Canon projector REALiS SX800 User Manual

							71 Useful Functions Available During a Presentation
Useful Functions Available During a Presentation
Adjusting the Volume
Useful when:
 You want to adjust the volume level of the pro-
jectors or external speaker.
Press the   button. The following screen 
appears.
 You can also adjust the volume level 
with [] of the projector.
 Adjust the volume or mute setting on the 
computer if the volume level is too low.
 You can also adjust the volume level of 
the speakers connected via the audio 
output terminal.
Muting the Sound
Useful when:
 You want to temporality mute the unnecessary 
sound.
 You want to immediately mute the sound.
Press the   button to mute the sound. 
The projector shows the following icon.
Press the   button again to cancel the 
MUTE function.
 You can also mute the sound of the 
speakers connected via the audio out-
put terminal.
Remote controlRemote control 
						

							Useful Functions Available During a Presentation
72
Zooming an Image
Useful when:
 Zoom in an object such as a small graph dur-
ing a presentation (up to 12x).
 Focusing on the current subject.
Press the   button. A part of the image is 
enlarged each time pressed.
 The magnification appears on the 
screen.You can move the area to the enlarged by 
using [ ] / [ ] / [].
You can restore the original size of the 
image by pressing the   button.
Remote control

						

							73 Useful Functions Available During a Presentation
Useful Functions Available During a Presentation
Showing the Elapsed Time
Useful when:
 You want to manage the proceedings of the 
presentation.
Press the   button to start counting.
 The elapsed time is displayed at the 
lower right corner of the screen.
 Time is counted up to 59:59. Then the 
timer returns to 00:00.
Press the   button again to stop the 
timer.
 Press the   button while the timer is 
stopped. The timer disappears from the 
screen.
Then press the   button to start count-
ing from 00:00.
Projecting Image Without Com-
puter (SX80 II)
Useful when:
 You want to project an image from a digital 
camera.
 You want to project an image from USB flash 
memory.
You can project an image directly by con-
necting the projector with a PictBridge-
compatible digital camera or USB flash 
memory.
Remote controlDigital camera
USB flash memory Refer to P114 – P117.
Refer to P118 – P124. 
						

							74 
						

							75
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory (SX80 II)
Connecting the Projector to Network (SX80 II)
Appendix
Index
Setting 
Functions from 
Menus 
						

							76
How to Use Menus
With a menu, you can set the operation of the projector in detail.
■Menu Configuration
The menu screen is divided into four tabs as follows:
Input Signal Types for which a Menu Item is Displayed
Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which the 
menu item is displayed is indicated as follows:
The following is for SX80 MarkII.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal for which the menu item is displayed
Input signal for which the menu item is not displayed
[System settings] tab (P103)
You can set the operation of the 
projector.[Display settings] tab (P79)
You can set the type of signal or the 
method of projection of the images 
input.
[Image adjustment] tab (P93)
You can adjust the image quality 
and colors as you like.[Information] tab (P112)
You can confirm the information about 
the signal types of the images pro-
jected and other projector-specific 
information.
Menu itemsContents of menu 
						

							How to Use Menus
77
Setting Up Functions from Menus
■Basic Operation of Menu
1Press the MENU button to display a menu window.
2Use [] to select a tab.
 If the tab position is not highlighted in orange, use [ ] / [ ] to move the highlight to 
the top.
3Use [ ] / [ ] to select a item.
Remote controlTop control
Remote controlTop control

						

							How to Use Menus
78
4Select contents.
How to select the contents varies depending on items.
Selection from a list Example: Aspect
With [] Example: Contrast
In a different screen (1) Example: Menu position
In a different screen (2) Example: Tracking
5Press the MENU button, and the menu screen disappears.
1. Press the OK button or [>], and a list of the 
contents is displayed.
2. Use [ ] / [ ] to select contents.
3. If you found the contents you desired, 
press the OK button or [>].

						

							79
Setting Up Functions from Menus
Setting Display Status
Selecting an Image Projection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of image.
 Different contents are displayed for dif-
ferent screen aspects or input signal 
types.
The ASPECT button on the remote con-
trol can also be used to select the 
Aspect settings.
Press the OK button to accept your setting 
and then press the MENU button.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
AutoAn image is projected at an aspect 
ratio of the input signal. Select this 
mode for normal image projection.
4:3An image is projected at an aspect 
ratio of 4:3. Select this if an image of 
4:3 aspect ratio cannot be appropri-
ately projected in the [AUTO] mode.
16:9An image is projected at an aspect 
ratio of 16:9. Select this if an image of 
16:9 aspect ratio cannot be appropri-
ately projected in the [AUTO] mode.
Aspect
Display settings
ZoomAn image with 4:3 aspect ratio is pro-
jected in the center of the screen 
enlarged in 16:9 aspect ratio with the 
upper and lower portion of the image 
cut off. Select this when projecting 
visual software having aspect ratio of 
4:3 and black belts at the top and 
bottom of the image.
 This mode is available when you 
select [16:9] or [16:9 D. image 
shift] for [Screen aspect] and 
select [HDMI (576p, 480p) (SX80 
II)], [COMPONENT (576p, 480p, 
576i, 480i)], [VIDEO] or [S-VIDEO 
(SX80 II)] for input signal.
True sizeAn image is projected with the origi-
nal resolution of the input signal. 
Select this to clearly project com-
puter screen images having a resolu-
tion SXGA+ or lower (VGA, SVGA, 
XGA or SXGA) or visual software hav-
ing a resolution lower than 1035i.
 This mode is available when you 
select [HDMI (720p, 576p, 480p) 
(SX80 II)] or [COMPONENT (720p, 
576p, 480p)] for input signal.
 It is not available for an image hav-
ing a resolution higher than 
SXGA+ or visual software having a 
resolution of 1080i, 1080p, 1035i, 
576i or 480i.
 It is also available if the input sig-
nal is [ANALOG PC-1], [ANALOG 
PC-2], or [DIGITAL PC (SX80 II)]; 
however, it may not be available 
depending on the screen aspect 
setting.
 [Auto] and [True size] are not available 
if the input signal type is [VIDEO].
 [Auto] is automatically selected if the 
input signal type is [USB]. (SX80 II) 
						

							Setting Display Status
80
Selecting an Input Signal Type (ANALOG 
PC)
[Input signal select]
You can select a proper resolution if auto 
PC adjustment function (P57) cannot 
project a correct image from a computer.
Press the OK button to accept your setting 
and then press the MENU button.
Select an input signal corresponding to 
the resolution of the computer.
 For the signal types supported by the 
projector, see the table on page 150.
Selecting an Input Signal Type (VIDEO/S-
VIDEO*)
[Input signal select]
* is only applicable to SX80 MarkII
You can select a proper signal type if a 
video image from your AV equipment is 
not projected correctly.
Press the OK button to accept your setting 
and then press the MENU button.
 [Auto] is the factory default.
 Refer to the Users Manual of your AV 
equipment connected to the projector to 
confirm the input signal type.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal select
Display settings
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Input signal select
Display settings