume adjustment (P83) -Lamp mode (P119) *1 -Lens shift (P74) -Lens shift reset (P131) 10 / 30 seconds3 minutes Press-and-hold operation of pointer buttons other than for [Zoom adjustment], [Focus adjustment], and [Lens shift] Press-and-hold operation of VOL buttonPress-and-hold operation of the D.ZOOM buttonEnabled Disabled Key repeat *2 [On] [Off]
133 Setting Various Functions User’s ManualSettin g Functions from Menus Showing / Hiding the High Temperature Warning Icon [Overheat Warning Display] You can select whether or not to display the [High temperature warning] icon when the temperature inside the projector has increased and is approaching the overheat temperature. MENU > [System settings] > [Other settings] > [Overheat Warning Display] MENU > [Install settings] > [On screen] > [Over- heat warning display] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). When [On] is set, the [High temperature warning] icon shown below will be dis- played when the temperature inside the projector is abnormally high. • [Off] is the factory default. HDMIComponent Digital PCAnalog PC Off The [High temperature warning] icon is not displayed. On The [High temperature warning] icon is displayed. Screen
Setting Various Functions 134 Reducing Flickering [Deflicker] This function adjusts the image display in order to reduce flickering in the projected image. MENU > [System settings] > [Other settings] > [Deflicker] • When deflicker is performed, the image adjustment screen is projected for approx- imately 20 seconds. To cancel deflicker, press the POWER but- ton. Gamma Restore [Gamma restore] The gamma characteristic of the LCD panel inside the projector can be cor- rected. MENU > [System settings] > [Other settings] > [Gamma restore] If Gamma restore is performed, the pro- jected image will be adjusted for a period of approximately 150 seconds. To stop Gamma restore, press the POWER button or the EXIT button (WX6000 / SX6000). HDMIComponent Digital PCAnalog PC Off Deflicker adjustment is not per- formed. Adjust Select [Deflicker] to adjust. The fol- lowing screen appears. OK Deflicker is performed. Cancel Deflicker is not performed. Deflicker can only be used when the lamp has been on for approximately 30 minutes or longer. Be aware that deflicker may be unable to eliminate flickering in some cases. HDMIComponent Digital PCAnalog PC Off Returns to the factory default with- out performing Gamma restore. Adjust Performs Gamma restore and applies the result. OK Gamma Restore is per- formed. Cancel Gamma Restore is not performed. Gamma restore can be performed once approximately 30 minutes have elapsed after the lamp flashes. Be aware that if Gamma restore adjustment is performed, the color quality of the projected image may be changed.
135 Setting Various Functions User’s ManualSettin g Functions from Menus Lamp Warning Display [Lamp warning display] A message that advises you to change the lamp can be set to display when the lamp has been used for the specified period of time. MENU > [Install settings] > [On screen] > [Lamp warning display] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [On]. Regardless of the [Lamp warning display] setting, when the lamp replacement time has been reached, the LAMP indicator on the projector will flash. Resetting the Lamp Counter [Lamp counter] You can reset the lamp counter that indi- cates the time for lamp replacement. MENU > [System settings] > [Other settings] > [Lamp counter] MENU > [System settings] > [Other settings] > [Lamp counter] HDMIComponent Digital PCAnalog PC OffThe lamp warning display is not displayed. OnThe prepare lamp message and the lamp warning display are dis- played.HDMIComponent Digital PCAnalog PC Do not reset the lamp counter except when you have replaced the lamp. Otherwise, the lamp counter cannot indicate the correct timing for replac- ing the lamp. For details of lamp replacement, refer to page 195.
Setting Various Functions 136 Select [Lamp counter] and press the OK button to display the lamp counter. Select [Reset] and press the OK button. Select [OK] on the screen for confirmation and press the OK button to reset the lamp counter. Press the MENU button or EXIT button (WX6000 / SX6000). ■About the Display of the Lamp Counter The lamp counter displays the hours of use of the lamp in the following way. Less than 2,700 hours Displayed as a green bar. 2,700 hours to less than 3,000 hours Displayed as a green and yellow bar.When the lamp hours are 2,700 hours to less than 3,000 hours, the message “Obtain a new lamp.” appears when power is turned on. Over 3,000 hours Displayed as a green, yellow and red bar. The message “Replace with the new lamp.” appears when power is turned on.
137 Setting Various Functions User’s ManualSettin g Functions from Menus Filter Warning Display [Filter warning display] A message advising you to perform clean- ing can be set to display when the filter needs cleaning. MENU > [Install settings] > [On screen] > [Filter warning display] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [On]. Resetting the Air Filter Counter [Filter counter] This resets the counter which reminds you of the time for cleaning and replacing the air filter. MENU > [System settings] > [Other settings] > [Filter counter] If the OK button is pressed on [Filter counter], the air filter counter is displayed. Select [Reset] and press the OK button. [OK] is selected on the confirmation screen and the OK button is pressed, the air filter counter is reset. Press the MENU button or EXIT button (WX6000 / SX6000). HDMIComponent Digital PCAnalog PC OffThe filter warning display is not displayed. OnThe filter warning display is dis- played.HDMIComponent Digital PCAnalog PC For details about how to replace or clean the filter, refer to page 193.
Setting Various Functions 138 Displaying Test Pattern [Test pattern] A test pattern for checking the resolution and color when installing the projector can be displayed. MENU > [Install settings] > [Test pattern] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [Off]. While the test pattern is displayed, you can use the [] / [] buttons to change to a dif- ferent test pattern. Also, if a test pattern has option settings, you can change the settings using the [] / [] button. (P217) The test pattern can also be displayed or turned off by pressing the TEST PATTERN button on the remote control. HDMIComponent Digital PCAnalog PC OffThe test pattern is not displayed. OnThe test pattern is displayed. The following functions in the [Image adjustment] tab are not applied to the test pattern. Brightness adjustment function (P111) Contrast adjustment function (P112) Sharpness adjustment function (P113) Color level adjustment function (P114) Color balance adjustment function (P114)
139 Setting Various Functions User’s ManualSettin g Functions from Menus Selecting Audio In Termi- nal [Audio in terminal select] You can select the audio in terminal that is used for each input signal (HDMI, Digital PC, Analog PC-1, Analog PC-2, Compo- nent). MENU > [Install settings] > [Audio in terminal select] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). • The factory default is as follows. HDMI: HDMI Digital PC: Audio in 2 Analog PC-1: Audio in 1 Analog PC-2: Audio in 2 Component: Audio in 1 Locking Installation Related Functions [Positional lock] Operation of installation related functions can be prohibited. MENU > [Install settings] > [Positional lock] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [Off]. The positional lock can be applied to Test pattern display, Screen aspect settings, Key- stone adjustment, Digital image shift adjust- ment, Image flip H/V, Focus adjustment, Zoom adjustment, Lens shift adjustment and Lens shift reset. HDMIComponent Digital PCAnalog PC Off No audio is output. Audio in 1 Outputs the audio signal that is inputted in Audio in terminal 1. Audio in 2 Outputs the audio signal that is inputted in Audio in terminal 2. HDMI Outputs the HDMI audio sig- nal. (Only for HDMI) HDMIComponent Digital PCAnalog PC Off The positional lock is not used. On Installation related functions can- not be used.
Setting Various Functions 140 Resetting to the Default Setting [Factory defaults] You can reset the menu item settings and restore the system settings to the factory defaults. MENU > [System settings] > [Other settings] > [Factory defaults] MENU > [System settings] > [Other settings] > [Factory defaults] Select [Factory defaults] and press the OK button. The following screen for confirma- tion appears. This function does not reset the values for [Lamp counter], [Language], [Remote con- trol], [Input signal], [Network Setting], [Filter counter], [Focus position], [Zoom position], and [Lens shift position]. For factory defaults settings, refer to pages 232 – 238. The contents of the user memory return to the conditions at the time it was saved. (P110) HDMIComponent Digital PCAnalog PC OKSettings are reset to default. CancelSettings are not reset to default.