Canon Projector WX 6000 User Manual

Projecting an Image
Safety Instructions
Table of Contents
Useful Functions Available 
During a Presentation
Setting Functions from Menus
Installation
Connecting to a Network
Maintenance
Appendix
Index
Appendix
User’s Manual
Installation Manual
Before Use
201
Appendix 

202
Troubleshooting
LED Indicator Meanings
When there is a problem with the projector, the LED indicator on the side of the projector 
illuminates or flashes continuously after the projector is turned off.
 Wait until the cooling fan stops and disconnect the power plug from the electrical outlet 
before dealing with the problem.
LED indicator 
statusMeaning Countermeasure
WARNING and 
TEMP are lit.Temperature 
abnormalityThe temperature inside the projector is too high for some 
reason or the outside air...

203
Troubleshooting
App
endix Other Information
Symptoms and Solutions
■You Cannot Turn on the Projector
■You Cannot Project an Image from the Projector
WARNING 
(only) flashes 6 
times repeat-
edly.Faulty lens 
connectorDisconnect the lens connector which joins the lens unit and 
projector. Contact the Canon Customer Support Center.
WARNING 
(only) flashes 3 
times repeat-
edly.Filter error The air filter is not installed. Check whether or not the air filter 
is installed correctly. Contact the Canon...

Troubleshooting
204
■There is no Sound
Connection with the input terminal 
has not been performed correctly.Check whether the AV equipment is connected to the pro-
jector input terminal correctly. (P47)
No input signal type has been 
selected for the connected AV 
equipment.Check that the same input signal has been correctly 
selected for the connected AV equipment from the [INPUT] 
menu. (P60)
The input signal type is incorrect. Check whether the selected input signal type is correct. 
(P94, P218)
The...

205
Troubleshooting
App
endix Other Information
■The Projected Image Is Blurred
■You Cannot Project an Image Appropriately
■The Projector Power Turns Off
Cause Countermeasure
The image is out of focus. Adjust the focus. (P73)
The distance to the screen is too 
short.Check whether the distance to the screen is appropriate. If 
the distance is shorter than approximately 1.3 m (4.3), the 
projector cannot focus on the screen. (P156)
The projector is not placed 
straight in front of the screen.Check whether...

Troubleshooting
206
■You Cannot Operate the Remote Control
If the above causes cannot be identified, the projector may be damaged. Contact the 
Canon Customer Support Center as soon as possible.
The lamp has broken (or there is a 
lamp malfunction).Check whether the lamp has broken. 
If the lamp has broken, follow the instructions on page 21. If 
the lamp has not broken, there may be a malfunction with 
the lamp. Check the lamp by replacing it with a spare lamp 
if you have one. (P22, P195, P196)
The...

207
App
endix Other Information
Relationship between Aspect and Screen Aspect
This section describes the relationship between screen aspect (P63) and aspect (P69).
To project an image on the whole screen, select the most appropriate screen aspect ratio 
and aspect according to the aspect ratio of the screen and input signal type.
 If an image from image software with an aspect ratio of 16:9 is not projected correctly, select [16:9] 
as the screen aspect.
 For a 16:9 image with black borders at the top...

Relationship between Aspect and Screen Aspect
208
■When the image is projected on a 16:9 screen
■When the image is projected on a 4:3 screen
Aspect ratio of 
connected deviceScreen aspect setting 
(P63)Aspect setting (P69) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:9]
[16:9 D. image shift][16:9]
(16:9)
1920 x 1080
1280 x 720[16:9]
[Auto]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[16:9]
Aspect ratio of 
connected deviceScreen aspect setting 
(P63)Aspect setting (P69) Screen image
(16:10)
1920...

209
Relationship between Aspect and Screen Aspect
App
endix Other Information
■When projecting on a 16:10 screen in the aspect ratio of the connected 
device
■When projecting on a 16:9 screen in the aspect ratio of the connected 
device
Aspect ratio of 
connected deviceScreen aspect setting 
(P63)Aspect setting (P69) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:10][Full]
[Auto]
(16:9)
1920 x 1080
1280 x 720[16:9]
[Auto]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[4:3]
[Auto]
Aspect ratio of...

Relationship between Aspect and Screen Aspect
210
■When projecting on a 4:3 screen in the aspect ratio of the connected 
device
WX6000
■When the image is projected on a 16:10 screen
Aspect ratio of 
connected deviceScreen aspect setting 
(P63)Aspect setting (P69) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[4:3]
[4:3 D. image shift][Auto]
(16:9)
1920 x 1080
1280 x 720[16:9]
[Auto]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[4:3]
[Auto]
Aspect ratio of 
connected deviceScreen aspect setting...