Canon projector REALiS SX60 User Manual
Here you can view all the pages of manual Canon projector REALiS SX60 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
91
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Screen Mode (3)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (1)
[Input signal select]
You can select a desired input signal type if the
auto PC adjustment function detects more than
one input signal types.
T
T
Select an input signal type suitable for the com-
puter from the displayed signal types.
Press the [MENU] button...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-90.png "Page 91
91
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Screen Mode (3)
[Aspect]
You can adjust the aspect ratio of the image pro-
jected on the screen.
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (1)
[Input signal select]
You can select a desired input signal type if the
auto PC adjustment function detects more than
one input signal types.
T
T
Select an input signal type suitable for the com-
puter from the displayed signal types.
Press the [MENU] button...")
91 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Selecting a Screen Mode (3) [Aspect] You can adjust the aspect ratio of the image pro- jected on the screen. T T Press the [MENU] button when you finish. Selecting an Input Signal Type (1) [Input signal select] You can select a desired input signal type if the auto PC adjustment function detects more than one input signal types. T T Select an input signal type suitable for the com- puter from the displayed signal types. Press the [MENU] button...
Page 92
![Page 92
92
SETTING UP FUNCTIONS FROM MENUS
Selecting an Input Signal Type (2)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly (irregular color or no image).
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (3)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly.
T
T
Press the [MENU] button when you finish.
Display...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-91.png "Page 92
92
SETTING UP FUNCTIONS FROM MENUS
Selecting an Input Signal Type (2)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly (irregular color or no image).
T
T
Press the [MENU] button when you finish.
Selecting an Input Signal Type (3)
[Input signal select]
You can select an input signal type manually if a
video image from a AV equipment is not pro-
jected correctly.
T
T
Press the [MENU] button when you finish.
Display...")
92 SETTING UP FUNCTIONS FROM MENUS Selecting an Input Signal Type (2) [Input signal select] You can select an input signal type manually if a video image from a AV equipment is not pro- jected correctly (irregular color or no image). T T Press the [MENU] button when you finish. Selecting an Input Signal Type (3) [Input signal select] You can select an input signal type manually if a video image from a AV equipment is not pro- jected correctly. T T Press the [MENU] button when you finish. Display...
Page 93
![Page 93
93
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Total Number of Dots
[Total dots]
You can select the total number of dots in the
horizontal direction. Adjust the number of dots
when the image distorts or noise is displayed on
the screen at both sides.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Tracking
[Tracking]
You can fine-tune the timing for generating an
image from the image signal. Adjust the tracking
when the image flickers or distorts.
T
T
T
Press the...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-92.png "Page 93
93
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Total Number of Dots
[Total dots]
You can select the total number of dots in the
horizontal direction. Adjust the number of dots
when the image distorts or noise is displayed on
the screen at both sides.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Tracking
[Tracking]
You can fine-tune the timing for generating an
image from the image signal. Adjust the tracking
when the image flickers or distorts.
T
T
T
Press the...")
93 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Adjusting the Total Number of Dots [Total dots] You can select the total number of dots in the horizontal direction. Adjust the number of dots when the image distorts or noise is displayed on the screen at both sides. T T T Press the [MENU] button when you finish. Adjusting the Tracking [Tracking] You can fine-tune the timing for generating an image from the image signal. Adjust the tracking when the image flickers or distorts. T T T Press the...
Page 94
![Page 94
94
SETTING UP FUNCTIONS FROM MENUS
Adjusting the Horizontal Position
[Horizontal position]
You can adjust the horizontal position of the
screen when the projected image is shifted in
the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Vertical Position
[Vertical position]
You can adjust the vertical position of the screen
when the projected image is shifted in the verti-
cal direction.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-93.png "Page 94
94
SETTING UP FUNCTIONS FROM MENUS
Adjusting the Horizontal Position
[Horizontal position]
You can adjust the horizontal position of the
screen when the projected image is shifted in
the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Vertical Position
[Vertical position]
You can adjust the vertical position of the screen
when the projected image is shifted in the verti-
cal direction.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal...")
94 SETTING UP FUNCTIONS FROM MENUS Adjusting the Horizontal Position [Horizontal position] You can adjust the horizontal position of the screen when the projected image is shifted in the horizontal direction. T T T Press the [MENU] button when you finish. Adjusting the Vertical Position [Vertical position] You can adjust the vertical position of the screen when the projected image is shifted in the verti- cal direction. T T T Press the [MENU] button when you finish. Display settings Input signal...
Page 95
![Page 95
95
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Number of Horizontal Pixels
[Horizontal pixels]
You can adjust the number of the pixels in the
horizontal direction if the length of the screen is
too long or too short in the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Number of Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in the
vertical direction if the length of the screen is too
long or too short in the vertical...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-94.png "Page 95
95
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Adjusting the Number of Horizontal Pixels
[Horizontal pixels]
You can adjust the number of the pixels in the
horizontal direction if the length of the screen is
too long or too short in the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Number of Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in the
vertical direction if the length of the screen is too
long or too short in the vertical...")
95 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Adjusting the Number of Horizontal Pixels [Horizontal pixels] You can adjust the number of the pixels in the horizontal direction if the length of the screen is too long or too short in the horizontal direction. T T T Press the [MENU] button when you finish. Adjusting the Number of Vertical Pixels [Vertical pixels] You can adjust the number of the pixels in the vertical direction if the length of the screen is too long or too short in the vertical...
Page 96
![Page 96
96
SETTING UP FUNCTIONS FROM MENUS
Performing Progressive Processing
[Progressive]
You can accumulate and composite information
for a signal for a low resolution image to convert
it to a high resolution image.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Menu Position
[Menu position]
You can select the position of the menu dis-
played on the screen.
T
T
Move the menu to the desired position with [ ],
[], and then press the [OK] button.
Press the [MENU] button when...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-95.png "Page 96
96
SETTING UP FUNCTIONS FROM MENUS
Performing Progressive Processing
[Progressive]
You can accumulate and composite information
for a signal for a low resolution image to convert
it to a high resolution image.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Menu Position
[Menu position]
You can select the position of the menu dis-
played on the screen.
T
T
Move the menu to the desired position with [ ],
[], and then press the [OK] button.
Press the [MENU] button when...")
96 SETTING UP FUNCTIONS FROM MENUS Performing Progressive Processing [Progressive] You can accumulate and composite information for a signal for a low resolution image to convert it to a high resolution image. T T Press the [OK] button to confirm, and then press the [MENU] button. Selecting a Menu Position [Menu position] You can select the position of the menu dis- played on the screen. T T Move the menu to the desired position with [ ], [], and then press the [OK] button. Press the [MENU] button when...
Page 97
![Page 97
97
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Performing the Ceiling-mounted/Rear
Projection
[Image flip H/V]
You can make this setting if you want to hang the
projector from the ceiling or project an image on
a transmissive screen.
T
T
Press the [MENU] button when you finish.
Display settingsImage flip H/V
Select this if you project an image
normally.
Select this if you project an image
with the projector hung from the
ceiling. The projected image is
inverted in both vertical and hori-...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-96.png "Page 97
97
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Performing the Ceiling-mounted/Rear
Projection
[Image flip H/V]
You can make this setting if you want to hang the
projector from the ceiling or project an image on
a transmissive screen.
T
T
Press the [MENU] button when you finish.
Display settingsImage flip H/V
Select this if you project an image
normally.
Select this if you project an image
with the projector hung from the
ceiling. The projected image is
inverted in both vertical and hori-...")
97 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Performing the Ceiling-mounted/Rear Projection [Image flip H/V] You can make this setting if you want to hang the projector from the ceiling or project an image on a transmissive screen. T T Press the [MENU] button when you finish. Display settingsImage flip H/V Select this if you project an image normally. Select this if you project an image with the projector hung from the ceiling. The projected image is inverted in both vertical and hori-...
Page 98
![Page 98
98
SETTING UP FUNCTIONS FROM MENUS
Correcting the Screen Color
[Screen color]
You can adjust the while balance so that white
portions of the image are displayed correctly.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Capturing a Logo to Be Projected
(SX60)
[Logo capture]
You can project a desired image (logo) when
you turn on the projector, there is no input signal,
or you blacken a projecting image temporarily.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU]...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-97.png "Page 98
98
SETTING UP FUNCTIONS FROM MENUS
Correcting the Screen Color
[Screen color]
You can adjust the while balance so that white
portions of the image are displayed correctly.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Capturing a Logo to Be Projected
(SX60)
[Logo capture]
You can project a desired image (logo) when
you turn on the projector, there is no input signal,
or you blacken a projecting image temporarily.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU]...")
98 SETTING UP FUNCTIONS FROM MENUS Correcting the Screen Color [Screen color] You can adjust the while balance so that white portions of the image are displayed correctly. T T Press the [OK] button to confirm, and then press the [MENU] button. Capturing a Logo to Be Projected (SX60) [Logo capture] You can project a desired image (logo) when you turn on the projector, there is no input signal, or you blacken a projecting image temporarily. T T T Press the [OK] button to confirm, and then press the [MENU]...
Page 99
![Page 99
99
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Logo Display Position
(SX60)
[Logo position]
You can select a logo display position. You can
place the logo at the center or a corner of the
screen.
T
T
T
Press the [MENU] button when you finish.
Displaying a Logo (No signal screen)
[No signal screen]
You can display a user logo on a screen when
there is no input signal. (SX60)
For SX7 MarkII, you can display either of a black
or blue screen.
T
T
T
Press the [OK] button to confirm,...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-98.png "Page 99
99
SETTING UP FUNCTIONS FROM MENUS
Setting Display Status
Selecting a Logo Display Position
(SX60)
[Logo position]
You can select a logo display position. You can
place the logo at the center or a corner of the
screen.
T
T
T
Press the [MENU] button when you finish.
Displaying a Logo (No signal screen)
[No signal screen]
You can display a user logo on a screen when
there is no input signal. (SX60)
For SX7 MarkII, you can display either of a black
or blue screen.
T
T
T
Press the [OK] button to confirm,...")
99 SETTING UP FUNCTIONS FROM MENUS Setting Display Status Selecting a Logo Display Position (SX60) [Logo position] You can select a logo display position. You can place the logo at the center or a corner of the screen. T T T Press the [MENU] button when you finish. Displaying a Logo (No signal screen) [No signal screen] You can display a user logo on a screen when there is no input signal. (SX60) For SX7 MarkII, you can display either of a black or blue screen. T T T Press the [OK] button to confirm,...
Page 100
![Page 100
100
SETTING UP FUNCTIONS FROM MENUS
Displaying a Logo (NO SHOW)
[NO SHOW]
You can display a user logo on a screen when
the projected image is blackened out tempo-
rarily by pressing the [NO SHOW] button on the
remote control. (SX60)
For SX7 MarkII, you can display either of a black
or blue screen.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Logo at Startup
[Projector on]
You can display a specified logo on a screen
from the moment the projector is turned on to...](http://img.usermanuals.tech/thumb/14/1329/w300_projector-realis-sx60-1478292901_d-99.png "Page 100
100
SETTING UP FUNCTIONS FROM MENUS
Displaying a Logo (NO SHOW)
[NO SHOW]
You can display a user logo on a screen when
the projected image is blackened out tempo-
rarily by pressing the [NO SHOW] button on the
remote control. (SX60)
For SX7 MarkII, you can display either of a black
or blue screen.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Logo at Startup
[Projector on]
You can display a specified logo on a screen
from the moment the projector is turned on to...")
100 SETTING UP FUNCTIONS FROM MENUS Displaying a Logo (NO SHOW) [NO SHOW] You can display a user logo on a screen when the projected image is blackened out tempo- rarily by pressing the [NO SHOW] button on the remote control. (SX60) For SX7 MarkII, you can display either of a black or blue screen. T T T Press the [OK] button to confirm, and then press the [MENU] button. Selecting a Logo at Startup [Projector on] You can display a specified logo on a screen from the moment the projector is turned on to...