Canon Projector SX800 Manual

131Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
4If the SMTP mail server authentication is required, click [Mail auth], enter appropriate 
values in the following field, and click the [OK] button.
Select one of the following four authentication method in [Mail authentication]. Select 
[OFF] if the mail authentication is not required (the factory default is [OFF]).
[LOGIN (SMTP authentication)], [CRAM-MD5 (SMTP authentication)],
[USER/PASS (POP before SMTP)], [APOP (POP before...

Setting Network (SX80 II)
132
5If you want to monitor the projector, click [SNMP], enter appropriate values in the fol-
lowing field, and click the [OK] button.
Select one of the following four SNMP version in [SNMP]. Select [OFF] if you dont 
want to monitor the projector.
(The factory default: [OFF])
[V1], [V2c], [V3 (MD5)], [V3 (DES, MD5)]
Setting items:
[Receive community]: The name of the community (user)
[Password]: The password for the community setting
[Confirm password]: The password for...

133Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
6Click [Projector info] and enter the projector name.
 You can input 1 to 63 alphanumeric characters.
 The factory default is [SX80 MarkII].
7Click [Location], enter the projector location, and click the [OK] button.
 You can input up to 63 alphanumeric characters.
 The factory default is blank.
8Click [Apply] when you have completed each menu.
Click the [OK] button when the following dialog box is displayed.
The network...

Setting Network (SX80 II)
134
If you want to test the error report transmission, click [Send test mail].
■Resetting the Network Setting
1Click [Initialize] in the menu screen.
2Click the [OK] button when the following dialog box is displayed.
If you want to restore to the factory setting from the projector, perform [Network set-
ting initialization] from the menu. 

135Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
■Error Notification Message
It sends the following message when an error occurs in the projector.
Error list
* Contact your Canon dealer.Errors related to 
temperatureError name Temperature abnormality
Te x tThe temperature inside the projector is too high for some 
reason or the outside air temperature is higher than the 
specified one. If the problem is inside the projector, 
check whether the projector is installed and operated...

Setting Network (SX80 II)
136
■Projector Control
1Click the [Projector control] button on the network setting screen.
The projector control screen appears.
Controlled items:
[Power]: Turn ON/OFF the projector (P49, P68)
[Input]: Select an input signal (P54)
[Aspect]: Select an aspect ratio (P62)
[Image mode]: Select an image mode (P67)
[Blank]: Blank out the image temporarily (P70)
[Mute]: Mute the sound temporarily (P71)
[Auto setup]: Perform the auto setup function (P52)
[Auto PC]: Perform the auto PC...

137
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory (SX80 II)
Connecting the Projector to Network (SX80 II)
Appendix
Index
Appendix 

138
Troubleshooting
WARNING Lamp Flash Patterns
The WARNING lamp on the Control Panel flashes in red after the projector is turned off 
when there is a trouble in the projector.
 Wait until the cooling fan stops and disconnect the power plug from the AC outlet 
before dealing with the trouble.
Flash Pattern Meaning Countermeasure
One flash Temperature, 
abnormalityThe temperature inside the projector is too high for some reason 
or the outside air temperature is higher than the specified one. If 
the...

139Troubleshooting
Appendix
Symptoms and Solutions
■You cannot turn on the projector.
■You cannot project an image from the projector.
Cause Countermeasure
The power cord is not connected 
correctly.Check whether the power cord is connected correctly. (P49)
Check that [Key lock] is not enabled. (P105)
The power cord has just been con-
nected.You cannot turn on the projector until the POWER indicator 
turns red after connecting the power plug. (P49)
The lamp cover is open.
Unplug the power cord from the...

Troubleshooting
140
■A digital camera or USB flash memory is not recognized. (SX80 II)
■You cannot hear sound.
Cause Countermeasure
The external monitor output is not 
set on the notebook computer cor-
rectly.Turn on the external monitor output on the notebook com-
puter. To turn on the external monitor output, press the [LCD] 
or [VGA] function key or a key with an icon for the external 
monitor, while holding down the [Fn] key on the keyboard of 
the notebook computer. (P51)
The combination of keys...