Canon Projector SX7 SX6 SX60 SX7000 User Manual
Have a look at the manual Canon Projector SX7 SX6 SX60 SX7000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 68
68
PROJECTING AN IMAGE FROM AV EQUIPMENT
Performing the Auto Setup
With the auto setup function, a series of screen adjustment and settings, such as Auto
focus and Auto keystone is performed automatically when projecting a video image from
an AV equipment. You can start the projection only with this operation if the input signal has
been appropriately selected.
Refer to page 44 for detailed information on items adjusted by performing the auto setup.
1Select [DIGITAL VIDEO].
Perform the steps shown in the...](http://img.usermanuals.tech/thumb/14/98762/w64_projector_manual_3919_d-67.png "Page 68
68
PROJECTING AN IMAGE FROM AV EQUIPMENT
Performing the Auto Setup
With the auto setup function, a series of screen adjustment and settings, such as Auto
focus and Auto keystone is performed automatically when projecting a video image from
an AV equipment. You can start the projection only with this operation if the input signal has
been appropriately selected.
Refer to page 44 for detailed information on items adjusted by performing the auto setup.
1Select [DIGITAL VIDEO].
Perform the steps shown in the...")
![Page 69
69
PROJECTING AN IMAGE FROM AV EQUIPMENT
„Selecting DIGITAL VIDEO
1Press the [INPUT] button.
The [INPUT] window appears.
2Select the top item in the menu with the [INPUT] button.
The selection is toggled through available input signal types from above.
3If [DIGITAL VIDEO] is unavailable from the list at the left, press [>], and then press [ ] /
[ ] to select it from the list at the right.
4Press the [OK] button.
zYou can select any input signal type from all options through the [ ] / [ ] button.](http://img.usermanuals.tech/thumb/14/98762/w64_projector_manual_3919_d-68.png "Page 69
69
PROJECTING AN IMAGE FROM AV EQUIPMENT
„Selecting DIGITAL VIDEO
1Press the [INPUT] button.
The [INPUT] window appears.
2Select the top item in the menu with the [INPUT] button.
The selection is toggled through available input signal types from above.
3If [DIGITAL VIDEO] is unavailable from the list at the left, press [>], and then press [ ] /
[ ] to select it from the list at the right.
4Press the [OK] button.
zYou can select any input signal type from all options through the [ ] / [ ] button.")
![Page 70
70
PROJECTING AN IMAGE FROM AV EQUIPMENT
„Selecting SCART
1Press the [INPUT] button.
The [INPUT] window appears.
2Select the second top item in the menu with the [INPUT] button.
The selection is toggled through available input signals from above.
3If the SCART is unavailable from the list at the left, press [>], and then press [ ] / [ ] to
select the SCART from the list at the right.
4Press the [OK] button.
zSelect [SCART] for Input Terminal-2.
zYou can select any input signal type from all options...](http://img.usermanuals.tech/thumb/14/98762/w64_projector_manual_3919_d-69.png "Page 70
70
PROJECTING AN IMAGE FROM AV EQUIPMENT
„Selecting SCART
1Press the [INPUT] button.
The [INPUT] window appears.
2Select the second top item in the menu with the [INPUT] button.
The selection is toggled through available input signals from above.
3If the SCART is unavailable from the list at the left, press [>], and then press [ ] / [ ] to
select the SCART from the list at the right.
4Press the [OK] button.
zSelect [SCART] for Input Terminal-2.
zYou can select any input signal type from all options...")
![Page 71
71
PROJECTING AN IMAGE FROM AV EQUIPMENT
Selecting a Screen Mode (Aspect)
You can select one of three screen modes depending on the aspect ratio of your AV equip-
ment or content software.
zYou can specify the aspect ratio from the menu. Refer to [Aspect] in the menu (P88,
89).
zThe available screen mode will be different depending on the setting of [Screen
aspect]. Refer to the section [Screen aspect] for details (P72).
„Full screen
Select this to project a video image with aspect
ratio of 4:3.
[Full...](http://img.usermanuals.tech/thumb/14/98762/w64_projector_manual_3919_d-70.png "Page 71
71
PROJECTING AN IMAGE FROM AV EQUIPMENT
Selecting a Screen Mode (Aspect)
You can select one of three screen modes depending on the aspect ratio of your AV equip-
ment or content software.
zYou can specify the aspect ratio from the menu. Refer to [Aspect] in the menu (P88,
89).
zThe available screen mode will be different depending on the setting of [Screen
aspect]. Refer to the section [Screen aspect] for details (P72).
„Full screen
Select this to project a video image with aspect
ratio of 4:3.
[Full...")
![Page 72
72
PROJECTING AN IMAGE FROM AV EQUIPMENT
Selecting Aspect Ratio of the Projecting Image
(Screen aspect)
You can select among three aspect ratios of the projecting image according to the aspect
ratio of the projected screen.
You can project an image on the whole screen by setting [Screen aspect].
zYou can set [Screen aspect] from menu. Refer to the section [Screen aspect] on the
menu for details (P99).
„4:3
Select this when you use a screen with aspect ratio of 4:3.
The following table shows the...](http://img.usermanuals.tech/thumb/14/98762/w64_projector_manual_3919_d-71.png "Page 72
72
PROJECTING AN IMAGE FROM AV EQUIPMENT
Selecting Aspect Ratio of the Projecting Image
(Screen aspect)
You can select among three aspect ratios of the projecting image according to the aspect
ratio of the projected screen.
You can project an image on the whole screen by setting [Screen aspect].
zYou can set [Screen aspect] from menu. Refer to the section [Screen aspect] on the
menu for details (P99).
„4:3
Select this when you use a screen with aspect ratio of 4:3.
The following table shows the...")
![Page 73
73
PROJECTING AN IMAGE FROM AV EQUIPMENT
„16:9 D. image shift
Select this when you use a screen with aspect ratio of 16:9. You can vertically shift or fine-
tune the position of the undistorted image without the keystone adjustment.
Refer to P57 for detailed information on shifting the image.
The following table shows the available [Aspect] mode for each input signal.
Select [4:3] from the [Aspect] menu if you want to project a video image with aspect ratio of
4:3 in this mode (P71).
Input signal...](http://img.usermanuals.tech/thumb/14/98762/w64_projector_manual_3919_d-72.png "Page 73
73
PROJECTING AN IMAGE FROM AV EQUIPMENT
„16:9 D. image shift
Select this when you use a screen with aspect ratio of 16:9. You can vertically shift or fine-
tune the position of the undistorted image without the keystone adjustment.
Refer to P57 for detailed information on shifting the image.
The following table shows the available [Aspect] mode for each input signal.
Select [4:3] from the [Aspect] menu if you want to project a video image with aspect ratio of
4:3 in this mode (P71).
Input signal...")
71 PROJECTING AN IMAGE FROM AV EQUIPMENT Selecting a Screen Mode (Aspect) You can select one of three screen modes depending on the aspect ratio of your AV equip- ment or content software. zYou can specify the aspect ratio from the menu. Refer to [Aspect] in the menu (P88, 89). zThe available screen mode will be different depending on the setting of [Screen aspect]. Refer to the section [Screen aspect] for details (P72). „Full screen Select this to project a video image with aspect ratio of 4:3. [Full screen] will be disappeared from the menu screen if you select [16:9] or [16:9 D. image shift] for [Screen aspect]. „4:3 Select this to project a screen with aspect ratio of 4:3 on the 16:9 screen if you have selected [16:9] or [16:9 D. image shift] for [Screen aspect]. „Wide Select this to project a video image with aspect ratio of 16:9. „Auto ([DIGITAL VIDEO]/[COMPONENT]) Select this to switch between [Normal] and [Wide] automatically in accordance with the video image. zRefer to the table on the page 129 for more detailed information on the screen size for the wide screen. zThe upper, lower, left and right portions of a projected image may be missing depending on the [Aspect] setting.
72 PROJECTING AN IMAGE FROM AV EQUIPMENT Selecting Aspect Ratio of the Projecting Image (Screen aspect) You can select among three aspect ratios of the projecting image according to the aspect ratio of the projected screen. You can project an image on the whole screen by setting [Screen aspect]. zYou can set [Screen aspect] from menu. Refer to the section [Screen aspect] on the menu for details (P99). „4:3 Select this when you use a screen with aspect ratio of 4:3. The following table shows the available [Aspect] mode for each input signal. „16:9 Select this when you use a screen with aspect ratio of 16:9. Select [4:3] from the [Aspect] menu if you want to project a video image with aspect ratio of 4:3 in this mode (P71). The following table shows the available [Aspect] mode for each input signal. Input signal Available [Aspect] mode VIDEO S-VIDEO SCARTFull screen Wide COMPONENT DIGITAL VIDEOFull screen Auto Wide Input signal Available [Aspect] mode VIDEO S-VIDEO SCART4:3 Wide COMPONENT (480i/575i/480p/575p) DIGITAL VIDEO (480p/575p)4:3 Wide COMPONENT DIGITAL VIDEO (720p/1035i/1080i)Wide z[Auto screen color] may not correct the screen color properly. If such is the case, correct it manually. (P96)
73 PROJECTING AN IMAGE FROM AV EQUIPMENT „16:9 D. image shift Select this when you use a screen with aspect ratio of 16:9. You can vertically shift or fine- tune the position of the undistorted image without the keystone adjustment. Refer to P57 for detailed information on shifting the image. The following table shows the available [Aspect] mode for each input signal. Select [4:3] from the [Aspect] menu if you want to project a video image with aspect ratio of 4:3 in this mode (P71). Input signal Available [Aspect] mode VIDEO S-VIDEO SCART4:3 Wide COMPONENT (480i/575i/480p/575p) DIGITAL VIDEO (480p/575p)4:3 Wide COMPONENT DIGITAL VIDEO (720p/1035i/1080i)Wide zKeystone adjustment will be disabled. Project the image at right angle to the screen. z[Auto focus], [Auto keystone], and [Auto screen color] are disabled in the [Auto setup] func- tion. zYou cannot register the image for [Projector on] or [No signal screen]. z[SPOT] will be disabled.
Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION
76 USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Useful Functions Available During a Presentation Blackened Out an Image Temporarily XUseful when: XYou finished the presentation. XYou want to divert attendees attention from the screen. Blacken out the image temporarily. Blackening out an Image The screen changes to black or blue. Showing the Image Again Press the button to show the image again. Muting the Sound XUseful when: XYou want to immediately mute the sound from the projector. Mute the sound temporarily. Muting the Sound The projector shows the [MUTE] icon on the screen. Canceling the MUTE function Press the button again to cancel the MUTE function. Pressing the button also cancels the MUTE function. zYou can capture a specified logo (P96). zYou can show a logo such as a com- pany logo while blackening out the image (P98). zThe (middle) LED illumination lamp on the top control flush slowly while blackening out the image. zA guiding message appears if you press an invalid button while the NO SHOW function is on. zThe lamp keeps a turn-on state while the NO SHOW function is on. zFor SX7/X700, you can also mute the audio with the same operation when you output the audio to the external audio-visual equipment.
77 USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Freezing the Picture XUseful when: XYou want to perform a computer opera- tion which is irrelevant to the proceed- ings of the presentation. XYou want to stop a moving image. Freeze the moving image. Freezing an Image The FREEZE message is shown on the screen. Canceling the FREEZE function Press the button again to cancel the FREEZE function. Adjusting the Volume XUseful when: XYou want to adjust the volume level of the projectors speaker. Adjusting the Volume Volume bar appears on the screen. zYou can expand or reduce the frozen image (P79). zThe (left and right) LED illumination lamps on the top control flushes slowly while stopping the image. zA guiding message appears if you press an invalid button while the FREEZE function is on. zAdjust the volume or mute setting on the computer if the volume level is too low. zFor SX7/X700, you can also adjust the volume level with the same operation when you output the audio to the external audio-visual equipment.
78 USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Showing the Elapsed Time XUseful when: XYou want to manage the proceedings of the presentation. The elapsed time from 00:00 to 59:59 is displayed at the lower right corner of the screen. Starting the Countdown Press this button once to display the timer and start counting. Stopping the Countdown Press the button again to stop the countdown. Canceling the Countdown Press the button again to disappear the timer. Page Up or Down through the Pages XUseful when: XYou want to page up or down through the projected application pages with the remote control. You can page up or down in the projected application with the supplied remote con- trol. Page Up Page Down zThis function acts as the Page Up and Page Down keys on the computer keyboard. You can not use this func- tion depending on the application.
79 USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Zooming an Image XUseful when: XZoom in an object such as a small graph during a presentation. XMoving unnecessary information off the screen to focus on the current subject. Zoom the projected image. Zooming In an Image Press this button repeatedly until the image becomes the desired size. Moving an Image to the Desired Position If the image you want to zoom in stays out of the screen or out of the center of the screen, you can move it to the desired position. Zooming Out an Image Press this button repeatedly until the image becomes the desired size. You can restore the original size of the image by pressing the [OK] button. zThe magnification appears on the screen when you press the [D.ZOOM] button. zThe zoom ratio is 1x to 12x. zYou can freeze the enlarged image. zPress the [OK] button to cancel the digital zoom function. zThe following guiding message appears if you press an invalid button during operating the digital zoom function.
80 USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Operating a Mouse with the Remote Control XUseful when: XYou want to operate a mouse with the remote control. You can use the supplied remote control as the wireless mouse for your computer. Connecting a USB Cable Make sure that both the computer and pro- jector are turned off, and then connect the supplied USB cable between the USB ter- minals on the computer and the projector. Moving the Cursor You can move the mouse cursor vertically and horizontally. Using the Left Button of the Mouse You can click, double-click, or drag an object with this button. Using the Right Button of the Mouse USB terminal USB cableComputer Projector USB terminal zThis function is supported on Windows Vista, Windows XP, or Mac OS 9.2 and later.