Canon Projector WX 6000 User Manual

141
User’s ManualSettin
g Functions from Menus
Checking Projector Information
[Information]
You can check information about the 
signal types of the images projected and other
information.
Information shown
* Not displayed when network functions are [Off].
HDMIComponent
Digital PCAnalog PC
ItemMeaning
Model nameWUX5000 / WUX4000 / WX6000 / SX6000
Input signalDetails of the input signal currently selected
Information such as the signal type, signal resolution, and frequency 
is displayed.
FirmwareCurrent...

142 

143
MULTIMEDIA PROJECTOR
Installation Manual
(Installation and 
Maintenance)
Do not attempt installation yourself. Be sure to
request installation from a qualified technician or
contact the Canon Customer Support Center. 

144 

Projecting an Image Safety Instructions
Before Use Table of Contents
Useful Functions Available 
During a Presentation
Setting Functions from Menus
Installation
Connecting to a Network
Maintenance
Index
Appendix
User’s Manual
Installation Manual
Appendix
145
Installation 

146
Installation Precautions
Precautions When Carrying the Projector
Installation Precautions
Be sure to read on page 12 – 24. Pay attention to the following when installing the 
projector.
Precautions When Carrying and Transporting the Pro-
jector
Prepare the projector as described below before carrying it.
• Disconnect the cables connected to the projector. Carrying 
the projector with the cables attached may cause an acci-
dent.
• Retract the adjustable feet.
• When the projector is transported after...

147
Installation Precautions
Installation Manual Installation
■Do Not Use in the Following Environments
 Do not install the projector in a humid or dusty location or a position where there is a lot 
of oily smoke or cigarette smoke. Optical parts such as the lens and mirror may be 
stained, resulting in poor picture quality.
 Do not install close to high-voltage power lines or power sources. The projector may not 
operate correctly.
 Do not use the projector on a soft surface such as a carpet or sponge...

Installation Precautions
148
■When using mounted on the ceiling
■Install facing in the correct directionWhen the projector is used mounted on the 
ceiling or installed in a high location, it is nec-
essary to periodically clean the air intake and 
exhaust vents, and the area around the air fil-
ter. If dust accumulates in the intake or 
exhaust vents, cooling performance will dete-
riorate, causing the internal temperature to rise and possibly resulting in a 
malfunction or fire. Use a vacuum cleaner or...

149
Installation Manual Installation
Installation Procedure
Selecting the Projection Method and 
Installation Location (P150)
Installing / Removing the Lens Unit (P151)
Setting Up the Projector (P156)
Connecting to AV Equipment (P162)
Selecting an Input Signal (P59)
Adjusting the Image (P61)
Connecting to a Network (P165) 

150
Selecting the Projection Method and Installation Location
■Ceiling Mounting or Rear Projection
You can mount the projector on the ceiling (ceiling mounting) with it turned upside down 
or place it behind the screen (rear projection) if you use a translucent screen.
Make sure to use the optional ceiling attachment. For the ceiling attachment, refer to 
page 231.
■Adjusting the projection position when installed on the floor
To adjust the projection position when the projector is installed on the...