Canon projector LVWX300UST User Manual

 
— 35— 
Audio 
Press OK / ► to enter the Audio sub menu. 
 
ITEM DESCRIPTION 
Volume Press the ◄► buttons to enter and adjust the audio volume.  
Mute Press the ◄► buttons to enter and turn on or off the speaker. 
  

 
— 36— 
Installation I Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Installation I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. 
Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Language Press the cursor ◄► button to select a different localization Menu. 
Blank Screen Press the cursor ◄► button to select different color to blank the screen. 
Image Flip H/V Press the cursor ◄► button to choose from four Image...

 
— 37— 
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Installation I menu. 
Press ▲▼ to move to the Advanced menu and then press OK or ►. Press ▲▼ to move up and 
down in the Advanced menu. Press ◄► to change values for setting. 
 
ITEM DESCRIPTION 
Security Lock Press the cursor ◄► button to enable or disable security lock functionK 
Wall Color Press the cursor ◄► button to enable or disable wall color functionK 
Presentation Timer Press OK / ► to go to the...

 
— 38— 
Installation II Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Installation II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu.  
 
ITEM DESCRIPTION 
Auto Search Press the cursor ◄► button to enable or disable automatic source detection. 
Auto Power Off 
(min.) 
Press the cursor ◄► button to enable or disable automatic shutdown of lamp when 
no signal.  
Direct Power On Press the cursor ◄► button to enable or disable...

 
— 39— 
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. 
Press ▲▼ to move to the Advanced menu and then press OK or ►. Press ▲▼ to move up and 
down in the Advanced menu. Press ◄► to change values for setting. 
 
ITEM DESCRIPTION 
OSD Menu Setting Press OK / ► to enter the OSD setting menu. See page 40 for more information on 
OSD Menu Setting. 
Peripheral Test Press OK / ► to enter the Peripheral Test menu. See page 40 for more information on...

 
— 40— 
OSD Menu Setting  
 
ITEM DESCRIPTION 
Menu Position Press ◄► button to select different OSD location. 
Translucent Menu Press ◄► button to select OSD background translucent level.  
Menu Display Press ◄► button to select OSD timeout delay. 
Peripheral Test 
 
ITEM DESCRIPTION 
Remote Control 
Test Press OK / ► to test the IR remote controller for diagnostic.  
Color Test Press OK / ► to select different colors on screenK 
USB Test Press OK / ► to test the USB connection with connected PC.  

 
— 41— 
Reset Lamp Time 
 
Please refer to Resetting the Lamp on page 54 to reset the lamp hour counter. 
3D 
 
ITEM DESCRIPTION 
3D Press ◄► to select Off, DLPJLink or IRK 
3D Sync Invert Press ◄► to turn 3D Sync Invert On or Off. 
3D Format Press ◄► to enable or disable 3D Format. 
 
  

 
— 42— 
Network Setting 
 
ITEM DESCRIPTION 
Network State Displays the network connection status. 
DHCP 
Press ◄► to turn DHCP On or Off.  
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and 
DNS fields. 
IP Address  Enter a valid IP address if DHCP is turned off. 
Subnet Mask Enter a valid Subnet Mask if DHCP is turned off. 
Gateway Enter a valid Gateway address if DHCP is turned off. 
DNS Enter a valid DNS name if DHCP is turned off. 
Apply Press OK / ► to confirm...

 
— 43— 
For simplicity and ease of operation, the projector provides diverse networking and remote 
management features. 
The LAN/RJ45 function of the projector through a network, such as remotely manage: Power On/Off, 
Brightness and Contrast settings. Also, projector status information, such as: Video-Source, Sound-
Mute, etc. 
 
The projector can be controlled by a PC (Laptop) or other external device with connecting to the 
projectors LAN/RJ45 port. 
Wired LAN Terminal functionalites 
Remote control...

 
— 44— 
LAN RJ45 
1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). 
 
2. On the PC (Laptop), select Start → Control Panel  → Network and Internet.