Canon Projector SX800 Manual

121Projecting Data on USB Flash Memory (SX80 II)
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)
Selecting an Image for Projection
This section describes the steps for selecting an image in the USB file browser and pro-
jecting on the screen.
■Selecting a Drive
If a USB flash memory is connected, skip this step.
If a USB memory card reader having multiple memory slots is connected, the drive (mem-
ory slot) list is displayed in the file list.
Select the drive in which the...

Projecting Data on USB Flash Memory (SX80 II)
122
■Selecting an Image File for Projection
1Select an image file with [ ] / [ ].
 To return to upper hierarchy, select   and press the OK button.
2Press the OK button to project the image in full screen.
 To return to the USB file browser, press the OK button.

123Projecting Data on USB Flash Memory (SX80 II)
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)
Operating the Projected Image
When images are projected, you can perform the following operations.
■Switching to the Previous/Next Image
If multiple image files are saved in a folder, you can switch to the previous/next image by 
pressing [ ] / [ ].
■Rotating an Image
You can rotate the image by 90 degrees to the left or to the right by pressing [].
 Even if a slideshow is running,...

Projecting Data on USB Flash Memory (SX80 II)
124
Running a Slideshow of Data saved in a USB Flash 
Memory
You can run a slideshow that projects multiple images stored in a USB flash memory at 
certain intervals.
■Creating an Image File Folder
In the slideshow, image files in a folder are displayed in the alphabetical order of file 
name. Therefore, create a folder in the USB flash memory and save the image files to be 
projected in the slideshow in advance.
To start a slideshow, select and project the...

125
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory (SX80 II)
Connecting the Projector to Network (SX80 II)
Appendix
Index
Connecting the 
Projector to 
Network (SX80 II) 

126
Setting an IP Address (SX80 II)
It is possible to send an error notification e-mail (P135) from the projector to the computer 
when you connect the projector to the network.
To connect via the network, an IP address must be assigned to the projector. Set an IP address 
by following the steps below. (The examples shown are Windows XP screenshot images.)
■Setting IP Address of the Computer
1Connect the projector and a computer directly via a cross or straight type LAN cable.
2Turn on the power of the...

127Setting an IP Address (SX80 II)
Connecting the Projector to Network (SX80 II)
■Resetting the IP Address Setting of the Computer
1Turn off the projector and remove the LAN cable.
2Follow the step 3 to 6 to restore the network setting to the original setting. 

128
Setting Network (SX80 II)
■Displaying the Network Configuration Screen
1Turn on the computer and projector.
2Launch a web browser, enter http://192.168.254.254 in the address bar, and press 
the Enter key.
The password input screen appears.
The supported web browsers is Microsoft Internet Explorer 6 or later.
3In the password input screen, enter root for [User name] and system for [Password] 
and click the [OK] button.
The projector network configuration screen appears on the web browser.
The...

129Setting Network (SX80 II)
Connecting the Projector to Network (SX80 II)
■Setting the Network
1In the menu screen, click [Password], input the new user name and password, and 
click the [OK] button.
Setting items:
[User name]: The user name for logging in the network
[New password]: The new password
[Confirm new password]:  The password for confirmation
2Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button.
Setting items:
[IP address]: The IP address of the...

Setting Network (SX80 II)
130
3Click [Mail], enter appropriate values in the following field for the error report, and click 
the [OK] button.
Setting items:
[To:]: The E-mail address to which the error report is sent 
(Within 63 alphanumeric characters)
[Cc:]: The E-mail address to which the carbon copy of the error 
report is sent (Within 63 alphanumeric characters, can be 
omitted)
[From:]: The sender of the E-mail (the projector)
[SMTP server IP address]: The IP address of the available SMTP mail...