Canon Projector SX800 Manual

111Setting Various Function
Setting Up Functions from Menus
Initializing network settings (SX80 II)
[Other settings] -[Network setting initialization]
You can Initialize the network settings.
Press the OK button after selecting [Net-
work setting initialization], and the follow-
ing screen for confirmation appears:
Press the OK button to accept your setting 
and then press the MENU button.
 Initialized are “IP address” and other 
items set in Connecting the Projector to 
Network (SX80 II) (P125).
 You...

112
Checking the Information of the Projector
[Information]
You can confirm the information about the signal types of the images projected and other 
projector-specific information.
Information shown
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
ItemMeaning
Model nameModel name of this projector
Input signalDetails of the input signal currently selected
“Type of signal”, “resolution of signal”, “frequency” and 
other information is shown.
FirmwareCurrent firmware version
Serial no.Serial number...

113
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory (SX80 II)
Connecting the Projector to Network (SX80 II)
Appendix
Index
Projecting an 
Image from a 
Digital Camera 
or an USB Flash 
Memory (SX80 II) 

114
Projecting an Image from a Digital Camera (SX80 II)
SX80 MarkII supports PictBridge. You can directly 
project an image by connecting the projector with a 
PictBridge-compatible digital camera, digital video 
camera or camera-equipped mobile phone (hereinafter 
called PictBridge-compatible device).
Connecting a Digital Camera
1Turn the projector power on.
2Switch the input signal to [USB].
Press the INPUT button, select [USB] with [ ] / [ ] buttons, and press the OK button.
If you switch to [USB]...

115 Projecting an Image from a Digital Camera (SX80 II)
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)
3Connect a PictBridge-compatible device with the projector using a USB cable.
The terminal form of the device varies depending on the model. Refer to the Users 
Manual for the relevant equipment.
4Turn on the power of the PictBridge-compatible device.
When the communication is ready between the projector and the PictBridge-compat-
ible device, the following mark appears.
If...

Projecting an Image from a Digital Camera (SX80 II)
116
Operating the Projected Image
When images are projected, you can perform the following operations.
■Switching to the Next Image
If you have specified multiple images for printing with the digital camera, you can switch 
to the next image by pressing the OK button.
 You cannot switch to the previous image with the projector operation. To switch to the 
previous image, you must retry the print command with the digital camera.
 Even if a slideshow is...

117 Projecting an Image from a Digital Camera (SX80 II)
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)
Running a Slideshow
You can run a slideshow that projects multiple images stored in the digital camera at cer-
tain intervals.
■Setting a Slideshow Interval
By setting projection intervals in [Slideshow interval] from the menu, you can run a slide-
show of the images (with PictBridge or from a USB flash memory) connected via USB.
Set the slideshow interval by following the...

118
Projecting Data on USB Flash Memory (SX80 II)
You can connect a USB flash memory to the projector 
for direct projection of the images (saved in JPEG for-
mat) saved in the USB flash memory.
 Images saved only in JPEG format are available for 
projection.
Connecting an USB Flash Memory
1Turn the projector power on.
2Switch the input signal to [USB].
Press the INPUT button, select [USB] with [ ] / [ ] buttons, and press the OK button.
If you switch to [USB] when a USB flash memory is not 
connected...

119Projecting Data on USB Flash Memory (SX80 II)
Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)
3Connect a USB flash memory.
Connect a USB flash memory to the USB terminal.
Use a USB cable to connect a digital camera or USB memory card reader.
Be sure to use the USB cable supplied with the equipment connected to the projec-
tor.
If the projector recognizes a USB flash memory, The USB file browser appears.
 Only the drive which has been set in advance is displayed.
 If...

Projecting Data on USB Flash Memory (SX80 II)
120
Description of USB File Browser
If a USB flash memory is connected to the projector, the USB file browser appears.
In the USB file browser, you can select the image file to be projected by operating the file 
list in the USB memory device.
List title
Drive name currently selected
Representation varies depending on the manufacturer and/or model.
Page number of the file list currently displayed
(Current page number/total number of pages)
You can page up and...