Canon projector LVWX300UST User Manual

 
— 5— 
Federal Communication Commission Notice 
Multimedia Projector, Model: LV-WX300UST/LV-WX300USTi 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: 
(1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that may cause undesired 
operation. 
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15...

 
— 6— 
Precautions for Use 
As this section contains important safety-related information, be sure to read the following carefully 
beforehand in order to use your projector correctly and safely. 
 
If the following situations occur, turn the power off, remove the power plug from the power outlet and 
contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric 
shock. 
• If smoke is emitted 
• If an unusual smell or noise is emitted 
• If a loud noise is heard...

 
— 7— 
 
 
Pay attention to the following points regarding the power source, power plug and handling of the 
connector. Failure to do so could result in a fire, electric shock or personal injury. 
• Do not use any power source with a voltage other than the voltage indicated (AC 100 – 240 V). 
• Do not pull the power cord and be sure to hold the power plug or connector when removing. The cord 
could be damaged as a result. 
• Do not insert any metal objects into the contact parts of the power plug or...

 
— 8— 
 
Pay attention to the following points regarding installation and handling of the projector. 
• If the projector will not be used for a long period of time, be sure to remove the power plug from the 
power outlet to ensure safety. Failure to do so could cause a fire. 
• The temperature of the cabinet around and above the exhaust vents can become hot during projector 
operation. Touching these areas during operation could cause burns to the hands. Do not touch these 
areas. Doing so may cause...

 
— 9— 
 
 
Precautions when replacing lamps that stop working 
• If illumination suddenly stops, either when you turn the projector on or after it has been on for a while, 
the lamp may have ruptured. In this case, never attempt to replace the lamp by yourself. Always 
request service from the Canon Customer Support Center. Additionally, with ceiling-mounted 
projectors, the lamp may fall out when you open the lamp cover or while you are attempting to replace 
it. 
• During replacement, stand to the...

 
— 10— 
For Safe Use 
Pay attention to the following points when carrying or transporting the projector. 
• This projector is a precision instrument. Do not knock it over or subject it to impacts. Doing so may 
cause a malfunction. 
• Do not reuse any packaging or shock-absorbent materials that were supplied with the projector at the 
time of purchase for transporting or shipping the projector. Protection of the projector cannot be 
guaranteed if used packaging or shock-absorbent materials are reused....

 — 11— 
GETTING STARTED 
Packing Checklist 
Carefully unpack the projector and check that the following items are included:   
 
LV-WX300UST LV-WX300UST
I  
   
R
EMOTE CONTROL  
(WITH ONE 3V CR2025 BATTERY)  POWER CORD (1.8 M / 5.9)  COMPUTER CABLE (1.8 M / 5.9) 
(
MINI D-SUB 15-PIN / MINI D-SUB 15-PIN) 
   
CD-ROM
  
(T
HIS USER’S MANUAL)  IMPORTANT INFORMATION WARRANTY CARD 
  The Following ITEMS only for LV-WX300USTi   
    
CD-ROM 
(I
NTERACTIVE DRIVER AND 
SOFTWARE)  USB
 CABLE 
(A-T
YPE TO MINI...

 
— 12— 
Views of Projector Parts  
Front-right View 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  Lamp cover Removes cover to replace lamp module / unit ---> lamp 
2.  IR receiver Receives IR signal from remote control 
3.  Lens Projection Lens 
4.  Focus ring Focuses the projected image 
5.  Function keys See Top view—OnJscreen Display (OSD) 
buttons and LEDsK 13 
6.  Interactive Camera Interactive function use 
*Not Available in LV-WX300UST 
7.  Aspheric mirror Reflects images 4576132  

 
— 13— 
Top view—On-screen Display (OSD) buttons and LEDs 
 
ITEM LABEL DESCRIPTION SEE 
PAGE: 
1.  MENU Opens and exits OSD menus 
25 
2.   
Navigates in the OSD 
Quick Menu – For Keystone 
3.  SOURCE Enter the Source menu 
4.   Navigates and changes settings in the OSD 25 
5.  OK Enter or confirm highlighted OSD menu item 
6.  AUTO Optimizes image size, position, and resolution 
7.   Navigates and changes settings in the OSD 
25 
8.   
Navigates in the OSD 
Quick Menu – For Keystone 
9.   Turns the...

 
— 14— 
Rear view 
     
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  Security bar For security and authorized usage 
56 2.  Kensington lock Secure to permanent object with a Kensington®  
Lock system 
3.  USB POWER (5V-2A) Connect the USB cable for power supply.(for Interactive function) 
*not available in LV-WX300UST 
4.  AUDIO L/R 
(For VIDEO/ S-VIDEO) Connect an AUDIO cable from the audio device 
5.  AUDIO IN 
(For VGA-1/ VGA-2) Connect an AUDIO cable from the audio device 
6.  AUDIO OUT Connect an AUDIO...