Home > Canon > Projector > Canon Projector WUX5000 User Manual

Canon Projector WUX5000 User Manual

Here you can view all the pages of manual Canon Projector WUX5000 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 51

51
Connecting the Projector
User’s ManualProjectin
g an Ima
ge
■Connecting with a HDMI Cable (Input signal type: [HDMI] – P59)
■Outputting Audio to Speakers
It is possible to output audio from the projected images to amplified speakers.
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will 
reduce the audio volume.
Computer
Digital image 
output terminal 
(HDMI terminal)HDMI cable (not included)
* When an HDMI cable is connected, digi-
tal audio is also...

Page 52

Connecting the Projector
52
Connecting to AV Equipment
Connect the projector and AV equipment.
The description provided here is one example. For more detailed information, refer to the 
manual for the connected AV equipment.
■Connecting to Digital Video Output Terminal (Digital Connection)
Connecting with a HDMI cable (Input signal type: [HDMI] – P59) Before connecting the cables, turn off both the projector and AV equipment.
AV equipment
Digital video out-
put terminal 
(HDMI terminal)HDMI cable (not...

Page 53

53
Connecting the Projector
User’s ManualProjectin
g an Ima
ge
■Connecting to Analog Video Output Terminal (Analog Connection)
Connecting with a component cable (Input signal type: [Component] – P59)
A component video signal from the AV equipment can be inputted into the projector by 
connecting the component cable to the COMPONENT IN terminal of the projector.
Use a commercially available component cable (not included) that fits the terminal type of 
the AV equipment to create a relay connection.
AV...

Page 54

Connecting the Projector
54
 Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor 
will reduce the audio volume.
 The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139). 
(WX6000 / SX6000)
AV equipment
When inputting corresponding audioTo ANALOG PC-1 / COMPO-
NENT IN terminalProjector
RCA component 
terminal
D terminal
Mini jack
AUDIO output terminal
RCA plug - RCA plug component cable 
(not included)
Audio cable (not included) D...

Page 55

55
Connecting the Projector
User’s ManualProjectin
g an Ima
ge
■Outputting Audio to Speakers
It is possible to output audio from the projected images to AV equipment or amplified 
speakers.
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will 
reduce the audio volume.
RCA terminalSpeaker
Projector
To AUDIO OUT terminal
Audio cable (not included)Mini jack
Audio input terminal 
(AUDIO IN) 

Page 56

56
Starting Projection
1Check the connection between the projector and the computer or AV equipment. 
(P52 – P55)
2Connect the power cord and make sure that the [STAND BY] indicator is lit (red).
3Press the POWER button.
The [POWER] indicator flashes green, and then stops flashing and remains lit.
The countdown window is displayed for approximately 20 seconds, and then the pro-
jection is started. Press the OK or EXIT button (WX6000 / SX6000) to make the count-
down window disappear.
•Fully insert the...

Page 57

57
Starting Projection
User’s ManualProjectin
g an Ima
ge
4Turn on the computer or AV equipment power.
■When the Language Selection Screen Appears
A window appears when the projector is turned on for the first time. You can select a lan-
guage to be used by the projector for displaying menus and messages in the window. 
Select the desired language with the pointer buttons and press the OK button.
You can change the language from the menu at a later time. (P125)
If the language selection screen is out of...

Page 58

Starting Projection
58
■When the Password Input Screen Appears
If you have set a password, the Password input screen appears. Enter your password. 
(P128)
■When “No signal” Appears
With a notebook computer, the user must turn on the external monitor output. (P58)
Press the INPUT button to select the input signal. (P60)
■When Notebook Computer Screen Does Not Appear
Set your notebook computer to output signals to an external monitor. For more details, 
refer to “Changing Notebook Computer Screen Output”...

Page 59

59
User’s ManualProjectin
g an Ima
ge
Selecting an Input Signal (INPUT)
Select the input signal in the [Input] menu when you want to project a digital PC or AV 
equipment signal, or to switch between inputs when multiple computers or multiple sets 
of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
■Types of Input Signals
The table below shows the relationship among input signals supported by the projector, 
input terminals and connection...

Page 60

Selecting an Input Signal (INPUT)
60
■Selecting an Input Signal
1Press the INPUT button to display the window shown below.
The currently active input signal is marked with a circle and highlighted in orange.
An input signal that is ready for projection is displayed in white. When no signal is 
received, it is displayed in gray. However [HDMI] and [DVI-D] (WUX5000 / WUX4000) 
(Digital PC), or [Digital PC] (WX6000 / SX6000) may be displayed in gray even if they 
are ready for projection.
2You can switch...
Start reading Canon Projector WUX5000 User Manual

Related Manuals for Canon Projector WUX5000 User Manual

All Canon manuals