Canon Projector WX 6000 User Manual
Here you can view all the pages of manual Canon Projector WX 6000 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 181
181 Configuring the Network From the Computer Installation Manual Connecting to a Networ k The error meanings are as shown below. ErrorMeaning Input error A setting outside the valid range was set on the setting screen. Password setting error The set password and confirmation password did not match. Invalid SMTP The SMTP server IP address has not been set. System failed to connect SMTP server.Failed to connect to the SMTP server when send- ing a test mail. System failed to connect POP3 server.Failed...
Page 182
![Page 182
182
Setting Up the Network
■Setting Basic Information [Network]
From [Network] in the settings window, you can log into the web screen and set basic
network information. For the setting procedure, refer to page 177.
ItemExplanationFactory default setting
Password
User name When logging into the web screen,
enter the user name in 1-byte
alphanumeric characters and
symbols (4 -15 characters).root
New password When logging into the web screen,
enter the password in 1-byte
alphanumeric characters...](http://img.usermanuals.tech/thumb/14/99279/w300_projector_manual_7024_d-181.png "Page 182
182
Setting Up the Network
■Setting Basic Information [Network]
From [Network] in the settings window, you can log into the web screen and set basic
network information. For the setting procedure, refer to page 177.
ItemExplanationFactory default setting
Password
User name When logging into the web screen,
enter the user name in 1-byte
alphanumeric characters and
symbols (4 -15 characters).root
New password When logging into the web screen,
enter the password in 1-byte
alphanumeric characters...")
182 Setting Up the Network ■Setting Basic Information [Network] From [Network] in the settings window, you can log into the web screen and set basic network information. For the setting procedure, refer to page 177. ItemExplanationFactory default setting Password User name When logging into the web screen, enter the user name in 1-byte alphanumeric characters and symbols (4 -15 characters).root New password When logging into the web screen, enter the password in 1-byte alphanumeric characters...
Page 183
![Page 183
183
Setting Up the Network
Installation Manual Connecting to a Networ
k
■Setting Up Email [Mail]
From [Mail] in the settings window, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to page 177.
ItemExplanationFactory default setting
To: Enter the recipient address for error
mails in 1-byte alphanumeric char-
acters and symbols (1 - 63 charac-
ters).MailUserAccount
Cc: Enter the CC address for error mails
in 1-byte alphanumeric characters
and...](http://img.usermanuals.tech/thumb/14/99279/w300_projector_manual_7024_d-182.png "Page 183
183
Setting Up the Network
Installation Manual Connecting to a Networ
k
■Setting Up Email [Mail]
From [Mail] in the settings window, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to page 177.
ItemExplanationFactory default setting
To: Enter the recipient address for error
mails in 1-byte alphanumeric char-
acters and symbols (1 - 63 charac-
ters).MailUserAccount
Cc: Enter the CC address for error mails
in 1-byte alphanumeric characters
and...")
183 Setting Up the Network Installation Manual Connecting to a Networ k ■Setting Up Email [Mail] From [Mail] in the settings window, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to page 177. ItemExplanationFactory default setting To: Enter the recipient address for error mails in 1-byte alphanumeric char- acters and symbols (1 - 63 charac- ters).MailUserAccount Cc: Enter the CC address for error mails in 1-byte alphanumeric characters and...
Page 184
![Page 184
Setting Up the Network
184
■Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings window, you can configure the settings for authentica-
tion of mail that is sent when an error occurs. For the setting procedure, refer to page
177.
ItemExplanationFactory default set-
ting
Mail authentication Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.OFF
User name Enter the user name to use for mail
authentication in 1-byte...](http://img.usermanuals.tech/thumb/14/99279/w300_projector_manual_7024_d-183.png "Page 184
Setting Up the Network
184
■Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings window, you can configure the settings for authentica-
tion of mail that is sent when an error occurs. For the setting procedure, refer to page
177.
ItemExplanationFactory default set-
ting
Mail authentication Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.OFF
User name Enter the user name to use for mail
authentication in 1-byte...")
Setting Up the Network 184 ■Mail Authentication Settings [Mail auth] From [Mail auth] in the settings window, you can configure the settings for authentica- tion of mail that is sent when an error occurs. For the setting procedure, refer to page 177. ItemExplanationFactory default set- ting Mail authentication Select the mail authentication method. If OFF is selected, the other mail authentication settings cannot be changed.OFF User name Enter the user name to use for mail authentication in 1-byte...
Page 185
![Page 185
185
Setting Up the Network
Installation Manual Connecting to a Networ
k
■Sending a Test Mail [Send test mail]
From [Send test mail] in the settings window, you can send a test mail to the mail
address that was set in [Mail]. The settings cannot be changed from this window.
■SNMP Settings [SNMP]
From [SNMP] in the settings window, you can configure the settings related to control
of projectors which use SNMP (Simple Network Management Protocol). For the set-
ting procedure, refer to page 177....](http://img.usermanuals.tech/thumb/14/99279/w300_projector_manual_7024_d-184.png "Page 185
185
Setting Up the Network
Installation Manual Connecting to a Networ
k
■Sending a Test Mail [Send test mail]
From [Send test mail] in the settings window, you can send a test mail to the mail
address that was set in [Mail]. The settings cannot be changed from this window.
■SNMP Settings [SNMP]
From [SNMP] in the settings window, you can configure the settings related to control
of projectors which use SNMP (Simple Network Management Protocol). For the set-
ting procedure, refer to page 177....")
185 Setting Up the Network Installation Manual Connecting to a Networ k ■Sending a Test Mail [Send test mail] From [Send test mail] in the settings window, you can send a test mail to the mail address that was set in [Mail]. The settings cannot be changed from this window. ■SNMP Settings [SNMP] From [SNMP] in the settings window, you can configure the settings related to control of projectors which use SNMP (Simple Network Management Protocol). For the set- ting procedure, refer to page 177....
Page 186
![Page 186
Setting Up the Network
186
■Setting Projector Information [Projector info.]
From [Projector info.] in the settings window, you can set the names and location
names which are used to identify projectors when multiple projectors are installed on
the network. For the setting procedure, refer to page 177.
ItemExplanationFactory default setting
SNMP Select the SNMP function version. If OFF is
selected, the SNMP function will be turned
off and the other settings in this window
cannot be changed.OFF...](http://img.usermanuals.tech/thumb/14/99279/w300_projector_manual_7024_d-185.png "Page 186
Setting Up the Network
186
■Setting Projector Information [Projector info.]
From [Projector info.] in the settings window, you can set the names and location
names which are used to identify projectors when multiple projectors are installed on
the network. For the setting procedure, refer to page 177.
ItemExplanationFactory default setting
SNMP Select the SNMP function version. If OFF is
selected, the SNMP function will be turned
off and the other settings in this window
cannot be changed.OFF...")
Setting Up the Network 186 ■Setting Projector Information [Projector info.] From [Projector info.] in the settings window, you can set the names and location names which are used to identify projectors when multiple projectors are installed on the network. For the setting procedure, refer to page 177. ItemExplanationFactory default setting SNMP Select the SNMP function version. If OFF is selected, the SNMP function will be turned off and the other settings in this window cannot be changed.OFF...
Page 187
![Page 187
187
Setting Up the Network
Installation Manual Connecting to a Networ
k
■Setting PJLink [PJLink]
From [PJLink] in the setting window, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer to
page 177. For information about PJLink, refer to page 174.
ItemExplanationFactory default
setting
PJLink Turn the PJLink function on or off. If
OFF is selected, the PJLink func-
tion will be turned off and the other
settings in this window...](http://img.usermanuals.tech/thumb/14/99279/w300_projector_manual_7024_d-186.png "Page 187
187
Setting Up the Network
Installation Manual Connecting to a Networ
k
■Setting PJLink [PJLink]
From [PJLink] in the setting window, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer to
page 177. For information about PJLink, refer to page 174.
ItemExplanationFactory default
setting
PJLink Turn the PJLink function on or off. If
OFF is selected, the PJLink func-
tion will be turned off and the other
settings in this window...")
187 Setting Up the Network Installation Manual Connecting to a Networ k ■Setting PJLink [PJLink] From [PJLink] in the setting window, you can set the PJLink functions which are the standard for projector management on a network. For the setting procedure, refer to page 177. For information about PJLink, refer to page 174. ItemExplanationFactory default setting PJLink Turn the PJLink function on or off. If OFF is selected, the PJLink func- tion will be turned off and the other settings in this window...
Page 188
188 Controlling the Projector from a Computer When the projector is connected to a network, it is possible to control the projector from a computer via the network. 1Turn on the computer and projector. 2Launch a web browser, enter “http://(projector IP address)” in the address bar, and press the Enter key. The password input screen appears. The factory default IP address is “192.168.254.254”. It is possible to check the IP address from the projector menu. 3Enter the user name and password on the...
Page 189
![Page 189
Controlling the Projector from a Computer
189
Installation Manual Connecting to a Networ
k
5The projector control screen appears. The projector can be controlled from this
screen.
6When the operations are finished, click [Back to top] to return the initial web screen.
ItemExplanation
Projector name The name of the connected projector is displayed. (P186)
IP address The IP address of the connected projector is displayed. (P182)
Refresh Refreshes the displayed contents with the most recent informa-
tion....](http://img.usermanuals.tech/thumb/14/99279/w300_projector_manual_7024_d-188.png "Page 189
Controlling the Projector from a Computer
189
Installation Manual Connecting to a Networ
k
5The projector control screen appears. The projector can be controlled from this
screen.
6When the operations are finished, click [Back to top] to return the initial web screen.
ItemExplanation
Projector name The name of the connected projector is displayed. (P186)
IP address The IP address of the connected projector is displayed. (P182)
Refresh Refreshes the displayed contents with the most recent informa-
tion....")
Controlling the Projector from a Computer 189 Installation Manual Connecting to a Networ k 5The projector control screen appears. The projector can be controlled from this screen. 6When the operations are finished, click [Back to top] to return the initial web screen. ItemExplanation Projector name The name of the connected projector is displayed. (P186) IP address The IP address of the connected projector is displayed. (P182) Refresh Refreshes the displayed contents with the most recent informa- tion....
Page 190
190 Error Mail The messages shown in the following error list are sent when an error occurs in the pro- jector. Error list * For details, contact the Canon Customer Support Center. Errors related to temperatureError nameTemperature abnormality Text The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector...