Canon projector REALiS SX60 User Manual

							
MULTIMEDIA PROJECTOR
Table of contents/Safety Instructions
Before Use
Setting Up the Projector
Projecting an Image from the Computer
Projecting an Image from AV Equipment
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Maintenance
Troubleshooting
Appendix
Index
User’s Manual
ENG 
						

							2
Quick Reference – How to start projection
Computer
1.Install the projector. P32-33
zInstall the projector at the desired distance from the screen.
2.Connect the projector. P36-39
zConnect the projector and the computer with a cable.
3.Turn on the projector. P40-41
zConnect the power cord and turn on the projector.
zAdjust the height of the projecting image (P43).
zSelect a display language when turning on the projector for the first time (P41).
4.Press the   button twice. P46-47
zAdjust the focus of the screen.
5.Set up the computer. P44-45
zTurn on the computer and set the resolution.
6.Select the input signal by pressing the   button. P48-50
zSelect an appropriate input signal in accord with the signal from the computer.
7.Press the   button twice again. P46-47
zAdjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
8.Press the   button. P54
zOptimize the input signal with the auto PC function (Skip this step if the projector
is projecting an image properly.)
9.Select the image mode with the   button. P55-56
zSelect an appropriate image mode for projection.
zSpecify the aspect ratio or display area in the [Aspect] menu as required (P57,
90).
10.Start the presentation. P78-83
zSet the useful functions available during the presentation from the remote control.
Turn off the projector P60-61
zTurn off the projector and unplug the power cord.
Finishing the projection... 
						

							3
AV Equipment
1.Install the projector. P32-33
zInstall the projector at the desired distance from the screen.
zInstall batteries in the remote control (P29)
2.Connect the projector. P64-68
zConnect the projector and the AV equipment with a cable* (see P38, 39 for the
instruction on connecting a audio cable).
3.Turn on the projector. P40-41
zConnect the power cord and turn on the projector.
zAdjust the height of the projecting image (P43).
zSelect a display language when turning on the projector for the first time (P41).
4.Press the   button twice. P46-47
zAdjust the focus of the screen.
5.Set up the AV equipment.
zTurn on the AV equipment and play the video image.
6.Select the input signal by pressing the   button. P70-72
zSelect DIGITAL VIDEO as the input signal for a digital video image.* 
For the other video image, go to step 7.
7.Press the   button twice again. P70
zAdjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
8.Select the image mode with the   button. P55-56
zSelect an appropriate image mode for projection.
zSpecify the aspect ratio or display area in the [Aspect] menu as required (P73,
90, 91).
Turn off the projector P60-61
zTurn off the projector and unplug the power cord.
* Connect the projector and the AV equipment with a HDMI/DVI cable to project a digital video
image (P65).
Finishing the projection... 
						

							4
TABLE OF CONTENTS
Table of Contents
Quick Reference – How to start projection ............................................................. 2
Table of Contents ................................................................................................... 4
Safety Instructions .................................................................................................. 7
Safety Precautions............................................................................................................ 8
AC Power Cord Requirement ......................................................................................... 11
Federal Communication Commission Notice ................................................................. 12
Canadian Radio Interference Regulations ..................................................................... 12
Precautions on Handling the Batteries in the Remote Controller ................................... 13
Lamp Handling Precautions ........................................................................................... 13
Carrying/Transporting the Projector ............................................................................... 14
Installation Precautions .................................................................................................. 14
Features of the Multimedia Projector SX7 MarkII/SX60 ....................................... 16
Supplied Manuals and Symbols Used in This Manual ......................................... 17
Supplied Manuals........................................................................................................... 17
Before Use ........................................................................................................... 20
Supplied Accessories .................................................................................................... 20
Part Names .....................................................................................................................22
Preparing the Remote Control ........................................................................................ 29
Setting Up the Projector ....................................................................................... 32
Determining the Distance to the Screen ........................................................................ 32
Determining the Installation Position .............................................................................. 33
Projecting an Image from the Computer .............................................................. 36
Connecting the Projector to the Computer..................................................................... 36
Starting Projection .......................................................................................................... 40
Adjusting the Image ....................................................................................................... 42
Preparing the Computer ................................................................................................. 44
Performing the Auto Setup ............................................................................................. 46
Adjusting the Focus........................................................................................................ 51
Adjusting Keystone Distortion ........................................................................................ 52
Setting Up the Computer Screen Automatically (AUTO PC).......................................... 54
Selecting an Image Mode (IMAGE) ............................................................................... 55
Selecting a Screen Mode (Aspect) ................................................................................ 57
Selecting Aspect Ratio of the Projecting Image (Screen aspect) .................................. 59
Turning Off the Projector ................................................................................................ 60
Projecting an Image from AV Equipment ............................................................. 64
Connecting the Projector to an AV Equipment............................................................... 64
Projecting a Video Image from an AV Equipment .......................................................... 69
Performing the Auto Setup ............................................................................................. 70
Selecting a Screen Mode (Aspect) ................................................................................ 73
Selecting Aspect Ratio of the Projecting Image (Screen aspect) .................................. 74 
						

							5
TABLE OF CONTENTS
Useful Functions Available During a Presentation ............................................... 78
Blackened Out an Image Temporarily ........................................................................... 78
Freezing the Picture ....................................................................................................... 78
Muting the Sound ........................................................................................................... 79
Adjusting the Volume ..................................................................................................... 79
Showing the Elapsed Time ............................................................................................. 80
Page Up or Down through the Pages ............................................................................ 80
Zooming an Image ......................................................................................................... 81
Operating a Mouse with the Remote Control ................................................................. 82
Pointing with a Spotlight ................................................................................................. 83
Setting Up Functions from Menus ........................................................................ 86
How to Use Menus ......................................................................................................... 86
Setting Display Status .......................................................................................... 90
Selecting a Screen Mode (1).......................................................................................... 90
Selecting a Screen Mode (2).......................................................................................... 90
Selecting a Screen Mode (3).......................................................................................... 91
Selecting an Input Signal Type (1) ................................................................................. 91
Selecting an Input Signal Type (2) ................................................................................. 92
Selecting an Input Signal Type (3) ................................................................................. 92
Adjusting the Total Number of Dots ............................................................................... 93
Adjusting the Tracking ................................................................................................... 93
Adjusting the Horizontal Position.................................................................................... 94
Adjusting the Vertical Position ........................................................................................ 94
Adjusting the Number of Horizontal Pixels ..................................................................... 95
Adjusting the Number of Vertical Pixels ......................................................................... 95
Performing Progressive Processing ............................................................................... 96
Selecting a Menu Position .............................................................................................. 96
Performing the Ceiling-mounted/Rear Projection ........................................................... 97
Correcting the Screen Color........................................................................................... 98
Capturing a Logo to Be Projected (SX60) ...................................................................... 98
Selecting a Logo Display Position (SX60) ...................................................................... 99
Displaying a Logo (No signal screen) ............................................................................ 99
Displaying a Logo (NO SHOW) .................................................................................... 100
Selecting a Logo at Startup .......................................................................................... 100
Selecting Aspect Ratio of the Screen........................................................................... 101
Setting the Image Quality ................................................................................... 102
Selecting an Image Mode ............................................................................................ 102
Adjusting the Brightness .............................................................................................. 103
Adjusting the Contrast .................................................................................................. 103
Adjusting the Sharpness .............................................................................................. 104
Making a Gamma Correction ....................................................................................... 104
Making Color Adjustment (1) (SX7 II) ........................................................................... 105
Making Color Adjustment (2)........................................................................................ 105
Making Color Adjustment (3)........................................................................................ 106
Making Advanced Color Adjustment (1) ...................................................................... 106 
						

							6
TABLE OF CONTENTS
Making Advanced Color Adjustment (2) ...................................................................... 107
Making Advanced Color Adjustment (3) ...................................................................... 107
Correcting the Image According to the Ambient Light (SX7 II) ................................... 108
Reducing the Lamp Brightness.................................................................................... 109
Resetting the Image Settings ....................................................................................... 110
Setting Various Function .................................................................................... 111
Setting Auto Setup Function ......................................................................................... 111
Selecting the Power Management Mode ..................................................................... 111
Skip the POWER Button Operation .............................................................................. 112
Enabling/Disabling the Beep........................................................................................ 112
Selecting a Display Language ..................................................................................... 113
Prohibiting the Projector Operation .............................................................................. 114
Enabling/Disabling the Guide Message....................................................................... 114
Turning On/Off the LED Illumination ............................................................................. 115
Setting up the Remote Control ..................................................................................... 115
Setting up the Digital Video Input Signal ..................................................................... 116
Setting a Password....................................................................................................... 116
Registering a Password ............................................................................................... 117
Resetting to the Default Setting .................................................................................... 117
Resetting the Lamp Counter ........................................................................................ 118
Maintenance ....................................................................................................... 120
Cleaning the Projector .................................................................................................. 120
Cleaning and Replacing the Air Filter .......................................................................... 121
Replacing the Lamp ..................................................................................................... 122
Troubleshooting.................................................................................................. 126
WARNING Lamp Flash Patterns................................................................................... 126
Symptoms and Solutions .............................................................................................. 127
Appendix ............................................................................................................ 132
Supported Computer Signal Types .............................................................................. 132
Relationship between Screen Size and Projecting Distance ....................................... 133
Glossary .......................................................................................................................134
Specifications ............................................................................................................... 138
Index .................................................................................................................. 140
Menu Configuration ............................................................................................ 144 
						

							7
SAFETY INSTRUCTIONS
Safety Instructions
Before operating this projector, read this manual thoroughly in order to operate the
projector properly.
This projector offers many convenient features and functions. Operating the projector
properly enables you to manage those features and maintain it in good condition for a long
period.
Improper operation may result in not only reducing the product-life, but also malfunctions,
fire hazards, or other accidents.
If your projector is not operating correctly, read this manual again, check operations and
cable connections, and try the solutions shown in the Troubleshooting section at the end
of this booklet. If the problem still persists, contact the service center or the dealer where
you purchased the projector.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMPS.  REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUT-
ING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS FOR THIS UNIT IN THE OWNERS
MANUAL.
CAUTION
Not for use in a computer room as defined in the Standard for the Protection of Electronic
Computer/Data Processing Equipment, ANSI/NFPA 75.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN 
						

							8
SAFETY INSTRUCTIONS
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
zThis projector projects intense light from the projection lens. Do not stare directly into
the lens if possible, as doing so may result in eye damage. Be especially careful that
children do not stare directly into the beam.
zInstall the projector in an appropriate position.
Installing the projector in an inappropriate position may result in a fire hazard.
zAllow for appropriate space above beside and behind of the projector cabinet for
allowing air circulation and cooling of the projector. Minimum clearances must be
maintained. If the projector is to be built into a compartment or similarly space, the
minimum distances must be maintained. Do not cover the ventilation slot on the
projector. Heat build-up can reduce the service life of your projector, and can also be
dangerous.
zDo not put any flammable objects or spray cans near the projector, as the hot air
exhausted from the ventilation holes may result in an explosion.
zIf the projector is not to be used for an extended period of time, unplug it from the
power outlet.
SIDE and TOP REAR
1 m (3.3) 1 m (3.3) 1 m (3.3)1 m (3.3) 
						

							9
SAFETY INSTRUCTIONS
READ AND KEEP THIS OWNERS MANUAL FOR LATER USE.
All the safety and operating instructions should be read before beginning to operate the
product.
Read all of the instructions given here and retain them for later use. Unplug this projector
from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the
projector. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For added protection of the projector during a lightning storm, or when it is left unattended
or unused for long periods of time, unplug it from the wall outlet. This will prevent damage
due to lightning and power surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a
swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may result in
hazards.
Do not place this projector on an unstable cart, stand, or table. The projector may fall,
causing serious injury to a child or adult, and serious damage to the projector. Use only
with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or
shelf mounting should be carried out in accordance with the manufacturers directions, and
should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care.
Sudden stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided
for ventilation, to insure reliable operation of the equipment and to
protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom
opening should not be blocked by placing the projector on a bed, sofa, rug, or other
similar surface. This projector should never be placed near or over a radiator or heat
register.
This projector should not be placed in a built-in installation such as a book case unless
proper ventilation is provided. 
						

							10
SAFETY INSTRUCTIONS
Never push objects of any kind into this projector through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind onto the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated using only the type of power source indicated on the
marking label.  If you are not sure of the type of power supplied, consult your authorized
dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock.
Do not allow anything to rest on the power cord.  Do not locate this projector where the
cord may be damaged by people walking on it.
Do not attempt to service this projector yourself as opening or removing covers may
expose you to dangerous voltages or other hazards.  Refer all servicing to qualified service
personnel.
Unplug this projector from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally after following the operating instructions.
Adjust only those controls that are covered in the operating instructions as improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the projector to normal operating condition.
e. If the projector has been dropped or the cabinet has been damaged.
f. When the projector exhibits a distinct change in performance-this indicates a need for
servicing.
When replacement parts are required, be sure the service technician uses replacement
parts specified by the manufacturer that have the same characteristics as the original
parts.  Unauthorized substitutions may result in fire, electric shock, or injury.
Upon completion of any service or repairs to this projector, ask the service technician to
perform routine safety checks to determine that the projector is in safe operating condition.