Canon projector REALiS SX6000 Pprojector Ro AV User Manual
Here you can view all the pages of manual Canon projector REALiS SX6000 Pprojector Ro AV User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
131
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lens Shift Reset
[Lens shift Reset]
Resets the lens shift (P74) setting to the
standard position.
MENU > [System settings] > [Other settings] >
[Lens shift Reset]
MENU > [Install settings] > [Lens shift Reset]
Select [Lens shift Reset] and press the OK
button. The following screen for confirma-
tion appears.
Use the [ ]
/ [ ] buttons to select the
standard position, and then select OK.
The standard position varies depending...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-130.png "Page 131
131
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lens Shift Reset
[Lens shift Reset]
Resets the lens shift (P74) setting to the
standard position.
MENU > [System settings] > [Other settings] >
[Lens shift Reset]
MENU > [Install settings] > [Lens shift Reset]
Select [Lens shift Reset] and press the OK
button. The following screen for confirma-
tion appears.
Use the [ ]
/ [ ] buttons to select the
standard position, and then select OK.
The standard position varies depending...")
131 Setting Various Functions User’s ManualSettin g Functions from Menus Lens Shift Reset [Lens shift Reset] Resets the lens shift (P74) setting to the standard position. MENU > [System settings] > [Other settings] > [Lens shift Reset] MENU > [Install settings] > [Lens shift Reset] Select [Lens shift Reset] and press the OK button. The following screen for confirma- tion appears. Use the [ ] / [ ] buttons to select the standard position, and then select OK. The standard position varies depending...
Page 132
![Page 132
Setting Various Functions
132
Extending the Menu Dis-
play Time
[Menu display time]
The setting for the menu display time can
be extended from the normal 10 or 30 sec-
onds to 3 minutes. For the WUX5000 /
WUX4000, if [Extended] is set, when push-
ing and holding a button on the projector or
remote control, the same key repeat func-
tion will be enabled as when pressing a
button repeatedly.
MENU > [System settings] > [Other settings] >
[Menu display time]
MENU > [Install settings] > [On screen] >...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-131.png "Page 132
Setting Various Functions
132
Extending the Menu Dis-
play Time
[Menu display time]
The setting for the menu display time can
be extended from the normal 10 or 30 sec-
onds to 3 minutes. For the WUX5000 /
WUX4000, if [Extended] is set, when push-
ing and holding a button on the projector or
remote control, the same key repeat func-
tion will be enabled as when pressing a
button repeatedly.
MENU > [System settings] > [Other settings] >
[Menu display time]
MENU > [Install settings] > [On screen] >...")
Setting Various Functions 132 Extending the Menu Dis- play Time [Menu display time] The setting for the menu display time can be extended from the normal 10 or 30 sec- onds to 3 minutes. For the WUX5000 / WUX4000, if [Extended] is set, when push- ing and holding a button on the projector or remote control, the same key repeat func- tion will be enabled as when pressing a button repeatedly. MENU > [System settings] > [Other settings] > [Menu display time] MENU > [Install settings] > [On screen] >...
Page 133
![Page 133
133
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the High
Temperature Warning Icon
[Overheat Warning Display]
You can select whether or not to display
the [High temperature warning] icon when
the temperature inside the projector has
increased and is approaching the overheat
temperature.
MENU > [System settings] > [Other settings] >
[Overheat Warning Display]
MENU > [Install settings] > [On screen] > [Over-
heat warning display]
Press the OK button to accept...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-132.png "Page 133
133
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Showing / Hiding the High
Temperature Warning Icon
[Overheat Warning Display]
You can select whether or not to display
the [High temperature warning] icon when
the temperature inside the projector has
increased and is approaching the overheat
temperature.
MENU > [System settings] > [Other settings] >
[Overheat Warning Display]
MENU > [Install settings] > [On screen] > [Over-
heat warning display]
Press the OK button to accept...")
133 Setting Various Functions User’s ManualSettin g Functions from Menus Showing / Hiding the High Temperature Warning Icon [Overheat Warning Display] You can select whether or not to display the [High temperature warning] icon when the temperature inside the projector has increased and is approaching the overheat temperature. MENU > [System settings] > [Other settings] > [Overheat Warning Display] MENU > [Install settings] > [On screen] > [Over- heat warning display] Press the OK button to accept...
Page 134
![Page 134
Setting Various Functions
134
Reducing Flickering
[Deflicker]
This function adjusts the image display in
order to reduce flickering in the projected
image.
MENU > [System settings] > [Other settings] >
[Deflicker]
• When deflicker is performed, the image adjustment screen is projected for approx-
imately 20 seconds.
To cancel deflicker, press the POWER
button.
Gamma Restore
[Gamma restore]
This function is used when changing and
turning of the tone characteristics and ach-
romatic color is...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-133.png "Page 134
Setting Various Functions
134
Reducing Flickering
[Deflicker]
This function adjusts the image display in
order to reduce flickering in the projected
image.
MENU > [System settings] > [Other settings] >
[Deflicker]
• When deflicker is performed, the image adjustment screen is projected for approx-
imately 20 seconds.
To cancel deflicker, press the POWER
button.
Gamma Restore
[Gamma restore]
This function is used when changing and
turning of the tone characteristics and ach-
romatic color is...")
Setting Various Functions 134 Reducing Flickering [Deflicker] This function adjusts the image display in order to reduce flickering in the projected image. MENU > [System settings] > [Other settings] > [Deflicker] • When deflicker is performed, the image adjustment screen is projected for approx- imately 20 seconds. To cancel deflicker, press the POWER button. Gamma Restore [Gamma restore] This function is used when changing and turning of the tone characteristics and ach- romatic color is...
Page 135
![Page 135
135
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lamp Warning Display
[Lamp warning display]
A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.
MENU > [Install settings] > [On screen] > [Lamp
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Regardless of the [Lamp warning display]
setting,...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-134.png "Page 135
135
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Lamp Warning Display
[Lamp warning display]
A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.
MENU > [Install settings] > [On screen] > [Lamp
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Regardless of the [Lamp warning display]
setting,...")
135 Setting Various Functions User’s ManualSettin g Functions from Menus Lamp Warning Display [Lamp warning display] A message that advises you to change the lamp can be set to display when the lamp has been used for the specified period of time. MENU > [Install settings] > [On screen] > [Lamp warning display] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [On]. Regardless of the [Lamp warning display] setting,...
Page 136
![Page 136
Setting Various Functions
136
Select [Lamp counter] and press the OK
button to display the lamp counter.
Select [Reset] and press the OK button.
Select [OK] on the screen for confirmation
and press the OK button to reset the lamp
counter.
Press the MENU button or EXIT button
(WX6000 / SX6000).
■About the Display of the Lamp
Counter
The lamp counter displays the hours of
use of the lamp in the following way.
Less than 2,700 hours
Displayed as a green bar.
2,700 hours to less than 3,000 hours...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-135.png "Page 136
Setting Various Functions
136
Select [Lamp counter] and press the OK
button to display the lamp counter.
Select [Reset] and press the OK button.
Select [OK] on the screen for confirmation
and press the OK button to reset the lamp
counter.
Press the MENU button or EXIT button
(WX6000 / SX6000).
■About the Display of the Lamp
Counter
The lamp counter displays the hours of
use of the lamp in the following way.
Less than 2,700 hours
Displayed as a green bar.
2,700 hours to less than 3,000 hours...")
Setting Various Functions 136 Select [Lamp counter] and press the OK button to display the lamp counter. Select [Reset] and press the OK button. Select [OK] on the screen for confirmation and press the OK button to reset the lamp counter. Press the MENU button or EXIT button (WX6000 / SX6000). ■About the Display of the Lamp Counter The lamp counter displays the hours of use of the lamp in the following way. Less than 2,700 hours Displayed as a green bar. 2,700 hours to less than 3,000 hours...
Page 137
![Page 137
137
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Filter Warning Display
[Filter warning display]
A message advising you to perform clean-
ing can be set to display when the filter
needs cleaning.
MENU > [Install settings] > [On screen] > [Filter
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Resetting the Air Filter
Counter
[Filter counter]
This resets the counter which...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-136.png "Page 137
137
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Filter Warning Display
[Filter warning display]
A message advising you to perform clean-
ing can be set to display when the filter
needs cleaning.
MENU > [Install settings] > [On screen] > [Filter
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [On].
Resetting the Air Filter
Counter
[Filter counter]
This resets the counter which...")
137 Setting Various Functions User’s ManualSettin g Functions from Menus Filter Warning Display [Filter warning display] A message advising you to perform clean- ing can be set to display when the filter needs cleaning. MENU > [Install settings] > [On screen] > [Filter warning display] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [On]. Resetting the Air Filter Counter [Filter counter] This resets the counter which...
Page 138
![Page 138
Setting Various Functions
138
Displaying Test Pattern
[Test pattern]
A test pattern for checking the resolution
and color when installing the projector can
be displayed.
MENU > [Install settings] > [Test pattern]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [Off].
While the test pattern is displayed, you can
use the
[] / [] buttons to change to a dif-
ferent test pattern. Also, if a test pattern has
option...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-137.png "Page 138
Setting Various Functions
138
Displaying Test Pattern
[Test pattern]
A test pattern for checking the resolution
and color when installing the projector can
be displayed.
MENU > [Install settings] > [Test pattern]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
The factory default is [Off].
While the test pattern is displayed, you can
use the
[] / [] buttons to change to a dif-
ferent test pattern. Also, if a test pattern has
option...")
Setting Various Functions 138 Displaying Test Pattern [Test pattern] A test pattern for checking the resolution and color when installing the projector can be displayed. MENU > [Install settings] > [Test pattern] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). The factory default is [Off]. While the test pattern is displayed, you can use the [] / [] buttons to change to a dif- ferent test pattern. Also, if a test pattern has option...
Page 139
![Page 139
139
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Selecting Audio In Termi-
nal
[Audio in terminal select]
You can select the audio in terminal that is
used for each input signal (HDMI, Digital
PC, Analog PC-1, Analog PC-2, Compo-
nent).
MENU > [Install settings] > [Audio in terminal
select]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default is as follows.
HDMI: HDMI
Digital PC: Audio in 2
Analog...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-138.png "Page 139
139
Setting Various Functions
User’s ManualSettin
g Functions from Menus
Selecting Audio In Termi-
nal
[Audio in terminal select]
You can select the audio in terminal that is
used for each input signal (HDMI, Digital
PC, Analog PC-1, Analog PC-2, Compo-
nent).
MENU > [Install settings] > [Audio in terminal
select]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default is as follows.
HDMI: HDMI
Digital PC: Audio in 2
Analog...")
139 Setting Various Functions User’s ManualSettin g Functions from Menus Selecting Audio In Termi- nal [Audio in terminal select] You can select the audio in terminal that is used for each input signal (HDMI, Digital PC, Analog PC-1, Analog PC-2, Compo- nent). MENU > [Install settings] > [Audio in terminal select] Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). • The factory default is as follows. HDMI: HDMI Digital PC: Audio in 2 Analog...
Page 140
![Page 140
Setting Various Functions
140
Resetting to the Default Setting
[Factory defaults]
You can reset the menu item settings and
restore the system settings to the factory
defaults.
MENU > [System settings] > [Other settings] >
[Factory defaults]
MENU > [System settings] > [Other settings] >
[Factory defaults]
Select [Factory defaults] and press the OK
button. The following screen for confirma-
tion appears.
This function does not reset the values for
[Lamp counter], [Language], [Remote con-
trol],...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-139.png "Page 140
Setting Various Functions
140
Resetting to the Default Setting
[Factory defaults]
You can reset the menu item settings and
restore the system settings to the factory
defaults.
MENU > [System settings] > [Other settings] >
[Factory defaults]
MENU > [System settings] > [Other settings] >
[Factory defaults]
Select [Factory defaults] and press the OK
button. The following screen for confirma-
tion appears.
This function does not reset the values for
[Lamp counter], [Language], [Remote con-
trol],...")
Setting Various Functions 140 Resetting to the Default Setting [Factory defaults] You can reset the menu item settings and restore the system settings to the factory defaults. MENU > [System settings] > [Other settings] > [Factory defaults] MENU > [System settings] > [Other settings] > [Factory defaults] Select [Factory defaults] and press the OK button. The following screen for confirma- tion appears. This function does not reset the values for [Lamp counter], [Language], [Remote con- trol],...